wavesharelib/RaspberryPi_JetsonNano/c/lib/e-Paper/EPD_5in79b.c

/*****************************************************************************
* | File      	:	EPD_5in79b.c
* | Author      :   Waveshare team
* | Function    :   Electronic paper driver
* | Info        :
*----------------
* |	This version:   V1.0
* | Date        :   2024-03-05
* | Info        :
******************************************************************************
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files(the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to  whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#include "EPD_5in79b.h"
#include "Debug.h"
#include <time.h>

/******************************************************************************
function :	Software reset
parameter:
******************************************************************************/
static void EPD_5in79b_Reset(void)
{
    DEV_Digital_Write(EPD_RST_PIN, 1);
    DEV_Delay_ms(200);
    DEV_Digital_Write(EPD_RST_PIN, 0);
    DEV_Delay_ms(1);
    DEV_Digital_Write(EPD_RST_PIN, 1);
    DEV_Delay_ms(200);
}

/******************************************************************************
function :	send command
parameter:
     Reg : Command register
******************************************************************************/
static void EPD_5in79b_SendCommand(UBYTE Reg)
{
    DEV_Digital_Write(EPD_DC_PIN, 0);
    DEV_Digital_Write(EPD_CS_PIN, 0);
    DEV_SPI_WriteByte(Reg);
    DEV_Digital_Write(EPD_CS_PIN, 1);
}

/******************************************************************************
function :	send data
parameter:
    Data : Write data
******************************************************************************/
static void EPD_5in79b_SendData(UBYTE Data)
{
    
    DEV_Digital_Write(EPD_CS_PIN, 0);
    DEV_Digital_Write(EPD_DC_PIN, 1);
    DEV_SPI_WriteByte(Data);
    DEV_Digital_Write(EPD_CS_PIN, 1);
}

/******************************************************************************
function :	Wait until the busy_pin goes LOW
parameter:
******************************************************************************/
void EPD_5in79b_WaitUntilIdle(void)
{
    Debug("e-Paper busy\r\n");
	UBYTE busy;
	do
	{
		busy = DEV_Digital_Read(EPD_BUSY_PIN);
        DEV_Delay_ms(10);   
	}
	while(busy);   
	DEV_Delay_ms(200);     
    Debug("e-Paper busy release\r\n");
}

/******************************************************************************
function :	Turn On Display
parameter:
******************************************************************************/
static void EPD_5in79b_TurnOnDisplay(void)
{
    EPD_5in79b_SendCommand(0x22);
    EPD_5in79b_SendData(0xF7);              // 24s  // 0xD7  16s  Probability refresh bad, probability damage ink screen
	EPD_5in79b_SendCommand(0x20);			//DISPLAY REFRESH 	
	DEV_Delay_ms(100);	        //!!!The delay here is necessary, 200uS at least!!!     
	EPD_5in79b_WaitUntilIdle();        //waiting for the electronic paper IC to release the idle signal
}

/******************************************************************************
function :	Initialize the e-Paper register
parameter:
******************************************************************************/
UBYTE EPD_5in79b_Init(void)
{
    EPD_5in79b_Reset();

    EPD_5in79b_WaitUntilIdle();        //waiting for the electronic paper IC to release the idle signal
	EPD_5in79b_SendCommand(0x12); //POWER ON
	EPD_5in79b_WaitUntilIdle();        //waiting for the electronic paper IC to release the idle signal
	
    EPD_5in79b_SendCommand(0x11);
    EPD_5in79b_SendData(0x01);
    EPD_5in79b_SendCommand(0x44);	 						 // Set Ram X- address Start / End position
	EPD_5in79b_SendData(0x00);     						 // XStart, POR = 00h
	EPD_5in79b_SendData(0x31); //400/8-1
	EPD_5in79b_SendCommand(0x45);	 									// Set Ram Y- address  Start / End position 
	EPD_5in79b_SendData(0x0f);  
	EPD_5in79b_SendData(0x01);  //300-1	
	EPD_5in79b_SendData(0x00);     									// YEnd L
	EPD_5in79b_SendData(0x00);											// YEnd H 

    EPD_5in79b_SendCommand(0x4e);	 						 
	EPD_5in79b_SendData(0x00);	
	EPD_5in79b_SendCommand(0x4f);	 
	EPD_5in79b_SendData(0x0f);  
	EPD_5in79b_SendData(0x01); 	

    
    EPD_5in79b_SendCommand(0x91);
    EPD_5in79b_SendData(0x00);

    EPD_5in79b_SendCommand(0xC4);							 // Set Ram X- address Start / End position
	EPD_5in79b_SendData(0x31);     						 // XStart, POR = 00h
	EPD_5in79b_SendData(0x00); //400/8-1
	EPD_5in79b_SendCommand(0xC5);	 									// Set Ram Y- address  Start / End position 
	EPD_5in79b_SendData(0x0f);  
	EPD_5in79b_SendData(0x01);  //300-1	
	EPD_5in79b_SendData(0x00);     									// YEnd L
	EPD_5in79b_SendData(0x00);											// YEnd H 

    EPD_5in79b_SendCommand(0xCe);	 						 
	EPD_5in79b_SendData(0x31);	
	EPD_5in79b_SendCommand(0xCf);	 
	EPD_5in79b_SendData(0x0f);  
	EPD_5in79b_SendData(0x01);
    return 0;
}

/******************************************************************************
function :	Clear screen
parameter:
******************************************************************************/
void EPD_5in79b_Clear(void)
{
    UDOUBLE i;
    // M part 396*272
    EPD_5in79b_SendCommand(0x24);
    for(i=0; i<13600; i++) 
    {
        EPD_5in79b_SendData(0xff);
    }
    EPD_5in79b_SendCommand(0X26);
    for(i=0; i<13600; i++)	
    {
        EPD_5in79b_SendData(0x00);
    }

    // S part 396*272
    EPD_5in79b_SendCommand(0xA4);
    for(i=0; i<13600; i++) 
    {
        EPD_5in79b_SendData(0xff);
    }
    EPD_5in79b_SendCommand(0xA6);
    for(i=0; i<13600; i++)	
    {
        EPD_5in79b_SendData(0x00);
    }

    EPD_5in79b_TurnOnDisplay();
}

/******************************************************************************
function :	Sends the image buffer in RAM to e-Paper and displays
parameter:
******************************************************************************/
void EPD_5in79b_Display(const UBYTE *blackimage, const UBYTE *ryimage)
{
    UDOUBLE Width, Width1, Height;
    Width =(EPD_5in79b_WIDTH % 16 == 0)?(EPD_5in79b_WIDTH / 16 ):(EPD_5in79b_WIDTH / 16 + 1);
    Width1 =(EPD_5in79b_WIDTH % 8 == 0)?(EPD_5in79b_WIDTH / 8 ):(EPD_5in79b_WIDTH / 8 + 1);
    Height = EPD_5in79b_HEIGHT;

    // M part 396*272
    EPD_5in79b_SendCommand(0x24);
    for (UDOUBLE j = 0; j < Height; j++) {
        for (UDOUBLE i = 0; i < Width; i++) {
            EPD_5in79b_SendData(blackimage[j * Width1 + i]);
        }
    }
    EPD_5in79b_SendCommand(0X26);
    for (UDOUBLE j = 0; j < Height; j++) {
        for (UDOUBLE i = 0; i < Width; i++) {
            EPD_5in79b_SendData(~ryimage[j * Width1 + i]);
        }
    }

    // S part 396*272
    EPD_5in79b_SendCommand(0xA4);
    for (UDOUBLE j = 0; j < Height; j++) {
        for (UDOUBLE i = 0; i < Width; i++) {
            EPD_5in79b_SendData(blackimage[j * Width1 + i + Width - 1]);
        }
    }
    EPD_5in79b_SendCommand(0XA6);
    for (UDOUBLE j = 0; j < Height; j++) {
        for (UDOUBLE i = 0; i < Width; i++) {
            EPD_5in79b_SendData(~ryimage[j * Width1 + i + Width - 1]);
        }
    }

    EPD_5in79b_TurnOnDisplay();
}

/******************************************************************************
function :	Enter sleep mode
parameter:
******************************************************************************/
void EPD_5in79b_Sleep(void)
{
    EPD_5in79b_SendCommand(0X10);  	//deep sleep
    EPD_5in79b_SendData(0x03);
}