wavesharelib/Arduino/epd2in13_V3/epd2in13_V3.cpp

/*****************************************************************************
* | File      	:   epd2in13_V3.cpp
* | Author      :   Waveshare team
* | Function    :   2.13inch e-paper V3
* | Info        :
*----------------
* |	This version:   V1.0
* | Date        :   2021-11-01
* | Info        :
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to  whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#include <stdlib.h>
#include "epd2in13_V3.h"

const unsigned char lut_full_update[]= {
	0x80,	0x4A,	0x40,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,
	0x40,	0x4A,	0x80,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,
	0x80,	0x4A,	0x40,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,
	0x40,	0x4A,	0x80,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,
	0xF,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0xF,	0x0,	0x0,	0xF,	0x0,	0x0,	0x2,					
	0xF,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x1,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,	0x0,					
	0x22,	0x22,	0x22,	0x22,	0x22,	0x22,	0x0,	0x0,	0x0,			
	0x22,	0x17,	0x41,	0x0,	0x32,	0x36	
};

const unsigned char lut_partial_update[]= { 
	0x0,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x80,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x40,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x14,0x0,0x0,0x0,0x0,0x0,0x0,  
	0x1,0x0,0x0,0x0,0x0,0x0,0x0,
	0x1,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x0,0x0,0x0,0x0,0x0,0x0,0x0,
	0x22,0x22,0x22,0x22,0x22,0x22,0x0,0x0,0x0,
	0x22,0x17,0x41,0x00,0x32,0x36,
};

Epd::~Epd()
{
};

/******************************************************************************
function :	Pin definition
parameter:
******************************************************************************/
Epd::Epd()
{
    reset_pin = RST_PIN;
    dc_pin = DC_PIN;
    cs_pin = CS_PIN;
    busy_pin = BUSY_PIN;
    width = EPD_WIDTH;
    height = EPD_HEIGHT;
    bufwidth = 128/8;  //16
    bufheight = 63;
};

/******************************************************************************
function :	send command
parameter:
     command : Command register
******************************************************************************/
void Epd::SendCommand(unsigned char command)
{
    DigitalWrite(dc_pin, LOW);
    SpiTransfer(command);
}

/******************************************************************************
function :	send data
parameter:
    Data : Write data
******************************************************************************/
void Epd::SendData(unsigned char data)
{
    DigitalWrite(dc_pin, HIGH);
    SpiTransfer(data);
}

/******************************************************************************
function :	Wait until the busy_pin goes LOW
parameter:
******************************************************************************/
void Epd::WaitUntilIdle(void)
{
    while(1) {      //LOW: idle, HIGH: busy
        if(DigitalRead(busy_pin) == 0)
            break;
        DelayMs(10);
    }
}

/******************************************************************************
function :	Setting the display window
parameter:
	Xstart : X-axis starting position
	Ystart : Y-axis starting position
	Xend : End position of X-axis
	Yend : End position of Y-axis
******************************************************************************/
void Epd::SetWindows(unsigned char Xstart, unsigned char Ystart, unsigned char Xend, unsigned char Yend)
{
    SendCommand(0x44); // SET_RAM_X_ADDRESS_START_END_POSITION
    SendData((Xstart>>3) & 0xFF);
    SendData((Xend>>3) & 0xFF);
	
    SendCommand(0x45); // SET_RAM_Y_ADDRESS_START_END_POSITION
    SendData(Ystart & 0xFF);
    SendData((Ystart >> 8) & 0xFF);
    SendData(Yend & 0xFF);
    SendData((Yend >> 8) & 0xFF);
}

/******************************************************************************
function :	Set Cursor
parameter:
	Xstart : X-axis starting position
	Ystart : Y-axis starting position
******************************************************************************/
void Epd::SetCursor(unsigned char Xstart, unsigned char Ystart)
{
    SendCommand(0x4E); // SET_RAM_X_ADDRESS_COUNTER
    SendData(Xstart & 0xFF);

    SendCommand(0x4F); // SET_RAM_Y_ADDRESS_COUNTER
    SendData(Ystart & 0xFF);
    SendData((Ystart >> 8) & 0xFF);
}

/******************************************************************************
function :	Send lut data and configuration
parameter:	
    lut :   lut data
******************************************************************************/
void Epd::Lut(unsigned char *lut)
{
	unsigned char count;
	SendCommand(0x32);
	for(count = 0; count < 153; count++) {
		SendData(lut[count]);
	}

	SendCommand(0x3f);
	SendData(*(lut+153));
	SendCommand(0x03);	// gate voltage
	SendData(*(lut+154));
	SendCommand(0x04);	// source voltage
	SendData(*(lut+155));	// VSH
	SendData(*(lut+156));	// VSH2
	SendData(*(lut+157));	// VSL
	SendCommand(0x2c);		// VCOM
	SendData(*(lut+158));
}

/******************************************************************************
function :	Initialize the e-Paper register
parameter:
	Mode : Mode selection
******************************************************************************/
int Epd::Init(char Mode)
{
    /* this calls the peripheral hardware interface, see epdif */
    if (IfInit() != 0) {
        return -1;
    }
    
    Reset();
    
    int count;
    if(Mode == FULL) {
        WaitUntilIdle();
        SendCommand(0x12); // soft reset
        WaitUntilIdle();

        SendCommand(0x01); //Driver output control
        SendData(0xF9);
        SendData(0x00);
        SendData(0x00);

        SendCommand(0x11); //data entry mode
        SendData(0x03);

		SetWindows(0, 0, EPD_WIDTH-1, EPD_HEIGHT-1);
		SetCursor(0, 0);
		
		SendCommand(0x3C); //BorderWavefrom
		SendData(0x05);	

		SendCommand(0x21); //  Display update control
		SendData(0x00);
		SendData(0x80);	

		SendCommand(0x18); //Read built-in temperature sensor
		SendData(0x80);	

		WaitUntilIdle();
		Lut(lut_full_update);
    } else if(Mode == PART) {	
	
		DigitalWrite(reset_pin, LOW);                //module reset
		DelayMs(1);
		DigitalWrite(reset_pin, HIGH);

		Lut(lut_partial_update);
		
        SendCommand(0x37);
        SendData(0x00);
        SendData(0x00);
        SendData(0x00);
        SendData(0x00);
		SendData(0x00);
        SendData(0x40);
        SendData(0x00);
		SendData(0x00);
		SendData(0x00);
        SendData(0x00);

		SendCommand(0x3C); //BorderWavefrom
		SendData(0x80);	
	
		SendCommand(0x22); //Display Update Sequence Option
		SendData(0xC0);    // Enable clock and  Enable analog
		SendCommand(0x20);  //Activate Display Update Sequence
		WaitUntilIdle();  
		
		SetWindows(0, 0, EPD_WIDTH-1, EPD_HEIGHT-1);
		SetCursor(0, 0);
    } else {
        return -1;
    }

    return 0;
}

/******************************************************************************
function :	Software reset
parameter:
******************************************************************************/
void Epd::Reset(void)
{
    DigitalWrite(reset_pin, HIGH);
    DelayMs(20);
    DigitalWrite(reset_pin, LOW);                //module reset
    DelayMs(2);
    DigitalWrite(reset_pin, HIGH);
    DelayMs(20);
    this->count = 0; 
}

/******************************************************************************
function :	Clear screen
parameter:
******************************************************************************/
void Epd::Clear(void)
{
    int w, h;
    w = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
    h = EPD_HEIGHT;
    SendCommand(0x24);
    for (int j = 0; j < h; j++) {
        for (int i = 0; i < w; i++) {
            SendData(0xff);
        }
    }

    //DISPLAY REFRESH
    SendCommand(0x22);
    SendData(0xC7);
    SendCommand(0x20);
    WaitUntilIdle();
}

/******************************************************************************
function :	Sends the image buffer in RAM to e-Paper and displays
parameter:
	frame_buffer : Image data
******************************************************************************/
void Epd::Display(const unsigned char* frame_buffer)
{
    int w = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
    int h = EPD_HEIGHT;

    if (frame_buffer != NULL) {
        SendCommand(0x24);
        for (int j = 0; j < h; j++) {
            for (int i = 0; i < w; i++) {
                SendData(pgm_read_byte(&frame_buffer[i + j * w]));
            }
        }
    }

    //DISPLAY REFRESH
    SendCommand(0x22);
    SendData(0xC7);
    SendCommand(0x20);
    WaitUntilIdle();
}



void Epd::Display1(const unsigned char* frame_buffer) {
    if(this->count == 0){
        SendCommand(0x24);
        this->count++;
    }else if(this->count > 0 && this->count < 4 ){
        this->count++;
    }
    for(int i = 0; i < this->bufwidth * this->bufheight; i++){
            SendData(frame_buffer[i]);
    }
    if(this->count == 4){
        SendCommand(0x22);
        SendData(0xC7);
        SendCommand(0x20);
        WaitUntilIdle();
        this->count = 0;
    }
}

/******************************************************************************
function :	Refresh a base image
parameter:
	frame_buffer : Image data	
******************************************************************************/
void Epd::DisplayPartBaseImage(const unsigned char* frame_buffer)
{
    int w = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
    int h = EPD_HEIGHT;

    if (frame_buffer != NULL) {
        SendCommand(0x24);
        for (int j = 0; j < h; j++) {
            for (int i = 0; i < w; i++) {
                SendData(pgm_read_byte(&frame_buffer[i + j * w]));
            }
        }

        SendCommand(0x26);
        for (int j = 0; j < h; j++) {
            for (int i = 0; i < w; i++) {
                SendData(pgm_read_byte(&frame_buffer[i + j * w]));
            }
        }
    }

    //DISPLAY REFRESH
    SendCommand(0x22);
    SendData(0xC7);
    SendCommand(0x20);
    WaitUntilIdle();
}

/******************************************************************************
function :	Sends the image buffer in RAM to e-Paper and partial refresh
parameter:
	frame_buffer : Image data
******************************************************************************/
void Epd::DisplayPart(const unsigned char* frame_buffer)
{
    int w = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
    int h = EPD_HEIGHT;

    if (frame_buffer != NULL) {
        SendCommand(0x24);
        for (int j = 0; j < h; j++) {
            for (int i = 0; i < w; i++) {
                SendData(pgm_read_byte(&frame_buffer[i + j * w]));
            }
        }
    }

    //DISPLAY REFRESH
    SendCommand(0x22);
    SendData(0x0f);
    SendCommand(0x20);
    WaitUntilIdle();
}

/******************************************************************************
function :	Clear screen
parameter:
******************************************************************************/
void Epd::ClearPart(void)
{
    int w, h;
    w = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
    h = EPD_HEIGHT;
    SendCommand(0x24);
    for (int j = 0; j < h; j++) {
        for (int i = 0; i < w; i++) {
            SendData(0xff);
        }
    }

    //DISPLAY REFRESH
    SendCommand(0x22);
    SendData(0x0f);
    SendCommand(0x20);
    WaitUntilIdle();
}

/******************************************************************************
function :	Enter sleep mode
parameter:
******************************************************************************/
void Epd::Sleep()
{
    SendCommand(0x10); //enter deep sleep
    SendData(0x01);
    DelayMs(200);

    DigitalWrite(reset_pin, LOW);
}

/* END OF FILE */