wavesharelib/Arduino_R4/src/e-Paper/EPD_4in2b_V2_old.cpp

/*****************************************************************************
* | File      	:   EPD_4in2b_V2.c
* | Author      :   Waveshare team
* | Function    :   4.2inch e-paper b V2
* | Info        :
*----------------
* |	This version:   V1.0
* | Date        :   2020-11-25
* | Info        :
* -----------------------------------------------------------------------------
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to  whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#include "EPD_4in2b_V2_old.h"

static uint8_t flag=0;

/******************************************************************************
function :	Software reset
parameter:
******************************************************************************/
static void EPD_4IN2B_V2_Reset(void)
{
    DEV_Digital_Write(EPD_RST_PIN, 1);
    DEV_Delay_ms(200);
    DEV_Digital_Write(EPD_RST_PIN, 0);
    DEV_Delay_ms(2);
    DEV_Digital_Write(EPD_RST_PIN, 1);
    DEV_Delay_ms(200);
}

/******************************************************************************
function :	send command
parameter:
     Reg : Command register
******************************************************************************/
static void EPD_4IN2B_V2_SendCommand(UBYTE Reg)
{
    DEV_Digital_Write(EPD_DC_PIN, 0);
    DEV_Digital_Write(EPD_CS_PIN, 0);
    DEV_SPI_WriteByte(Reg);
    DEV_Digital_Write(EPD_CS_PIN, 1);
}

/******************************************************************************
function :	send data
parameter:
    Data : Write data
******************************************************************************/
static void EPD_4IN2B_V2_SendData(UBYTE Data)
{
    DEV_Digital_Write(EPD_DC_PIN, 1);
    DEV_Digital_Write(EPD_CS_PIN, 0);
    DEV_SPI_WriteByte(Data);
    DEV_Digital_Write(EPD_CS_PIN, 1);
}

/******************************************************************************
function :	Wait until the busy_pin goes LOW
parameter:
******************************************************************************/
void EPD_4IN2B_V2_ReadBusy_old_1(void)
{
    Debug("e-Paper busy\r\n");
	do{
		EPD_4IN2B_V2_SendCommand(0x71);
		DEV_Delay_ms(20);
	}while(!(DEV_Digital_Read(EPD_BUSY_PIN)));      //0: busy, 1: idle
    DEV_Delay_ms(20);
	Debug("e-Paper busy release\r\n");
}

void EPD_4IN2B_V2_ReadBusy_new_1(void)
{
    Debug("e-Paper busy\r\n");
    while(DEV_Digital_Read(EPD_BUSY_PIN) == 1) {      //LOW: idle, HIGH: busy
        DEV_Delay_ms(10);
    }
    Debug("e-Paper busy release\r\n");
}

void EPD_4IN2B_V2_ReadBusy_1(void)
{
    if(flag == 0)
        EPD_4IN2B_V2_ReadBusy_new_1();
    else
        EPD_4IN2B_V2_ReadBusy_old_1();
}

/******************************************************************************
function :	Setting the display window
parameter:
******************************************************************************/
static void EPD_4IN2B_V2_SetWindows(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend)
{
    EPD_4IN2B_V2_SendCommand(0x44); // SET_RAM_X_ADDRESS_START_END_POSITION
    EPD_4IN2B_V2_SendData((Xstart>>3) & 0xFF);
    EPD_4IN2B_V2_SendData((Xend>>3) & 0xFF);
	
    EPD_4IN2B_V2_SendCommand(0x45); // SET_RAM_Y_ADDRESS_START_END_POSITION
    EPD_4IN2B_V2_SendData(Ystart & 0xFF);
    EPD_4IN2B_V2_SendData((Ystart >> 8) & 0xFF);
    EPD_4IN2B_V2_SendData(Yend & 0xFF);
    EPD_4IN2B_V2_SendData((Yend >> 8) & 0xFF);
}

/******************************************************************************
function :	Set Cursor
parameter:
******************************************************************************/
static void EPD_4IN2B_V2_SetCursor(UWORD Xstart, UWORD Ystart)
{
    EPD_4IN2B_V2_SendCommand(0x4E); // SET_RAM_X_ADDRESS_COUNTER
    EPD_4IN2B_V2_SendData((Xstart>>3) & 0xFF);

    EPD_4IN2B_V2_SendCommand(0x4F); // SET_RAM_Y_ADDRESS_COUNTER
    EPD_4IN2B_V2_SendData(Ystart & 0xFF);
    EPD_4IN2B_V2_SendData((Ystart >> 8) & 0xFF);
}


/******************************************************************************
function :	Initialize the e-Paper register
parameter:
******************************************************************************/
void EPD_4IN2B_V2_Init_old_1(void)
{
    EPD_4IN2B_V2_Reset();

    EPD_4IN2B_V2_ReadBusy_1();   
    EPD_4IN2B_V2_SendCommand(0x04);   // soft  reset
    EPD_4IN2B_V2_ReadBusy_1();
    
    EPD_4IN2B_V2_SendCommand(0x00); //BorderWavefrom
    EPD_4IN2B_V2_SendData(0x0F);
}

void EPD_4IN2B_V2_Init_new_1(void)
{
    EPD_4IN2B_V2_Reset();

    EPD_4IN2B_V2_ReadBusy_1();   
    EPD_4IN2B_V2_SendCommand(0x12);   // soft  reset
    EPD_4IN2B_V2_ReadBusy_1();
	
    // EPD_4IN2B_V2_SendCommand(0x01); //Driver output control      
    // EPD_4IN2B_V2_SendData((EPD_4IN2B_V2_HEIGHT-1)%256);   
    // EPD_4IN2B_V2_SendData((EPD_4IN2B_V2_HEIGHT-1)/256);
    // EPD_4IN2B_V2_SendData(0x00);

    EPD_4IN2B_V2_SendCommand(0x3C); //BorderWavefrom
    EPD_4IN2B_V2_SendData(0x05);

    EPD_4IN2B_V2_SendCommand(0x18); //Read built-in temperature sensor
    EPD_4IN2B_V2_SendData(0x80);	
	
    EPD_4IN2B_V2_SendCommand(0x11);	// data  entry  mode
    EPD_4IN2B_V2_SendData(0x03);		// X-mode   
		
	EPD_4IN2B_V2_SetWindows(0, 0, EPD_4IN2B_V2_WIDTH-1, EPD_4IN2B_V2_HEIGHT-1);
	 
	EPD_4IN2B_V2_SetCursor(0, 0);
	
    EPD_4IN2B_V2_ReadBusy_1();
}

void EPD_4IN2B_V2_Init_1()
{
    uint8_t i=0;
    EPD_4IN2B_V2_Reset();
    
    DEV_GPIO_Init();
    DEV_Digital_Write(EPD_DC_PIN, 0);
    DEV_SPI_SendByte(0x2F);
    DEV_Delay_ms(50);
    
    DEV_Digital_Write(EPD_DC_PIN, 1);
    i = DEV_SPI_ReadByte();
    printf("%02x\n",i);
    
    DEV_SPI_Init();
    if(i == 0x01)
    {
        flag = 0;
        EPD_4IN2B_V2_Init_new_1();
    }
    else
    {
        flag = 1;
        EPD_4IN2B_V2_Init_old_1();
    }
}



/******************************************************************************
function :	Clear screen
parameter:
******************************************************************************/
void EPD_4IN2B_V2_Clear_old_1(void)
{
    UWORD Width, Height;
    Width = (EPD_4IN2B_V2_WIDTH % 8 == 0)? (EPD_4IN2B_V2_WIDTH / 8 ): (EPD_4IN2B_V2_WIDTH / 8 + 1);
    Height = EPD_4IN2B_V2_HEIGHT;

    EPD_4IN2B_V2_SendCommand(0x10);
    for (UWORD j = 0; j < Height; j++) {
        for (UWORD i = 0; i < Width; i++) {
            EPD_4IN2B_V2_SendData(0xFF);
        }
    }

    EPD_4IN2B_V2_SendCommand(0x13);
    for (UWORD j = 0; j < Height; j++) {
        for (UWORD i = 0; i < Width; i++) {
            EPD_4IN2B_V2_SendData(0xFF);
        }
    }

    EPD_4IN2B_V2_SendCommand(0x12);
    DEV_Delay_ms(100);
    EPD_4IN2B_V2_ReadBusy_1();
}


void EPD_4IN2B_V2_Clear_new_1(void)
{
    UWORD Width, Height;
    Width = (EPD_4IN2B_V2_WIDTH % 8 == 0)? (EPD_4IN2B_V2_WIDTH / 8 ): (EPD_4IN2B_V2_WIDTH / 8 + 1);
    Height = EPD_4IN2B_V2_HEIGHT;

    EPD_4IN2B_V2_SendCommand(0x24);
    for (UWORD j = 0; j < Height; j++) {
        for (UWORD i = 0; i < Width; i++) {
            EPD_4IN2B_V2_SendData(0xFF);
        }
    }

    EPD_4IN2B_V2_SendCommand(0x26);
    for (UWORD j = 0; j < Height; j++) {
        for (UWORD i = 0; i < Width; i++) {
            EPD_4IN2B_V2_SendData(0x00);
        }
    }

    EPD_4IN2B_V2_SendCommand(0x22);
	EPD_4IN2B_V2_SendData(0xF7);
    EPD_4IN2B_V2_SendCommand(0x20);
    EPD_4IN2B_V2_ReadBusy_1();
}

void EPD_4IN2B_V2_Clear_1(void)
{
    if(flag == 0)
        EPD_4IN2B_V2_Clear_new_1();
    else
        EPD_4IN2B_V2_Clear_old_1();
}

/******************************************************************************
function :	Sends the image buffer in RAM to e-Paper and displays
parameter:
******************************************************************************/
void EPD_4IN2B_V2_Display_old_1(const UBYTE *image, char flag_1)
{
    UWORD Width, Height;
    Width = (EPD_4IN2B_V2_WIDTH % 8 == 0)? (EPD_4IN2B_V2_WIDTH / 8 ): (EPD_4IN2B_V2_WIDTH / 8 + 1);
    Height = EPD_4IN2B_V2_HEIGHT;
    if(flag_1 == 0)
    {
        EPD_4IN2B_V2_SendCommand(0x10);
        for (UWORD j = 0; j < Height; j++) {
            for (UWORD i = 0; i < Width; i++) {
                EPD_4IN2B_V2_SendData(image[i + j * Width]);
            }
        }
    }
    else
    {
        EPD_4IN2B_V2_SendCommand(0x13);
        for (UWORD j = 0; j < Height; j++) {
            for (UWORD i = 0; i < Width; i++) {
                EPD_4IN2B_V2_SendData(image[i + j * Width]);
            }
        }

        EPD_4IN2B_V2_SendCommand(0x12);
        DEV_Delay_ms(100);
        EPD_4IN2B_V2_ReadBusy_1();
    }
}

void EPD_4IN2B_V2_Display_new_1(const UBYTE *image, char flag_1)
{
    UWORD Width, Height;
    Width = (EPD_4IN2B_V2_WIDTH % 8 == 0)? (EPD_4IN2B_V2_WIDTH / 8 ): (EPD_4IN2B_V2_WIDTH / 8 + 1);
    Height = EPD_4IN2B_V2_HEIGHT;

    if(flag_1 == 0)
    {
        EPD_4IN2B_V2_SendCommand(0x24);
        for (UWORD j = 0; j < Height; j++) {
            for (UWORD i = 0; i < Width; i++) {
                EPD_4IN2B_V2_SendData(image[i + j * Width]);
            }
        }
    }

    else
    {
        EPD_4IN2B_V2_SendCommand(0x26);
        for (UWORD j = 0; j < Height; j++) {
            for (UWORD i = 0; i < Width; i++) {
                EPD_4IN2B_V2_SendData(~image[i + j * Width]);
            }
        }
        EPD_4IN2B_V2_SendCommand(0x22);
        EPD_4IN2B_V2_SendData(0xF7);
        EPD_4IN2B_V2_SendCommand(0x20);
        EPD_4IN2B_V2_ReadBusy_1();
    }
}

void EPD_4IN2B_V2_Display_1(const UBYTE *image, char flag_1)
{
    if(flag == 0)
        EPD_4IN2B_V2_Display_new_1(image, flag_1);
    else
        EPD_4IN2B_V2_Display_old_1(image, flag_1);
}

/******************************************************************************
function :	Enter sleep mode
parameter:
******************************************************************************/
void EPD_4IN2B_V2_Sleep_old_1(void)
{
    EPD_4IN2B_V2_SendCommand(0X50);  	
    EPD_4IN2B_V2_SendData(0xf7);
    EPD_4IN2B_V2_SendCommand(0x02);  
    EPD_4IN2B_V2_ReadBusy_1();
    EPD_4IN2B_V2_SendCommand(0x07);  
    EPD_4IN2B_V2_SendData(0XA5);
}
void EPD_4IN2B_V2_Sleep_new_1(void)
{
    EPD_4IN2B_V2_SendCommand(0X10);  	//deep sleep
    EPD_4IN2B_V2_SendData(0x03);
}

void EPD_4IN2B_V2_Sleep_1(void)
{
    if(flag == 0)
        EPD_4IN2B_V2_Sleep_new_1();
    else
        EPD_4IN2B_V2_Sleep_old_1();
}