wavesharelib/Arduino/epd2in9_V2/epd2in9_V2.cpp

/**
 *  @filename   :   epd2in9_V2.cpp
 *  @brief      :   Implements for e-paper library
 *  @author     :  
 *
 *  Copyright (C) Waveshare     Nov 9 2020
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documnetation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to  whom the Software is
 * furished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include <stdlib.h>
#include "epd2in9_V2.h"

unsigned char WF_PARTIAL_2IN9[159] =
{
0x0,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x80,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x40,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0A,0x0,0x0,0x0,0x0,0x0,0x2,  
0x1,0x0,0x0,0x0,0x0,0x0,0x0,
0x1,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
0x22,0x22,0x22,0x22,0x22,0x22,0x0,0x0,0x0,
0x22,0x17,0x41,0xB0,0x32,0x36,
};

Epd::~Epd() {
};

Epd::Epd() {
    reset_pin = RST_PIN;
    dc_pin = DC_PIN;
    cs_pin = CS_PIN;
    busy_pin = BUSY_PIN;
    width = EPD_WIDTH;
    height = EPD_HEIGHT;
};

int Epd::Init() {
    /* this calls the peripheral hardware interface, see epdif */
    if (IfInit() != 0) {
        return -1;
    }
	
	Reset();
	
    /* EPD hardware init start */
	WaitUntilIdle();   
	SendCommand(0x12);  //SWRESET
	WaitUntilIdle();   
	
	SendCommand(0x01); //Driver output control      
	SendData(0x27);
	SendData(0x01);
	SendData(0x00);
	
	SendCommand(0x11); //data entry mode       
	SendData(0x03);

	SetMemoryArea(0, 0, width-1, height-1);

	SendCommand(0x21); //  Display update control
	SendData(0x00);
	SendData(0x80);	

	SetMemoryPointer(0, 0);
	WaitUntilIdle();
    /* EPD hardware init end */
    return 0;
}

/**
 *  @brief: basic function for sending commands
 */
void Epd::SendCommand(unsigned char command) {
    DigitalWrite(dc_pin, LOW);
    DigitalWrite(cs_pin, LOW);
    SpiTransfer(command);
    DigitalWrite(cs_pin, HIGH);
}

/**
 *  @brief: basic function for sending data
 */
void Epd::SendData(unsigned char data) {
    DigitalWrite(dc_pin, HIGH);
    DigitalWrite(cs_pin, LOW);
    SpiTransfer(data);
    DigitalWrite(cs_pin, HIGH);
}

/**
 *  @brief: Wait until the busy_pin goes LOW
 */
void Epd::WaitUntilIdle(void) {
	while(1) {	 //=1 BUSY
		if(DigitalRead(busy_pin)==LOW) 
			break;
		DelayMs(50);
	}
	DelayMs(50);
}

/**
 *  @brief: module reset.
 *          often used to awaken the module in deep sleep,
 *          see Epd::Sleep();
 */
void Epd::Reset(void) {
    DigitalWrite(reset_pin, HIGH);
    DelayMs(200);  
    DigitalWrite(reset_pin, LOW);                //module reset    
    DelayMs(5);
    DigitalWrite(reset_pin, HIGH); 
    DelayMs(200);  
}

/**
 *  @brief: put an image buffer to the frame memory.
 *          this won't update the display.
 */
void Epd::SetFrameMemory(
    const unsigned char* image_buffer,
    int x,
    int y,
    int image_width,
    int image_height
) {
    int x_end;
    int y_end;

    if (
        image_buffer == NULL ||
        x < 0 || image_width < 0 ||
        y < 0 || image_height < 0
    ) {
        return;
    }
    /* x point must be the multiple of 8 or the last 3 bits will be ignored */
    x &= 0xF8;
    image_width &= 0xF8;
    if (x + image_width >= this->width) {
        x_end = this->width - 1;
    } else {
        x_end = x + image_width - 1;
    }
    if (y + image_height >= this->height) {
        y_end = this->height - 1;
    } else {
        y_end = y + image_height - 1;
    }
    SetMemoryArea(x, y, x_end, y_end);
    SetMemoryPointer(x, y);
    SendCommand(0x24);
    /* send the image data */
    for (int j = 0; j < y_end - y + 1; j++) {
        for (int i = 0; i < (x_end - x + 1) / 8; i++) {
            SendData(image_buffer[i + j * (image_width / 8)]);
        }
    }
}
void Epd::SetFrameMemory_Partial(
    const unsigned char* image_buffer,
    int x,
    int y,
    int image_width,
    int image_height
) {
    int x_end;
    int y_end;

    if (
        image_buffer == NULL ||
        x < 0 || image_width < 0 ||
        y < 0 || image_height < 0
    ) {
        return;
    }
    /* x point must be the multiple of 8 or the last 3 bits will be ignored */
    x &= 0xF8;
    image_width &= 0xF8;
    if (x + image_width >= this->width) {
        x_end = this->width - 1;
    } else {
        x_end = x + image_width - 1;
    }
    if (y + image_height >= this->height) {
        y_end = this->height - 1;
    } else {
        y_end = y + image_height - 1;
    }

    DigitalWrite(reset_pin, LOW);
    DelayMs(5);
    DigitalWrite(reset_pin, HIGH);
    DelayMs(10);
	
	SetLut();
	SendCommand(0x37); 
	SendData(0x00);  
	SendData(0x00);  
	SendData(0x00);  
	SendData(0x00); 
	SendData(0x00);  	
	SendData(0x40);  
	SendData(0x00);  
	SendData(0x00);   
	SendData(0x00);  
	SendData(0x00);

	SendCommand(0x3C); //BorderWavefrom
	SendData(0x80);	

	SendCommand(0x22); 
	SendData(0xC0);   
	SendCommand(0x20); 
	WaitUntilIdle();  
	
    SetMemoryArea(x, y, x_end, y_end);
    SetMemoryPointer(x, y);
    SendCommand(0x24);
    /* send the image data */
    for (int j = 0; j < y_end - y + 1; j++) {
        for (int i = 0; i < (x_end - x + 1) / 8; i++) {
            SendData(image_buffer[i + j * (image_width / 8)]);
        }
    }
}

/**
 *  @brief: put an image buffer to the frame memory.
 *          this won't update the display.
 *
 *          Question: When do you use this function instead of 
 *          void SetFrameMemory(
 *              const unsigned char* image_buffer,
 *              int x,
 *              int y,
 *              int image_width,
 *              int image_height
 *          );
 *          Answer: SetFrameMemory with parameters only reads image data
 *          from the RAM but not from the flash in AVR chips (for AVR chips,
 *          you have to use the function pgm_read_byte to read buffers 
 *          from the flash).
 */
void Epd::SetFrameMemory(const unsigned char* image_buffer) {
    SetMemoryArea(0, 0, this->width - 1, this->height - 1);
    SetMemoryPointer(0, 0);
    SendCommand(0x24);
    /* send the image data */
    for (int i = 0; i < this->width / 8 * this->height; i++) {
        SendData(pgm_read_byte(&image_buffer[i]));
    }
}
void Epd::SetFrameMemory_Base(const unsigned char* image_buffer) {
    SetMemoryArea(0, 0, this->width - 1, this->height - 1);
    SetMemoryPointer(0, 0);
    SendCommand(0x24);
    /* send the image data */
    for (int i = 0; i < this->width / 8 * this->height; i++) {
        SendData(pgm_read_byte(&image_buffer[i]));
    }
    SendCommand(0x26);
    /* send the image data */
    for (int i = 0; i < this->width / 8 * this->height; i++) {
        SendData(pgm_read_byte(&image_buffer[i]));
    }
}

/**
 *  @brief: clear the frame memory with the specified color.
 *          this won't update the display.
 */
void Epd::ClearFrameMemory(unsigned char color) {
    SetMemoryArea(0, 0, this->width - 1, this->height - 1);
    SetMemoryPointer(0, 0);
    SendCommand(0x24);
    /* send the color data */
    for (int i = 0; i < this->width / 8 * this->height; i++) {
        SendData(color);
    }
}

/**
 *  @brief: update the display
 *          there are 2 memory areas embedded in the e-paper display
 *          but once this function is called,
 *          the the next action of SetFrameMemory or ClearFrame will 
 *          set the other memory area.
 */
void Epd::DisplayFrame(void) {
    SendCommand(0x22);
    SendData(0xF7);
    SendCommand(0x20);
    WaitUntilIdle();
}

void Epd::DisplayFrame_Partial(void) {
    SendCommand(0x22);
    SendData(0x0F);
    SendCommand(0x20);
    WaitUntilIdle();
}

void Epd::SetLut(void) {       
	unsigned char count;
	SendCommand(0x32);
	for(count=0; count<153; count++) 
		SendData(WF_PARTIAL_2IN9[count]); 
	WaitUntilIdle();
}

/**
 *  @brief: private function to specify the memory area for data R/W
 */
void Epd::SetMemoryArea(int x_start, int y_start, int x_end, int y_end) {
    SendCommand(0x44);
    /* x point must be the multiple of 8 or the last 3 bits will be ignored */
    SendData((x_start >> 3) & 0xFF);
    SendData((x_end >> 3) & 0xFF);
    SendCommand(0x45);
    SendData(y_start & 0xFF);
    SendData((y_start >> 8) & 0xFF);
    SendData(y_end & 0xFF);
    SendData((y_end >> 8) & 0xFF);
}

/**
 *  @brief: private function to specify the start point for data R/W
 */
void Epd::SetMemoryPointer(int x, int y) {
    SendCommand(0x4E);
    /* x point must be the multiple of 8 or the last 3 bits will be ignored */
    SendData((x >> 3) & 0xFF);
    SendCommand(0x4F);
    SendData(y & 0xFF);
    SendData((y >> 8) & 0xFF);
    WaitUntilIdle();
}

/**
 *  @brief: After this command is transmitted, the chip would enter the 
 *          deep-sleep mode to save power. 
 *          The deep sleep mode would return to standby by hardware reset. 
 *          You can use Epd::Init() to awaken
 */
void Epd::Sleep() {
    SendCommand(0x10);
    SendData(0x01);
    WaitUntilIdle();
}

/* END OF FILE */