2019.07.31

Arduino UNO/epd2in13d/epd2in13d.ino

@@ -45,7 +45,7 @@ void setup()
         return;
     }
     //Serial.print("ClearFrameMemory\n");
-   // epd.ClearFrameMemory();   // bit set = white, bit reset = black
+    // epd.ClearFrameMemory();   // bit set = white, bit reset = black
 
     /**
      *  there are 2 memory areas embedded in the e-paper display

Arduino UNO/epd2in13d/epdif.cpp

@@ -1,65 +0,0 @@
-/**
- *  @filename   :   epdif.cpp
- *  @brief      :   Implements EPD interface functions
- *                  Users have to implement all the functions in epdif.cpp
- *  @author     :   Yehui from Waveshare
- *
- *  Copyright (C) Waveshare     August 10 2017
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documnetation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to  whom the Software is
- * furished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "epdif.h"
-#include <spi.h>
-
-EpdIf::EpdIf() {
-};
-
-EpdIf::~EpdIf() {
-};
-
-void EpdIf::DigitalWrite(int pin, int value) {
-    digitalWrite(pin, value);
-}
-
-int EpdIf::DigitalRead(int pin) {
-    return digitalRead(pin);
-}
-
-void EpdIf::DelayMs(unsigned int delaytime) {
-    delay(delaytime);
-}
-
-void EpdIf::SpiTransfer(unsigned char data) {
-    digitalWrite(CS_PIN, LOW);
-    SPI.transfer(data);
-    digitalWrite(CS_PIN, HIGH);
-}
-
-int EpdIf::IfInit(void) {
-    pinMode(CS_PIN, OUTPUT);
-    pinMode(RST_PIN, OUTPUT);
-    pinMode(DC_PIN, OUTPUT);
-    pinMode(BUSY_PIN, INPUT);  
-    SPI.begin();
-    SPI.beginTransaction(SPISettings(2000000, MSBFIRST, SPI_MODE0));
-   
-    return 0;
-}
-

Arduino UNO/epd2in13d/epdif.h

@@ -1,51 +0,0 @@
-/**
- *  @filename   :   epdif.h
- *  @brief      :   Header file of epdif.cpp providing EPD interface functions
- *                  Users have to implement all the functions in epdif.cpp
- *  @author     :   Yehui from Waveshare
- *
- *  Copyright (C) Waveshare     August 10 2017
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documnetation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to  whom the Software is
- * furished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef EPDIF_H
-#define EPDIF_H
-
-#include <arduino.h>
-
-// Pin definition
-#define RST_PIN         8
-#define DC_PIN          9
-#define CS_PIN          10
-#define BUSY_PIN        7
-
-class EpdIf {
-public:
-    EpdIf(void);
-    ~EpdIf(void);
-
-    static int  IfInit(void);
-    static void DigitalWrite(int pin, int value); 
-    static int  DigitalRead(int pin);
-    static void DelayMs(unsigned int delaytime);
-    static void SpiTransfer(unsigned char data);
-};
-
-#endif

Arduino UNO/epd2in13d/fepd2in13.cpp

@@ -1,292 +0,0 @@
-/**
- *  @filename   :   epd2in13.cpp
- *  @brief      :   Implements for e-paper library
- *  @author     :   Yehui from Waveshare
- *
- *  Copyright (C) Waveshare     September 9 2017
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documnetation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to  whom the Software is
- * furished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <stdlib.h>
-#include "fepd2in13.h"
-
-/**
- * full screen update LUT
-**/
-const unsigned char lut_vcomDC[] = {
-    0x00, 0x08, 0x00, 0x00, 0x00, 0x02,
-    0x60, 0x28, 0x28, 0x00, 0x00, 0x01,
-    0x00, 0x14, 0x00, 0x00, 0x00, 0x01,
-    0x00, 0x12, 0x12, 0x00, 0x00, 0x01,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-};
-const unsigned char lut_ww[] = {
-    0x40, 0x08, 0x00, 0x00, 0x00, 0x02,
-    0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
-    0x40, 0x14, 0x00, 0x00, 0x00, 0x01,
-    0xA0, 0x12, 0x12, 0x00, 0x00, 0x01,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-const unsigned char lut_bw[] = {
-    0x40, 0x17, 0x00, 0x00, 0x00, 0x02,
-    0x90, 0x0F, 0x0F, 0x00, 0x00, 0x03,
-    0x40, 0x0A, 0x01, 0x00, 0x00, 0x01,
-    0xA0, 0x0E, 0x0E, 0x00, 0x00, 0x02,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-const unsigned char lut_wb[] = {
-    0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
-    0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
-    0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
-    0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-const unsigned char lut_bb[] = {
-    0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
-    0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
-    0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
-    0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-
-Epd::~Epd() {
-};
-
-Epd::Epd() {
-    reset_pin = RST_PIN;
-    dc_pin = DC_PIN;
-    cs_pin = CS_PIN;
-    busy_pin = BUSY_PIN;
-    width = EPD_WIDTH;
-    height = EPD_HEIGHT;
-};
-
-int Epd::Init() {
-    Serial.begin(9600);
-    /* this calls the peripheral hardware interface, see epdif */
-    if (IfInit() != 0) {
-        return -1;
-    }
-    /* EPD hardware init start */
-    Reset();
-    
-    SendCommand(0x01);	//POWER SETTING
-    SendData(0x03);
-    SendData(0x00);
-    SendData(0x2b);
-    SendData(0x2b);
-    SendData(0x03);
-
-    SendCommand(0x06);	//boost soft start
-    SendData(0x17);     //A
-    SendData(0x17);     //B
-    SendData(0x17);     //C
-
-    SendCommand(0x04);
-    // WaitUntilIdle();
-
-    SendCommand(0x00);	//panel setting
-    SendData(0xbf);     //LUT from OTP£¬128x296
-    SendData(0x0d);     //VCOM to 0V fast
-
-    SendCommand(0x30);	//PLL setting
-    SendData(0x3a);     // 3a 100HZ   29 150Hz 39 200HZ	31 171HZ
-
-    SendCommand(0x61);	//resolution setting
-    SendData(EPD_WIDTH);
-    SendData((EPD_HEIGHT >> 8) & 0xff);
-    SendData(EPD_HEIGHT& 0xff);
-
-    SendCommand(0x82);	//vcom_DC setting
-    SendData(0x28);
-    /* EPD hardware init end */
-    return 0;
-}
-
-/**
- *  @brief: basic function for sending commands
- */
-void Epd::SendCommand(unsigned char command) {
-    DigitalWrite(dc_pin, LOW);
-    SpiTransfer(command);
-}
-
-/**
- *  @brief: basic function for sending data
- */
-void Epd::SendData(unsigned char data) {
-    DigitalWrite(dc_pin, HIGH);
-    SpiTransfer(data);
-}
-
-/**
- *  @brief: Wait until the busy_pin goes LOW
- */
-void Epd::WaitUntilIdle(void) {
-    while(DigitalRead(busy_pin) == HIGH) {      //LOW: idle, HIGH: busy
-        DelayMs(100);
-    }
-}
-
-/**
- *  @brief: module reset.
- *          often used to awaken the module in deep sleep,
- *          see Epd::Sleep();
- */
-void Epd::Reset(void) {
-    DigitalWrite(reset_pin, LOW);                //module reset    
-    DelayMs(200);
-    DigitalWrite(reset_pin, HIGH);
-    DelayMs(200);    
-}
-
-/**
- *  @brief: set the look-up table register
- */
-void Epd::SetFullReg(void)
-{
-    SendCommand(0X50);  //VCOM AND DATA INTERVAL SETTING
-    SendData(0x97);		//WBmode:VBDF 17|D7 VBDW 97 VBDB 57		WBRmode:VBDF F7 VBDW 77 VBDB 37  VBDR B7
-
-    unsigned int count;
-    SendCommand(0x20);
-    for(count=0; count<44; count++) {
-        SendData(lut_vcomDC[count]);
-    }
-
-    SendCommand(0x21);
-    for(count=0; count<42; count++) {
-        SendData(lut_ww[count]);
-    }
-
-    SendCommand(0x22);
-    for(count=0; count<42; count++) {
-        SendData(lut_bw[count]);
-    }
-
-    SendCommand(0x23);
-    for(count=0; count<42; count++) {
-        SendData(lut_wb[count]);
-    }
-
-    SendCommand(0x24);
-    for(count=0; count<42; count++) {
-        SendData(lut_bb[count]);
-    }
-}
-
-void Epd::SetFrameMemory(const unsigned char* image_buffer) {
-    unsigned char Width, Height, data;
-    Width = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
-    Height = EPD_HEIGHT;
-    
-    SendCommand(0x10);
-    for (int j = 0; j < Height; j++) {
-        for (int i = 0; i < Width; i++) {
-            SendData(0x00);
-        }
-    }
-    DelayMs(10);
-
-    SendCommand(0x13);
-    for (int j = 0; j < Height; j++) {
-        for (int i = 0; i < Width; i++) {
-            data = pgm_read_byte(&image_buffer[i + j * Width]);
-            SendData(data);
-           // Serial.print(data);
-        }
-    }
-    DelayMs(10);
-
-    SetFullReg();
-    DisplayFrame();
-}
-
-/**
- *  @brief: clear the frame memory with the specified color.
- *          this won't update the display.
- */
-void Epd::ClearFrameMemory() {
-    unsigned char Width, Height;
-    Width = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
-    Height = EPD_HEIGHT;
-
-    SendCommand(0x10);
-    for (int j = 0; j < Height; j++) {
-        for (int i = 0; i < Width; i++) {
-            SendData(0x00);
-        }
-    }
-    DelayMs(10);
-
-    SendCommand(0x13);
-    for (int j = 0; j < Height; j++) {
-        for (int i = 0; i < Width; i++) {
-            SendData(0xFF);
-        }
-    }
-    DelayMs(10);
-
-    SetFullReg();
-    DisplayFrame();
-}
-
-/**
- *  @brief: update the display
- *          there are 2 memory areas embedded in the e-paper display
- *          but once this function is called,
- *          the the next action of SetFrameMemory or ClearFrame will 
- *          set the other memory area.
- */
-void Epd::DisplayFrame(void) {
-    SendCommand(0x12);
-    DelayMs(100);
-    WaitUntilIdle();
-}
-
-/**
- *  @brief: After this command is transmitted, the chip would enter the 
- *          deep-sleep mode to save power. 
- *          The deep sleep mode would return to standby by hardware reset. 
- *          You can use Epd::Init() to awaken
- */
-void Epd::Sleep() {
-    SendCommand(0X50);
-    SendData(0xf7);
-    SendCommand(0X02);  	//power off
-    SendCommand(0X07);  	//deep sleep
-    SendData(0xA5);
-}
-
-
-/* END OF FILE */
-
-

Arduino UNO/epd2in13d/fepd2in13.h

@@ -1,67 +0,0 @@
-/**
- *  @filename   :   epd2in13.h
- *  @brief      :   Header file for e-paper display library epd2in13.cpp
- *  @author     :   Yehui from Waveshare
- *  
- *  Copyright (C) Waveshare     September 9 2017
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documnetation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to  whom the Software is
- * furished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef FEPD2IN13_H
-#define FEPD2IN13_H
-
-#include "epdif.h"
-
-// Display resolution
-/* the resolution is 122x250 in fact */
-/* however, the logical resolution is 128x250 */
-#define EPD_WIDTH       104
-#define EPD_HEIGHT      212
-
-class Epd : EpdIf {
-public:
-    unsigned long width;
-    unsigned long height;
-
-    Epd();
-    ~Epd();
-    int  Init();
-    void SendCommand(unsigned char command);
-    void SendData(unsigned char data);
-    void WaitUntilIdle(void);
-    void Reset(void);
-    void SetFrameMemory(const unsigned char* image_buffer);
-    void ClearFrameMemory();
-    void DisplayFrame(void);
-    void Sleep(void);
-
-private:
-    unsigned int reset_pin;
-    unsigned int dc_pin;
-    unsigned int cs_pin;
-    unsigned int busy_pin;
-    const unsigned char* lut;
-
-    void SetFullReg(void);
-};
-
-#endif /* EPD2IN13_H */
-
-/* END OF FILE */

Jetson Nano/c/Makefile

@@ -1,42 +0,0 @@
-DIR_Config   = ./lib/Config
-DIR_EPD      = ./lib/e-Paper
-DIR_FONTS    = ./lib/Fonts
-DIR_GUI      = ./lib/GUI
-DIR_Examples = ./examples
-DIR_BIN      = ./bin
-
-OBJ_C = $(wildcard ${DIR_EPD}/*.c ${DIR_Config}/*.c ${DIR_GUI}/*.c ${DIR_Examples}/*.c ${DIR_FONTS}/*.c)
-OBJ_O = $(patsubst %.c,${DIR_BIN}/%.o,$(notdir ${OBJ_C}))
-
-TARGET = epd
-
-CC = gcc
-
-MSG = -g -O0 -Wall
-DEBUG = -D DEBUG
-# DEBUG = 
-CFLAGS += $(MSG) $(DEBUG)
-
-LIB = -I $(shell pwd)
-
-${TARGET}:${OBJ_O}
-	$(CC) $(CFLAGS) $(OBJ_O) -o $@
-    
-${DIR_BIN}/%.o:$(DIR_Examples)/%.c
-	$(CC) $(CFLAGS) -c  $< -o $@ -I $(DIR_Config) -I $(DIR_GUI) -I $(DIR_EPD)
-    
-${DIR_BIN}/%.o:$(DIR_Config)/%.c
-	$(CC) $(CFLAGS) -c  $< -o $@
-    
-${DIR_BIN}/%.o:$(DIR_EPD)/%.c
-	$(CC) $(CFLAGS) -c  $< -o $@ -I $(DIR_Config)
-    
-${DIR_BIN}/%.o:$(DIR_FONTS)/%.c
-	$(CC) $(CFLAGS) -c  $< -o $@
-    
-${DIR_BIN}/%.o:$(DIR_GUI)/%.c
-	$(CC) $(CFLAGS) -c  $< -o $@ -I $(DIR_Config)
-	
-clean :
-	rm $(DIR_BIN)/*.* 
-	rm $(TARGET) 

Jetson Nano/c/examples/EPD_1in54_test.c

@@ -1,163 +0,0 @@
-/*****************************************************************************
-* | File      	:   EPD_1IN54_test.c
-* | Author      :   Waveshare team
-* | Function    :   1.54inch e-paper test demo
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-11
-* | Info        :
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "EPD_Test.h"
-#include "EPD_1in54.h"
-
-int EPD_1in54_test(void)
-{
-    printf("EPD_1IN54_test Demo\r\n");
-    DEV_Module_Init();
-
-    printf("e-Paper Init and Clear...\r\n");
-    EPD_1IN54_Init(EPD_1IN54_FULL);
-    EPD_1IN54_Clear();
-    DEV_Delay_ms(500);
-
-    //Create a new image cache
-    UBYTE *BlackImage;
-    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
-    UWORD Imagesize = ((EPD_1IN54_WIDTH % 8 == 0)? (EPD_1IN54_WIDTH / 8 ): (EPD_1IN54_WIDTH / 8 + 1)) * EPD_1IN54_HEIGHT;
-    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
-        printf("Failed to apply for black memory...\r\n");
-        return -1;
-    }
-    printf("Paint_NewImage\r\n");
-    Paint_NewImage(BlackImage, EPD_1IN54_WIDTH, EPD_1IN54_HEIGHT, 270, WHITE);
-
-#if 1   // show bmp    
-    printf("show window BMP-----------------\r\n");
-    Paint_SelectImage(BlackImage);
-    
-    Paint_Clear(WHITE);
-    GUI_ReadBmp("./pic/100x100.bmp", 50, 50);
-    EPD_1IN54_Display(BlackImage);
-    DEV_Delay_ms(500);
-
-    printf("show bmp------------------------\r\n");
-    Paint_Clear(WHITE);    
-    GUI_ReadBmp("./pic/1in54.bmp", 0, 0);
-    EPD_1IN54_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif
-    
-#if 1   //show image for array    
-    printf("show image for array\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    Paint_DrawBitMap(gImage_1in54);
-
-    EPD_1IN54_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif
-
-#if 1   // Drawing on the image
-    printf("Drawing\r\n");
-    //1.Select Image
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-
-    // 2.Drawing on the image
-    Paint_DrawPoint(5, 10, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
-    Paint_DrawPoint(5, 25, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
-    Paint_DrawPoint(5, 40, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
-    Paint_DrawPoint(5, 55, BLACK, DOT_PIXEL_4X4, DOT_STYLE_DFT);
-
-    Paint_DrawLine(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawLine(70, 10, 20, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawLine(170, 15, 170, 55, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawLine(150, 35, 190, 35, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-
-    Paint_DrawRectangle(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawRectangle(85, 10, 130, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-
-    Paint_DrawCircle(170, 35, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawCircle(170, 85, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawString_EN(5, 85, "waveshare", &Font20, BLACK, WHITE);
-    Paint_DrawNum(5, 110, 123456789, &Font20, BLACK, WHITE);
-
-    Paint_DrawString_CN(5, 135,"ÄãºÃabc", &Font12CN, BLACK, WHITE);
-    Paint_DrawString_CN(5, 155, "΢ѩµç×Ó", &Font24CN, WHITE, BLACK);
-
-    EPD_1IN54_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif
-
-#if 1   //Partial refresh, example shows time    		
-    printf("Partial refresh\r\n");
-    EPD_1IN54_Init(EPD_1IN54_PART);
-    Paint_SelectImage(BlackImage);
-    PAINT_TIME sPaint_time;
-    sPaint_time.Hour = 12;
-    sPaint_time.Min = 34;
-    sPaint_time.Sec = 56;
-    UBYTE num = 20;
-    for (;;) {
-        sPaint_time.Sec = sPaint_time.Sec + 1;
-        if (sPaint_time.Sec == 60) {
-            sPaint_time.Min = sPaint_time.Min + 1;
-            sPaint_time.Sec = 0;
-            if (sPaint_time.Min == 60) {
-                sPaint_time.Hour =  sPaint_time.Hour + 1;
-                sPaint_time.Min = 0;
-                if (sPaint_time.Hour == 24) {
-                    sPaint_time.Hour = 0;
-                    sPaint_time.Min = 0;
-                    sPaint_time.Sec = 0;
-                }
-            }
-        }
-        Paint_ClearWindows(15, 65, 15 + Font20.Width * 7, 65 + Font20.Height, WHITE);
-        Paint_DrawTime(15, 65, &sPaint_time, &Font20, WHITE, BLACK);
-        num = num - 1;
-        if(num == 0) {
-            break;
-        }
-        EPD_1IN54_Display(BlackImage);
-        // DEV_Delay_ms(100);//Analog clock 1s
-    }
-
-#endif
-
-    printf("Clear...\r\n");
-    EPD_1IN54_Init(EPD_1IN54_FULL);
-    EPD_1IN54_Clear();
-
-    printf("Goto Sleep...\r\n");
-    EPD_1IN54_Sleep();
-    free(BlackImage);
-    BlackImage = NULL;
-
-    // close 5V
-    printf("close 5V, Module enters 0 power consumption ...\r\n");
-    DEV_Module_Exit();
-    
-    return 0;
-}
-

Jetson Nano/c/examples/EPD_2in13_V2_test.c

@@ -1,172 +0,0 @@
-/*****************************************************************************
-* | File      	:   EPD_2IN13_V2_test.c
-* | Author      :   Waveshare team
-* | Function    :   2.13inch e-paper(V2) test demo
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-13
-* | Info        :
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "EPD_Test.h"
-#include "EPD_2in13_V2.h"
-
-int EPD_2in13_V2_test(void)
-{
-    printf("EPD_2IN13_V2_test Demo\r\n");
-    DEV_Module_Init();
-
-    printf("e-Paper Init and Clear...\r\n");
-    EPD_2IN13_V2_Init(EPD_2IN13_V2_FULL);
-    EPD_2IN13_V2_Clear();
-    DEV_Delay_ms(500);
-
-    //Create a new image cache
-    UBYTE *BlackImage;
-    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
-    UWORD Imagesize = ((EPD_2IN13_V2_WIDTH % 8 == 0)? (EPD_2IN13_V2_WIDTH / 8 ): (EPD_2IN13_V2_WIDTH / 8 + 1)) * EPD_2IN13_V2_HEIGHT;
-    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
-        printf("Failed to apply for black memory...\r\n");
-        return -1;
-    }
-    printf("Paint_NewImage\r\n");
-    Paint_NewImage(BlackImage, EPD_2IN13_V2_WIDTH, EPD_2IN13_V2_HEIGHT, 270, WHITE);
-    Paint_SelectImage(BlackImage);
-    Paint_SetMirroring(MIRROR_HORIZONTAL); //
-    Paint_Clear(WHITE);
-
-#if 1   // show bmp
-    printf("show window BMP-----------------\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    GUI_ReadBmp("./pic/100x100.bmp", 10, 10);
-    EPD_2IN13_V2_Display(BlackImage);
-    DEV_Delay_ms(2000);
-
-    printf("show bmp------------------------\r\n");
-    Paint_SelectImage(BlackImage);
-    GUI_ReadBmp("./pic/2in13-v2.bmp", 0, 0);
-    EPD_2IN13_V2_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif    
-    
-
-#if 1   //show image for array    
-    printf("show image for array\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    Paint_DrawBitMap(gImage_2in13);
-
-    EPD_2IN13_V2_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif
-
-#if 1   // Drawing on the image
-    printf("Drawing\r\n");
-    //1.Select Image
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-
-    // 2.Drawing on the image
-    Paint_DrawPoint(5, 10, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
-    Paint_DrawPoint(5, 25, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
-    Paint_DrawPoint(5, 40, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
-    Paint_DrawPoint(5, 55, BLACK, DOT_PIXEL_4X4, DOT_STYLE_DFT);
-
-    Paint_DrawLine(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawLine(70, 10, 20, 60, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawRectangle(20, 10, 70, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawRectangle(85, 10, 135, 60, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-
-    Paint_DrawLine(45, 15, 45, 55, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawLine(25, 35, 70, 35, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawCircle(45, 35, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawCircle(110, 35, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-
-    Paint_DrawString_EN(140, 15, "waveshare", &Font16, BLACK, WHITE);
-    Paint_DrawNum(140, 40, 123456789, &Font16, BLACK, WHITE);
-
-    Paint_DrawString_CN(140, 60, "ÄãºÃabc", &Font12CN, BLACK, WHITE);
-    Paint_DrawString_CN(5, 65, "΢ѩµç×Ó", &Font24CN, WHITE, BLACK);
-
-    EPD_2IN13_V2_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif
-
-#if 1   //Partial refresh, example shows time    		
-    printf("Partial refresh\r\n");
-    EPD_2IN13_V2_Init(EPD_2IN13_V2_FULL);
-    EPD_2IN13_V2_DisplayPartBaseImage(BlackImage);
-
-    EPD_2IN13_V2_Init(EPD_2IN13_V2_PART);
-    Paint_SelectImage(BlackImage);
-    PAINT_TIME sPaint_time;
-    sPaint_time.Hour = 12;
-    sPaint_time.Min = 34;
-    sPaint_time.Sec = 56;
-    UBYTE num = 20;
-    for (;;) {
-        sPaint_time.Sec = sPaint_time.Sec + 1;
-        if (sPaint_time.Sec == 60) {
-            sPaint_time.Min = sPaint_time.Min + 1;
-            sPaint_time.Sec = 0;
-            if (sPaint_time.Min == 60) {
-                sPaint_time.Hour =  sPaint_time.Hour + 1;
-                sPaint_time.Min = 0;
-                if (sPaint_time.Hour == 24) {
-                    sPaint_time.Hour = 0;
-                    sPaint_time.Min = 0;
-                    sPaint_time.Sec = 0;
-                }
-            }
-        }
-        Paint_ClearWindows(140, 90, 140 + Font20.Width * 7, 90 + Font20.Height, WHITE);
-        Paint_DrawTime(140, 90, &sPaint_time, &Font20, WHITE, BLACK);
-
-        num = num - 1;
-        if(num == 0) {
-            break;
-        }
-        EPD_2IN13_V2_DisplayPart(BlackImage);
-        DEV_Delay_ms(500);//Analog clock 1s
-    }
-
-#endif
-    printf("Clear...\r\n");
-
-    EPD_2IN13_V2_Init(EPD_2IN13_V2_FULL);
-    EPD_2IN13_V2_Clear();
-    DEV_Delay_ms(2000);//Analog clock 1s
-
-    printf("Goto Sleep...\r\n");
-    EPD_2IN13_V2_Sleep();
-    free(BlackImage);
-    BlackImage = NULL;
-    DEV_Delay_ms(1000);//Analog clock 1s
-
-    // close 5V
-    printf("close 5V, Module enters 0 power consumption ...\r\n");
-    DEV_Module_Exit();
-    
-    return 0;
-}
-

Jetson Nano/c/examples/EPD_4in2_test.c

@@ -1,123 +0,0 @@
-/*****************************************************************************
-* | File      	:   EPD_4in2_test.c
-* | Author      :   Waveshare team
-* | Function    :   4.2inch e-paper test demo
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-13
-* | Info        :
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "EPD_Test.h"
-#include "EPD_4in2.h"
-
-int EPD_4in2_test(void)
-{
-    printf("EPD_4IN2_test Demo\r\n");
-    DEV_Module_Init();
-
-    printf("e-Paper Init and Clear...\r\n");
-    EPD_4IN2_Init();
-    EPD_4IN2_Clear();
-    DEV_Delay_ms(500);
-
-    //Create a new image cache
-    UBYTE *BlackImage;
-    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
-    UWORD Imagesize = ((EPD_4IN2_WIDTH % 8 == 0)? (EPD_4IN2_WIDTH / 8 ): (EPD_4IN2_WIDTH / 8 + 1)) * EPD_4IN2_HEIGHT;
-    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
-        printf("Failed to apply for black memory...\r\n");
-        return -1;
-    }
-    printf("Paint_NewImage\r\n");
-    Paint_NewImage(BlackImage, EPD_4IN2_WIDTH, EPD_4IN2_HEIGHT, 180, WHITE);
-
-#if 1   // show bmp
-    printf("show window BMP-----------------\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    GUI_ReadBmp("./pic/100x100.bmp", 10, 10);
-    EPD_4IN2_Display(BlackImage);
-    DEV_Delay_ms(2000);
-
-    printf("show bmp------------------------\r\n");
-    Paint_SelectImage(BlackImage);
-    GUI_ReadBmp("./pic/4in2.bmp", 0, 0);
-    EPD_4IN2_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif        
-
-#if 1   // show image for array   
-    printf("show image for array\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    Paint_DrawBitMap(gImage_4in2);
-    EPD_4IN2_Display(BlackImage);
-    DEV_Delay_ms(500);
-#endif
-
-#if 1   // Drawing on the image
-    //1.Select Image
-    printf("SelectImage:BlackImage\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-
-    // 2.Drawing on the image
-    printf("Drawing:BlackImage\r\n");
-    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
-    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
-    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
-    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
-    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
-    Paint_DrawString_CN(130, 0, " ÄãºÃabc", &Font12CN, BLACK, WHITE);
-    Paint_DrawString_CN(130, 20, "΢ѩµç×Ó", &Font24CN, WHITE, BLACK);
-
-    printf("EPD_Display\r\n");
-    EPD_4IN2_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif
-
-    printf("Clear...\r\n");
-    EPD_4IN2_Clear();
-
-    printf("Goto Sleep...\r\n");
-    EPD_4IN2_Sleep();
-    free(BlackImage);
-    BlackImage = NULL;
-
-    // close 5V
-    printf("close 5V, Module enters 0 power consumption ...\r\n");
-    DEV_Module_Exit();
-    
-    return 0;
-}
-

Jetson Nano/c/examples/EPD_5in83_test.c

@@ -1,123 +0,0 @@
-/*****************************************************************************
-* | File      	:   EPD_5in83_test.c
-* | Author      :   Waveshare team
-* | Function    :   5.83inch e-paper test demo
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-13
-* | Info        :
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "EPD_Test.h"
-#include "EPD_5in83.h"
-
-int EPD_5in83_test(void)
-{
-    printf("EPD_5IN83_test Demo\r\n");
-    DEV_Module_Init();
-
-    printf("e-Paper Init and Clear...\r\n");
-    EPD_5IN83_Init();
-    EPD_5IN83_Clear();
-    DEV_Delay_ms(500);
-
-    //Create a new image cache
-    UBYTE *BlackImage;
-    /* you have to edit the startup_stm32fxxx.s file and set a big enough heap size */
-    UWORD Imagesize = ((EPD_5IN83_WIDTH % 8 == 0)? (EPD_5IN83_WIDTH / 8 ): (EPD_5IN83_WIDTH / 8 + 1)) * EPD_5IN83_HEIGHT;
-    if((BlackImage = (UBYTE *)malloc(Imagesize)) == NULL) {
-        printf("Failed to apply for black memory...\r\n");
-        return -1;
-    }
-    printf("Paint_NewImage\r\n");
-    Paint_NewImage(BlackImage, EPD_5IN83_WIDTH, EPD_5IN83_HEIGHT, 180, WHITE);
-
-#if 1   // show bmp
-    printf("show window BMP-----------------\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    GUI_ReadBmp("./pic/100x100.bmp", 10, 10);
-    EPD_5IN83_Display(BlackImage);
-    DEV_Delay_ms(2000);
-
-    printf("show bmp------------------------\r\n");
-    Paint_SelectImage(BlackImage);
-    GUI_ReadBmp("./pic/5in83.bmp", 0, 0);
-    EPD_5IN83_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif        
-
-#if 0   // show image for array   
-    printf("show image for array\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    Paint_DrawBitMap(gImage_5in83);
-    EPD_5IN83_Display(BlackImage);
-    DEV_Delay_ms(500);
-#endif
-
-#if 0   // Drawing on the image
-    //1.Select Image
-    printf("SelectImage:BlackImage\r\n");
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-
-    // 2.Drawing on the image
-    printf("Drawing:BlackImage\r\n");
-    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
-    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawCircle(45, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawCircle(105, 95, 20, WHITE, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);
-    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
-    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
-    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
-    Paint_DrawString_CN(130, 0, " ÄãºÃabc", &Font12CN, BLACK, WHITE);
-    Paint_DrawString_CN(130, 20, "΢ѩµç×Ó", &Font24CN, WHITE, BLACK);
-
-    printf("EPD_Display\r\n");
-    EPD_5IN83_Display(BlackImage);
-    DEV_Delay_ms(2000);
-#endif
-
-    printf("Clear...\r\n");
-    EPD_5IN83_Clear();
-
-    printf("Goto Sleep...\r\n");
-    EPD_5IN83_Sleep();
-    free(BlackImage);
-    BlackImage = NULL;
-
-    // close 5V
-    printf("close 5V, Module enters 0 power consumption ...\r\n");
-    DEV_Module_Exit();
-    
-    return 0;
-}
-

Jetson Nano/c/examples/EPD_5in83bc_test.c

@@ -1,136 +0,0 @@
-/*****************************************************************************
-* | File      	:   EPD_5in83bc_test.c
-* | Author      :   Waveshare team
-* | Function    :   5.83inch B&C e-paper test demo
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-13
-* | Info        :
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "EPD_Test.h"
-#include "EPD_5in83bc.h"
-
-int EPD_5in83bc_test(void)
-{
-    printf("EPD_5IN83BC_test Demo\r\n");
-    DEV_Module_Init();
-
-    printf("e-Paper Init and Clear...\r\n");
-    EPD_5IN83BC_Init();
-    EPD_5IN83BC_Clear();
-    DEV_Delay_ms(500);
-
-    //Create a new image cache named IMAGE_BW and fill it with white
-    UBYTE *BlackImage, *RYImage;
-    UWORD Imagesize = ((EPD_5IN83BC_WIDTH % 8 == 0)? (EPD_5IN83BC_WIDTH / 8 ): (EPD_5IN83BC_WIDTH / 8 + 1)) * EPD_5IN83BC_HEIGHT;
-    if((BlackImage = (UBYTE *)malloc(Imagesize / 2)) == NULL) {
-        printf("Failed to apply for black memory...\r\n");
-        return -1;
-    }
-    if((RYImage = (UBYTE *)malloc(Imagesize / 2)) == NULL) {
-        printf("Failed to apply for red memory...\r\n");
-        return -1;
-    }
-    printf("NewImage:BlackImage and RYImage\r\n");
-    Paint_NewImage(BlackImage, EPD_5IN83BC_WIDTH, EPD_5IN83BC_HEIGHT / 2, 0, WHITE);
-    Paint_NewImage(RYImage, EPD_5IN83BC_WIDTH, EPD_5IN83BC_HEIGHT / 2, 0, WHITE);
-
-    //Select Image
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    Paint_SelectImage(RYImage);
-    Paint_Clear(WHITE);
-
-#if 1   // show bmp
-    printf("show window BMP-----------------\r\n");
-    Paint_SelectImage(BlackImage);
-    GUI_ReadBmp("./pic/100x100.bmp", 10, 0);
-    Paint_SelectImage(RYImage);
-    Paint_Clear(WHITE);    
-    EPD_5IN83BC_Display(BlackImage, RYImage);
-    DEV_Delay_ms(2000);
-
-    printf("show red bmp------------------------\r\n");
-    Paint_SelectImage(BlackImage);
-    GUI_ReadBmp("./pic/5in83bc-b.bmp", 0, 0);
-    Paint_SelectImage(RYImage);
-    GUI_ReadBmp("./pic/5in83bc-ry.bmp", 0, 0);
-    EPD_5IN83BC_Display(BlackImage, RYImage);
-#endif    
-    
-#if 1   // show image for array    
-    printf("show image for array\r\n");
-    EPD_5IN83BC_Display(gImage_5in83bc_b, gImage_5in83bc_ry);
-    DEV_Delay_ms(2000);
-#endif
-
-#if 1   // Drawing on the image
-    /*Horizontal screen*/
-    //1.Draw black image
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
-    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);      
-    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);    
-    Paint_DrawString_CN(130, 20, "΢ѩµç×Ó", &Font24CN, WHITE, BLACK);
-    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
-    
-    //2.Draw red image
-    Paint_SelectImage(RYImage);
-    Paint_Clear(WHITE);
-    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawLine(105, 75,+ 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);  
-    Paint_DrawString_CN(130, 0,"ÄãºÃabc", &Font12CN, BLACK, WHITE);
-    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
-    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
-    
-    printf("EPD_Display\r\n");
-    EPD_5IN83BC_DisplayHalfScreen(BlackImage, RYImage);
-    DEV_Delay_ms(2000);
-#endif
-
-    printf("Clear...\r\n");
-    EPD_5IN83BC_Clear();
-
-    printf("Goto Sleep...\r\n");
-    EPD_5IN83BC_Sleep();
-    free(BlackImage);
-    free(RYImage);
-    BlackImage = NULL;
-    RYImage = NULL;
-
-    // close 5V
-    printf("close 5V, Module enters 0 power consumption ...\r\n");
-    DEV_Module_Exit();
-    
-    return 0;
-}
-

Jetson Nano/c/examples/EPD_7in5bc_test.c

@@ -1,136 +0,0 @@
-/*****************************************************************************
-* | File      	:   EPD_7in5bc_test.c
-* | Author      :   Waveshare team
-* | Function    :   5.83inch B&C e-paper test demo
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-13
-* | Info        :
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "EPD_Test.h"
-#include "EPD_7in5bc.h"
-
-int EPD_7in5bc_test(void)
-{
-    printf("EPD_7IN5BC_test Demo\r\n");
-    DEV_Module_Init();
-
-    printf("e-Paper Init and Clear...\r\n");
-    EPD_7IN5BC_Init();
-    EPD_7IN5BC_Clear();
-    DEV_Delay_ms(500);
-
-    //Create a new image cache named IMAGE_BW and fill it with white
-    UBYTE *BlackImage, *RYImage;
-    UWORD Imagesize = ((EPD_7IN5BC_WIDTH % 8 == 0)? (EPD_7IN5BC_WIDTH / 8 ): (EPD_7IN5BC_WIDTH / 8 + 1)) * EPD_7IN5BC_HEIGHT;
-    if((BlackImage = (UBYTE *)malloc(Imagesize / 2)) == NULL) {
-        printf("Failed to apply for black memory...\r\n");
-        return -1;
-    }
-    if((RYImage = (UBYTE *)malloc(Imagesize / 2)) == NULL) {
-        printf("Failed to apply for red memory...\r\n");
-        return -1;
-    }
-    printf("NewImage:BlackImage and RYImage\r\n");
-    Paint_NewImage(BlackImage, EPD_7IN5BC_WIDTH, EPD_7IN5BC_HEIGHT / 2, 0, WHITE);
-    Paint_NewImage(RYImage, EPD_7IN5BC_WIDTH, EPD_7IN5BC_HEIGHT / 2, 0, WHITE);
-
-    //Select Image
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    Paint_SelectImage(RYImage);
-    Paint_Clear(WHITE);
-
-#if 1   // show bmp
-    printf("show window BMP-----------------\r\n");
-    Paint_SelectImage(BlackImage);
-    GUI_ReadBmp("./pic/100x100.bmp", 10, 0);
-    Paint_SelectImage(RYImage);
-    Paint_Clear(WHITE);    
-    EPD_7IN5BC_Display(BlackImage, RYImage);
-    DEV_Delay_ms(2000);
-
-    printf("show red bmp------------------------\r\n");
-    Paint_SelectImage(BlackImage);
-    GUI_ReadBmp("./pic/7in5b-b.bmp", 0, 0);
-    Paint_SelectImage(RYImage);
-    GUI_ReadBmp("./pic/7in5b-r.bmp", 0, 0);
-    EPD_7IN5BC_Display(BlackImage, RYImage);
-#endif    
-    
-#if 1   // show image for array    
-    printf("show image for array\r\n");
-    EPD_7IN5BC_Display(gImage_7in5bc_b, gImage_7in5bc_ry);
-    DEV_Delay_ms(2000);
-#endif
-
-#if 1   // Drawing on the image
-    /*Horizontal screen*/
-    //1.Draw black image
-    Paint_SelectImage(BlackImage);
-    Paint_Clear(WHITE);
-    Paint_DrawPoint(10, 80, BLACK, DOT_PIXEL_1X1, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 90, BLACK, DOT_PIXEL_2X2, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 100, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
-    Paint_DrawPoint(10, 110, BLACK, DOT_PIXEL_3X3, DOT_STYLE_DFT);
-    Paint_DrawLine(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);
-    Paint_DrawLine(70, 70, 20, 120, BLACK, DOT_PIXEL_1X1, LINE_STYLE_SOLID);      
-    Paint_DrawRectangle(20, 70, 70, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawRectangle(80, 70, 130, 120, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawString_EN(10, 0, "waveshare", &Font16, BLACK, WHITE);    
-    Paint_DrawString_CN(130, 20, "΢ѩµç×Ó", &Font24CN, WHITE, BLACK);
-    Paint_DrawNum(10, 50, 987654321, &Font16, WHITE, BLACK);
-    
-    //2.Draw red image
-    Paint_SelectImage(RYImage);
-    Paint_Clear(WHITE);
-    Paint_DrawCircle(160, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_EMPTY);
-    Paint_DrawCircle(210, 95, 20, BLACK, DOT_PIXEL_1X1, DRAW_FILL_FULL);
-    Paint_DrawLine(85, 95, 125, 95, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);
-    Paint_DrawLine(105, 75, 105, 115, BLACK, DOT_PIXEL_1X1, LINE_STYLE_DOTTED);  
-    Paint_DrawString_CN(130, 0,"ÄãºÃabc", &Font12CN, BLACK, WHITE);
-    Paint_DrawString_EN(10, 20, "hello world", &Font12, WHITE, BLACK);
-    Paint_DrawNum(10, 33, 123456789, &Font12, BLACK, WHITE);
-    
-    printf("EPD_Display\r\n");
-    EPD_7IN5BC_DisplayHalfScreen(BlackImage, RYImage);
-    DEV_Delay_ms(2000);
-#endif
-
-    printf("Clear...\r\n");
-    EPD_7IN5BC_Clear();
-
-    printf("Goto Sleep...\r\n");
-    EPD_7IN5BC_Sleep();
-    free(BlackImage);
-    free(RYImage);
-    BlackImage = NULL;
-    RYImage = NULL;
-
-    // close 5V
-    printf("close 5V, Module enters 0 power consumption ...\r\n");
-    DEV_Module_Exit();
-    
-    return 0;
-}
-

Jetson Nano/c/lib/Config/DEV_Config.c

@@ -1,99 +0,0 @@
-/*****************************************************************************
-* | File      	:   DEV_Config.c
-* | Author      :   Waveshare team
-* | Function    :   Hardware underlying interface
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-05
-* | Info        :
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "DEV_Config.h"
-
-/******************************************************************************
-function:	Initialization pin
-parameter:
-Info:
-******************************************************************************/
-static void DEV_GPIOConfig(void)
-{
-    SYSFS_GPIO_Export(EPD_CS_PIN);
-    SYSFS_GPIO_Export(EPD_DC_PIN);
-    SYSFS_GPIO_Export(EPD_RST_PIN);
-    SYSFS_GPIO_Export(EPD_BUSY_PIN);
-
-    SYSFS_GPIO_Direction(EPD_CS_PIN, OUT);
-    SYSFS_GPIO_Direction(EPD_DC_PIN, OUT);
-    SYSFS_GPIO_Direction(EPD_RST_PIN, OUT);
-    SYSFS_GPIO_Direction(EPD_BUSY_PIN, IN);
-}
-
-void DEV_Delay_us(UWORD xus)
-{
-    for(int j=xus; j > 0; j--);
-}
-
-void DEV_Delay_ms(UWORD xms)
-{
-    for(int j=xms; j > 0; j--)
-        for(int j=xms; j > 0; j--);
-}
-
-/******************************************************************************
-function:	Module Initialize, the BCM2835 library and initialize the pins, SPI protocol
-parameter:
-Info:
-******************************************************************************/
-UBYTE DEV_Module_Init(void)
-{
-    DEV_GPIOConfig();
-    
-    SYSFS_software_spi_begin();
-    SYSFS_software_spi_setBitOrder(SOFTWARE_SPI_MSBFIRST);
-    SYSFS_software_spi_setDataMode(SOFTWARE_SPI_Mode0);
-    SYSFS_software_spi_setClockDivider(SOFTWARE_SPI_CLOCK_DIV4);
-    return 0;
-}
-
-void DEV_SPI_WriteByte(UBYTE value)
-{
-    SYSFS_software_spi_transfer(value);
-}
-
-/******************************************************************************
-function:	Module exits, closes SPI and BCM2835 library
-parameter:
-Info:
-******************************************************************************/
-void DEV_Module_Exit(void)
-{
-    SYSFS_software_spi_end(); 
-    
-    SYSFS_GPIO_Write(EPD_CS_PIN, LOW);
-    SYSFS_GPIO_Write(EPD_DC_PIN, LOW);
-    SYSFS_GPIO_Write(EPD_RST_PIN, LOW);
-
-    SYSFS_GPIO_Unexport(EPD_CS_PIN);
-    SYSFS_GPIO_Unexport(EPD_DC_PIN);
-    SYSFS_GPIO_Unexport(EPD_RST_PIN);
-    SYSFS_GPIO_Unexport(EPD_BUSY_PIN);
-}

Jetson Nano/c/lib/Config/DEV_Config.h

@@ -1,69 +0,0 @@
-/*****************************************************************************
-* | File      	:   DEV_Config.h
-* | Author      :   Waveshare team
-* | Function    :   Hardware underlying interface
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-04
-* | Info        :
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#ifndef _DEV_CONFIG_H_
-#define _DEV_CONFIG_H_
-
-#include "sysfs_gpio.h"
-#include "sysfs_software_spi.h"
-#include <stdint.h>
-#include <stdio.h>
-
-/**
- * data
-**/
-#define UBYTE   uint8_t
-#define UWORD   uint16_t
-#define UDOUBLE uint32_t
-
-/**
- * GPIO config
-**/
-// #define EPD_MOSI_PIN    SPI0_MOSI
-// #define EPD_SCK_PIN     SPI0_SCK
-#define EPD_CS_PIN      SPI0_CS0
-#define EPD_DC_PIN      GPIO25
-#define EPD_RST_PIN     GPIO17
-#define EPD_BUSY_PIN    GPIO24
-
-/**
- * GPIO read and write
-**/
-#define DEV_Digital_Write(_pin, _value) SYSFS_GPIO_Write(_pin, _value)
-#define DEV_Digital_Read(_pin) SYSFS_GPIO_Read(_pin)
-
-/*------------------------------------------------------------------------------------------------------*/
-UBYTE DEV_Module_Init(void);
-void DEV_Module_Exit(void);
-void DEV_Delay_us(UWORD xus);
-void DEV_Delay_ms(UWORD xms);
-void DEV_SPI_WriteByte(UBYTE value);
-
-
-#endif

Jetson Nano/c/lib/Fonts/font24CN.c

@@ -1,465 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Font12.c
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    18-February-2014
-  * @brief   This file provides text Font12 for STM32xx-EVAL's LCD driver. 
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "fonts.h"
-
-
-// 
-//  Font data for Courier New 12pt
-// 
-
-const CH_CN Font24CN_Table[] = 
-{
-/*--  文字:  你  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"你",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xC1,0xC0,0x00,
-0x01,0xE3,0xE0,0x00,0x03,0xE3,0xC0,0x00,0x03,0xC7,0x80,0x00,0x03,0xC7,0xFF,0xFF,
-0x07,0x8F,0xFF,0xFF,0x07,0x8F,0x00,0x0F,0x0F,0x1E,0x00,0x1E,0x0F,0x3C,0x1E,0x1E,
-0x1F,0x3C,0x1E,0x3E,0x1F,0x18,0x1E,0x3C,0x3F,0x00,0x1E,0x1C,0x7F,0x00,0x1E,0x00,
-0x7F,0x07,0x9E,0x70,0xFF,0x07,0x9E,0xF0,0xEF,0x0F,0x9E,0x78,0x6F,0x0F,0x1E,0x78,
-0x0F,0x0F,0x1E,0x3C,0x0F,0x1E,0x1E,0x3C,0x0F,0x1E,0x1E,0x1E,0x0F,0x3C,0x1E,0x1E,
-0x0F,0x3C,0x1E,0x1F,0x0F,0x7C,0x1E,0x0F,0x0F,0x78,0x1E,0x0E,0x0F,0x00,0x1E,0x00,
-0x0F,0x00,0x1E,0x00,0x0F,0x00,0x3C,0x00,0x0F,0x07,0xFC,0x00,0x0F,0x07,0xF8,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  好  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"好",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,
-0x0F,0x07,0xFF,0xFE,0x0F,0x07,0xFF,0xFE,0x0F,0x00,0x00,0x3E,0x1E,0x00,0x00,0xFC,
-0xFF,0xF8,0x01,0xF0,0xFF,0xF8,0x03,0xE0,0x1E,0x78,0x07,0xC0,0x1E,0x78,0x0F,0x80,
-0x3C,0x78,0x0F,0x00,0x3C,0x78,0x0F,0x00,0x3C,0x78,0x0F,0x00,0x3C,0x78,0x0F,0x00,
-0x3C,0x7F,0xFF,0xFF,0x78,0xFF,0xFF,0xFF,0x78,0xF0,0x0F,0x00,0x78,0xF0,0x0F,0x00,
-0x3D,0xE0,0x0F,0x00,0x1F,0xE0,0x0F,0x00,0x0F,0xE0,0x0F,0x00,0x07,0xC0,0x0F,0x00,
-0x07,0xE0,0x0F,0x00,0x07,0xF0,0x0F,0x00,0x0F,0xF8,0x0F,0x00,0x1E,0x7C,0x0F,0x00,
-0x3C,0x38,0x0F,0x00,0x78,0x00,0x0F,0x00,0xF0,0x03,0xFF,0x00,0x60,0x01,0xFE,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  微  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"微",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x01,0xE0,0x07,0x87,0x01,0xE0,
-0x07,0x07,0x01,0xC0,0x0F,0xF7,0x79,0xC0,0x1E,0xF7,0x7B,0xC0,0x1E,0xF7,0x7B,0x80,
-0x3C,0xF7,0x7B,0xFF,0x78,0xF7,0x7B,0xFF,0xF8,0xF7,0x7F,0x9E,0xF7,0xFF,0xFF,0x9E,
-0x67,0xFF,0xFF,0x9E,0x07,0x00,0x7F,0x9C,0x0F,0x00,0x0F,0x9C,0x1E,0x00,0x1F,0x9C,
-0x1E,0x7F,0xFF,0xBC,0x3E,0x7F,0xF3,0xFC,0x3E,0x00,0x03,0xFC,0x7E,0x00,0x01,0xF8,
-0xFE,0x00,0x01,0xF8,0xFE,0x7F,0xE1,0xF8,0xDE,0x7F,0xE1,0xF8,0x1E,0x78,0xE0,0xF0,
-0x1E,0x78,0xEE,0xF0,0x1E,0x78,0xFF,0xF0,0x1E,0x78,0xFD,0xF8,0x1E,0x79,0xFB,0xFC,
-0x1E,0xF1,0xF7,0xBC,0x1E,0xF0,0xEF,0x9E,0x1F,0xE0,0x0F,0x0F,0x1E,0xC0,0x1E,0x0F,
-0x1E,0x00,0x0C,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  软  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"软",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x03,0xC0,0x78,0x00,0x07,0x80,0x78,0x00,0x07,0x80,0x78,0x00,
-0x07,0x80,0xF0,0x00,0x0F,0x00,0xF0,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0x1E,0x03,0xC0,0x1F,0x1E,0x03,0xC0,0x1E,0x1F,0xE7,0x8F,0x3E,0x3D,0xE7,0x8F,0x3C,
-0x3D,0xEF,0x0F,0x7C,0x3D,0xE7,0x0F,0x78,0x79,0xE0,0x0F,0x00,0x79,0xE0,0x0E,0x00,
-0x7F,0xFE,0x0E,0x00,0x7F,0xFE,0x1F,0x00,0x01,0xE0,0x1F,0x00,0x01,0xE0,0x1F,0x00,
-0x01,0xE0,0x1F,0x80,0x01,0xE0,0x1F,0x80,0x01,0xE0,0x3F,0x80,0x01,0xFF,0x3F,0xC0,
-0x0F,0xFF,0x7B,0xC0,0xFF,0xF0,0x79,0xE0,0xF9,0xE0,0xF1,0xF0,0x01,0xE1,0xF0,0xF0,
-0x01,0xE3,0xE0,0xF8,0x01,0xE7,0xC0,0x7C,0x01,0xFF,0x80,0x3F,0x01,0xFF,0x00,0x1F,
-0x01,0xEC,0x00,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  雅  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"雅",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x77,0x00,0x00,0x00,0xFF,0x00,
-0x7F,0xFC,0xF7,0x80,0x7F,0xFD,0xE3,0xC0,0x01,0xC1,0xE3,0xC0,0x01,0xC3,0xC1,0x80,
-0x3D,0xC7,0xFF,0xFF,0x39,0xC7,0xFF,0xFF,0x39,0xCF,0x83,0x80,0x79,0xDF,0x83,0x80,
-0x79,0xFF,0x83,0x80,0x79,0xDF,0x83,0x80,0x71,0xC3,0x83,0x80,0x7F,0xFF,0xFF,0xFE,
-0x7F,0xFF,0xFF,0xFE,0x03,0xC3,0x83,0x80,0x07,0xC3,0x83,0x80,0x07,0xC3,0x83,0x80,
-0x0F,0xC3,0x83,0x80,0x0F,0xC3,0x83,0x80,0x1F,0xC3,0xFF,0xFE,0x1D,0xC3,0xFF,0xFE,
-0x3D,0xC3,0x83,0x80,0x79,0xC3,0x83,0x80,0xF1,0xC3,0x83,0x80,0xF1,0xC3,0x83,0x80,
-0x61,0xC3,0x83,0x80,0x01,0xC3,0xFF,0xFF,0x03,0xC3,0xFF,0xFF,0x1F,0xC3,0x80,0x00,
-0x1F,0x83,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  黑  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"黑",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x1F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xFC,0x1E,0x03,0xC0,0x3C,0x1E,0xC3,0xC7,0x3C,
-0x1F,0xE3,0xC7,0xBC,0x1E,0xF3,0xCF,0x3C,0x1E,0xFB,0xDF,0x3C,0x1E,0x7B,0xDE,0x3C,
-0x1E,0x33,0xDC,0x3C,0x1E,0x03,0xC0,0x3C,0x1F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xFC,
-0x1E,0x03,0xC0,0x3C,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x3F,0xFF,0xFF,0xFC,
-0x3F,0xFF,0xFF,0xFC,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x1C,0x38,0x70,0x70,
-0x3E,0x78,0xF8,0xF8,0x3C,0x7C,0x78,0x7C,0x7C,0x3C,0x3C,0x3E,0xF8,0x3E,0x3C,0x1F,
-0xF0,0x1C,0x18,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  此  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"此",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x3C,0x00,
-0x00,0x78,0x3C,0x00,0x00,0x78,0x3C,0x00,0x00,0x78,0x3C,0x00,0x00,0x78,0x3C,0x00,
-0x00,0x78,0x3C,0x0C,0x3C,0x78,0x3C,0x1E,0x3C,0x78,0x3C,0x3F,0x3C,0x78,0x3C,0xF8,
-0x3C,0x7F,0xFD,0xF0,0x3C,0x7F,0xFF,0xE0,0x3C,0x78,0x3F,0x80,0x3C,0x78,0x3E,0x00,
-0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x00,
-0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x0E,0x3C,0x78,0x3C,0x0F,
-0x3C,0x78,0x3C,0x0F,0x3C,0x79,0xFC,0x0F,0x3C,0x7F,0xFC,0x0F,0x3F,0xFF,0x3C,0x0F,
-0x3F,0xF0,0x3E,0x1E,0xFF,0x00,0x1F,0xFE,0xF0,0x00,0x0F,0xFC,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  字  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"字",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x00,0x00,0x07,0x80,0x00,0x00,0x03,0xC0,0x00,
-0x00,0x03,0xE0,0x00,0x00,0x01,0xE0,0x00,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
-0x78,0x00,0x00,0x1E,0x78,0x00,0x00,0x1E,0x78,0x00,0x00,0x1E,0x78,0x00,0x00,0x1E,
-0x7B,0xFF,0xFF,0xDE,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x0F,0xC0,0x00,0x00,0x3F,0x00,
-0x00,0x00,0x7E,0x00,0x00,0x01,0xF8,0x00,0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,
-0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,
-0x00,0x03,0xE0,0x00,0x00,0x03,0xC0,0x00,0x00,0xFF,0xC0,0x00,0x00,0xFF,0x80,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  体  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"体",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x3C,0x00,
-0x03,0xC0,0x3C,0x00,0x03,0xC0,0x3C,0x00,0x07,0x80,0x3C,0x00,0x07,0x80,0x3C,0x00,
-0x07,0x80,0x3C,0x00,0x0F,0xFF,0xFF,0xFF,0x0F,0xFF,0xFF,0xFF,0x1F,0x01,0xFE,0x00,
-0x1F,0x01,0xFF,0x00,0x3F,0x01,0xFF,0x00,0x3F,0x03,0xFF,0x00,0x7F,0x03,0xFF,0x80,
-0x7F,0x07,0xBF,0x80,0xFF,0x07,0xBF,0xC0,0xEF,0x0F,0x3D,0xC0,0xCF,0x0F,0x3D,0xE0,
-0x0F,0x1E,0x3D,0xE0,0x0F,0x1E,0x3C,0xF0,0x0F,0x3C,0x3C,0x78,0x0F,0x7C,0x3C,0x7C,
-0x0F,0xF8,0x3C,0x3E,0x0F,0xF7,0xFF,0xDF,0x0F,0xE7,0xFF,0xCF,0x0F,0xC0,0x3C,0x06,
-0x0F,0x00,0x3C,0x00,0x0F,0x00,0x3C,0x00,0x0F,0x00,0x3C,0x00,0x0F,0x00,0x3C,0x00,
-0x0F,0x00,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  下  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"下",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
-0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
-0x00,0x0F,0xE0,0x00,0x00,0x0F,0xF8,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xBF,0x00,
-0x00,0x0F,0x9F,0x80,0x00,0x0F,0x87,0xE0,0x00,0x0F,0x83,0xF0,0x00,0x0F,0x80,0xF8,
-0x00,0x0F,0x80,0x7C,0x00,0x0F,0x80,0x38,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
-0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
-0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  对  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"对",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,
-0x00,0x00,0x00,0x78,0x00,0x00,0x00,0x78,0x7F,0xFC,0x00,0x78,0x7F,0xFC,0x00,0x78,
-0x00,0x3C,0x00,0x78,0x00,0x3F,0xFF,0xFF,0x30,0x3F,0xFF,0xFF,0x78,0x3C,0x00,0x78,
-0x3C,0x38,0x00,0x78,0x3E,0x78,0x00,0x78,0x1E,0x78,0xC0,0x78,0x0F,0x79,0xE0,0x78,
-0x0F,0xF0,0xF0,0x78,0x07,0xF0,0xF8,0x78,0x03,0xF0,0x78,0x78,0x01,0xE0,0x3C,0x78,
-0x03,0xF0,0x3E,0x78,0x03,0xF0,0x18,0x78,0x07,0xF8,0x00,0x78,0x07,0xFC,0x00,0x78,
-0x0F,0x3E,0x00,0x78,0x1F,0x1E,0x00,0x78,0x3E,0x1F,0x00,0x78,0x7C,0x0E,0x00,0xF8,
-0xF8,0x00,0x00,0xF0,0xF0,0x00,0x3F,0xF0,0x60,0x00,0x3F,0xE0,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  应  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"应",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x01,0xC0,0x00,0x00,0x03,0xE0,0x00,0x00,0x01,0xE0,0x00,
-0x00,0x01,0xF0,0x00,0x00,0x00,0xF0,0x00,0x1F,0xFF,0xFF,0xFF,0x1F,0xFF,0xFF,0xFF,
-0x1E,0x00,0x00,0x00,0x1E,0x00,0x00,0x00,0x1E,0x01,0xE0,0x78,0x1E,0x01,0xE0,0x78,
-0x1E,0xE1,0xE0,0x78,0x1F,0xF1,0xF0,0xF8,0x1E,0xF0,0xF0,0xF0,0x1E,0xF0,0xF0,0xF0,
-0x1E,0xF8,0xF0,0xF0,0x1E,0x78,0xF1,0xF0,0x1E,0x78,0xF9,0xE0,0x1E,0x78,0x79,0xE0,
-0x1E,0x7C,0x7B,0xE0,0x1E,0x3C,0x7B,0xC0,0x1E,0x3C,0x7B,0xC0,0x1E,0x3C,0x7B,0xC0,
-0x3C,0x3E,0x07,0x80,0x3C,0x1C,0x07,0x80,0x3C,0x00,0x07,0x80,0x3C,0x00,0x0F,0x00,
-0x78,0x00,0x0F,0x00,0x7B,0xFF,0xFF,0xFF,0xF3,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,
-0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  的  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"的",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x3C,0x00,0x07,0xC0,0x3E,0x00,
-0x07,0x80,0x3C,0x00,0x07,0x80,0x7C,0x00,0x0F,0x00,0x78,0x00,0x7F,0xFE,0x7F,0xFE,
-0x7F,0xFE,0xFF,0xFE,0x78,0x1E,0xF0,0x1E,0x78,0x1F,0xE0,0x1E,0x78,0x1F,0xE0,0x1E,
-0x78,0x1F,0xC0,0x1E,0x78,0x1F,0xC0,0x1E,0x78,0x1F,0xF0,0x1E,0x78,0x1E,0xF8,0x1E,
-0x78,0x1E,0x7C,0x1E,0x7F,0xFE,0x3C,0x1E,0x7F,0xFE,0x1E,0x1E,0x78,0x1E,0x1F,0x1E,
-0x78,0x1E,0x0F,0x9E,0x78,0x1E,0x07,0x9E,0x78,0x1E,0x07,0x1E,0x78,0x1E,0x00,0x1E,
-0x78,0x1E,0x00,0x1E,0x78,0x1E,0x00,0x3E,0x78,0x1E,0x00,0x3C,0x78,0x1E,0x00,0x3C,
-0x7F,0xFE,0x00,0x3C,0x7F,0xFE,0x00,0x7C,0x78,0x1E,0x3F,0xF8,0x78,0x1E,0x3F,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  点  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"点",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
-0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xFF,0xFF,0x00,0x03,0xFF,0xFF,
-0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
-0x0F,0xFF,0xFF,0xF8,0x0F,0xFF,0xFF,0xF8,0x0F,0x00,0x00,0x78,0x0F,0x00,0x00,0x78,
-0x0F,0x00,0x00,0x78,0x0F,0x00,0x00,0x78,0x0F,0x00,0x00,0x78,0x0F,0x00,0x00,0x78,
-0x0F,0xFF,0xFF,0xF8,0x0F,0xFF,0xFF,0xF8,0x0F,0x00,0x00,0x78,0x00,0x00,0x00,0x00,
-0x0C,0x38,0x38,0x30,0x1E,0x7C,0x78,0x78,0x3E,0x3C,0x78,0x78,0x3C,0x3C,0x3C,0x3C,
-0x7C,0x3E,0x3C,0x3E,0xF8,0x1E,0x3C,0x1E,0xF0,0x1E,0x1E,0x1F,0x70,0x1E,0x1C,0x0E,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  阵  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"阵",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x78,0x00,
-0x7F,0xF0,0x78,0x00,0x7F,0xF0,0x78,0x00,0x79,0xFF,0xFF,0xFF,0x79,0xFF,0xFF,0xFF,
-0x79,0xE1,0xE0,0x00,0x79,0xE1,0xE0,0x00,0x7B,0xC1,0xEF,0x80,0x7B,0xC3,0xCF,0x80,
-0x7B,0xC3,0xCF,0x80,0x7F,0x87,0xCF,0x80,0x7F,0x87,0x8F,0x80,0x7F,0x87,0x8F,0x80,
-0x7B,0xCF,0x0F,0x80,0x7B,0xCF,0xFF,0xFE,0x79,0xEF,0xFF,0xFE,0x79,0xE0,0x0F,0x80,
-0x78,0xE0,0x0F,0x80,0x78,0xF0,0x0F,0x80,0x78,0xF0,0x0F,0x80,0x78,0xF0,0x0F,0x80,
-0x78,0xFF,0xFF,0xFF,0x79,0xFF,0xFF,0xFF,0x7F,0xE0,0x0F,0x80,0x7F,0xC0,0x0F,0x80,
-0x78,0x00,0x0F,0x80,0x78,0x00,0x0F,0x80,0x78,0x00,0x0F,0x80,0x78,0x00,0x0F,0x80,
-0x78,0x00,0x0F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  为  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"为",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,
-0x0E,0x07,0x80,0x00,0x1F,0x07,0x80,0x00,0x0F,0x87,0x80,0x00,0x07,0xC7,0x80,0x00,
-0x01,0xE7,0x80,0x00,0x00,0xC7,0x80,0x00,0x00,0x07,0x80,0x00,0x7F,0xFF,0xFF,0xFC,
-0x7F,0xFF,0xFF,0xFC,0x00,0x07,0x80,0x3C,0x00,0x0F,0x80,0x3C,0x00,0x0F,0x00,0x3C,
-0x00,0x0F,0x00,0x3C,0x00,0x0F,0x60,0x3C,0x00,0x1F,0xF0,0x3C,0x00,0x1E,0x78,0x3C,
-0x00,0x3E,0x3C,0x3C,0x00,0x3C,0x3E,0x3C,0x00,0x7C,0x1F,0x3C,0x00,0x78,0x0F,0x3C,
-0x00,0xF8,0x06,0x3C,0x01,0xF0,0x00,0x3C,0x03,0xE0,0x00,0x7C,0x07,0xC0,0x00,0x7C,
-0x0F,0x80,0x00,0x78,0x1F,0x00,0x00,0xF8,0x3E,0x00,0xFF,0xF0,0x7C,0x00,0xFF,0xE0,
-0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  树  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"树",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x38,
-0x0F,0x00,0x00,0x38,0x0F,0x00,0x00,0x38,0x0F,0x3F,0xF8,0x38,0x0F,0x3F,0xF8,0x38,
-0x0F,0x00,0x78,0x38,0xFF,0xE0,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0x0F,0x00,0x70,0x38,
-0x0F,0x18,0xF0,0x38,0x1F,0x3C,0xF0,0x38,0x1F,0x1C,0xFE,0x38,0x1F,0xDE,0xFE,0x38,
-0x3F,0xEF,0xEF,0x38,0x3F,0xFF,0xEF,0x38,0x3F,0xF7,0xE7,0xB8,0x7F,0x67,0xC7,0xB8,
-0x7F,0x03,0xC3,0xB8,0xFF,0x07,0xE0,0x38,0xEF,0x07,0xE0,0x38,0xEF,0x0F,0xF0,0x38,
-0xCF,0x1F,0xF0,0x38,0x0F,0x1E,0x78,0x38,0x0F,0x3C,0x7C,0x38,0x0F,0x78,0x3C,0x38,
-0x0F,0xF8,0x38,0x38,0x0F,0x60,0x00,0x78,0x0F,0x00,0x0F,0xF8,0x0F,0x00,0x07,0xF0,
-0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  莓  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"莓",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x1E,0x00,0x00,0x3C,0x1E,0x00,
-0x00,0x3C,0x1E,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x3C,0x1E,0x00,
-0x07,0xBC,0x1E,0x00,0x07,0x80,0x00,0x00,0x0F,0xFF,0xFF,0xFC,0x0F,0xFF,0xFF,0xFC,
-0x1E,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x7F,0xFF,0xFF,0xF0,
-0xF7,0xFF,0xFF,0xF0,0x37,0x83,0x80,0xF0,0x07,0x87,0xC0,0xF0,0x07,0x83,0xF0,0xF0,
-0x07,0x00,0xE0,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0x0F,0x00,0xE0,
-0x0F,0x0F,0x81,0xE0,0x0E,0x03,0xE1,0xE0,0x1E,0x01,0xC1,0xE0,0x1F,0xFF,0xFF,0xFE,
-0x1F,0xFF,0xFF,0xFE,0x00,0x00,0x01,0xE0,0x00,0x00,0x03,0xC0,0x00,0x00,0xFF,0xC0,
-0x00,0x00,0xFF,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  派  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"派",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x00,0x3E,
-0x7C,0x00,0x3F,0xFE,0x3F,0x3F,0xFF,0xF0,0x1F,0xBF,0xE0,0x00,0x07,0xBC,0x00,0x00,
-0x03,0x3C,0x00,0x00,0x00,0x3C,0x00,0x3C,0x00,0x3C,0x0F,0xFE,0x70,0x3D,0xFF,0xF8,
-0xF8,0x3D,0xFF,0x00,0x7C,0x3D,0xE7,0x80,0x3F,0x3D,0xE7,0x80,0x1F,0x3D,0xE7,0x8E,
-0x0E,0x3D,0xE7,0x9F,0x00,0x3D,0xE7,0xFE,0x00,0x39,0xE7,0xF8,0x00,0x39,0xE3,0xF0,
-0x1C,0x39,0xE3,0xC0,0x1E,0x79,0xE3,0xC0,0x1E,0x79,0xE1,0xE0,0x1E,0x79,0xE1,0xE0,
-0x3C,0x79,0xE0,0xF0,0x3C,0x79,0xE0,0xF8,0x3C,0xF1,0xE0,0x7C,0x3C,0xF1,0xE3,0x7C,
-0x7D,0xF1,0xEF,0x3F,0x79,0xE1,0xFE,0x1F,0x7B,0xE1,0xF8,0x0E,0x7B,0xC3,0xE0,0x00,
-0x79,0x81,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  A  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{
-"A",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x7C,0x00,0x00,0x00,0xFC,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0xFE,0x00,0x00,
-0x01,0xFF,0x00,0x00,0x01,0xFF,0x00,0x00,0x01,0xEF,0x00,0x00,0x03,0xEF,0x80,0x00,
-0x03,0xCF,0x80,0x00,0x07,0xC7,0x80,0x00,0x07,0xC7,0xC0,0x00,0x07,0x87,0xC0,0x00,
-0x0F,0x83,0xE0,0x00,0x0F,0x83,0xE0,0x00,0x0F,0x01,0xE0,0x00,0x1F,0xFF,0xF0,0x00,
-0x1F,0xFF,0xF0,0x00,0x3F,0xFF,0xF8,0x00,0x3E,0x00,0xF8,0x00,0x3C,0x00,0xF8,0x00,
-0x7C,0x00,0x7C,0x00,0x7C,0x00,0x7C,0x00,0x78,0x00,0x3C,0x00,0xF8,0x00,0x3E,0x00,
-0xF8,0x00,0x3E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  a  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"a",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xF8,0x00,0x00,
-0x1F,0xFE,0x00,0x00,0x3F,0xFE,0x00,0x00,0x3E,0x3F,0x00,0x00,0x38,0x1F,0x00,0x00,
-0x00,0x0F,0x00,0x00,0x00,0x0F,0x00,0x00,0x03,0xFF,0x00,0x00,0x1F,0xFF,0x00,0x00,
-0x3F,0x8F,0x00,0x00,0x7C,0x0F,0x00,0x00,0x7C,0x0F,0x00,0x00,0x78,0x1F,0x00,0x00,
-0x7C,0x1F,0x00,0x00,0x7E,0x7F,0x00,0x00,0x7F,0xFF,0x00,0x00,0x3F,0xFF,0x00,0x00,
-0x0F,0xCF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  b  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"b",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,
-0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,
-0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0xFE,0x00,0x00,
-0x3D,0xFF,0x80,0x00,0x3F,0xFF,0xC0,0x00,0x3F,0x8F,0xC0,0x00,0x3F,0x07,0xE0,0x00,
-0x3E,0x03,0xE0,0x00,0x3E,0x03,0xE0,0x00,0x3C,0x01,0xE0,0x00,0x3C,0x01,0xE0,0x00,
-0x3C,0x01,0xE0,0x00,0x3C,0x03,0xE0,0x00,0x3E,0x03,0xE0,0x00,0x3E,0x03,0xE0,0x00,
-0x3F,0x07,0xC0,0x00,0x3F,0x8F,0xC0,0x00,0x3F,0xFF,0x80,0x00,0x3F,0xFF,0x00,0x00,
-0x3C,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  c  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"c",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xFC,0x00,0x00,
-0x07,0xFE,0x00,0x00,0x1F,0xFE,0x00,0x00,0x3F,0x86,0x00,0x00,0x3E,0x00,0x00,0x00,
-0x7C,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x78,0x00,0x00,0x00,
-0x78,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,
-0x3E,0x00,0x00,0x00,0x3F,0x86,0x00,0x00,0x1F,0xFE,0x00,0x00,0x0F,0xFE,0x00,0x00,
-0x03,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  微  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"微",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x01,0xE0,0x07,0x87,0x01,0xE0,
-0x07,0x07,0x01,0xC0,0x0F,0xF7,0x79,0xC0,0x1E,0xF7,0x7B,0xC0,0x1E,0xF7,0x7B,0x80,
-0x3C,0xF7,0x7B,0xFF,0x78,0xF7,0x7B,0xFF,0xF8,0xF7,0x7F,0x9E,0xF7,0xFF,0xFF,0x9E,
-0x67,0xFF,0xFF,0x9E,0x07,0x00,0x7F,0x9C,0x0F,0x00,0x0F,0x9C,0x1E,0x00,0x1F,0x9C,
-0x1E,0x7F,0xFF,0xBC,0x3E,0x7F,0xF3,0xFC,0x3E,0x00,0x03,0xFC,0x7E,0x00,0x01,0xF8,
-0xFE,0x00,0x01,0xF8,0xFE,0x7F,0xE1,0xF8,0xDE,0x7F,0xE1,0xF8,0x1E,0x78,0xE0,0xF0,
-0x1E,0x78,0xEE,0xF0,0x1E,0x78,0xFF,0xF0,0x1E,0x78,0xFD,0xF8,0x1E,0x79,0xFB,0xFC,
-0x1E,0xF1,0xF7,0xBC,0x1E,0xF0,0xEF,0x9E,0x1F,0xE0,0x0F,0x0F,0x1E,0xC0,0x1E,0x0F,
-0x1E,0x00,0x0C,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  雪  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"雪",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x1F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF8,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
-0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x78,0x03,0xC0,0x1E,0x78,0x03,0xC0,0x1E,
-0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
-0x07,0xFF,0xFF,0xE0,0x07,0xFF,0xFF,0xE0,0x00,0x03,0xC0,0x00,0x00,0x00,0x00,0x00,
-0x1F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF8,0x00,0x00,0x00,0x78,0x00,0x00,0x00,0x78,
-0x1F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF8,0x00,0x00,0x00,0x78,0x00,0x00,0x00,0x78,
-0x00,0x00,0x00,0x78,0x3F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xF8,0x00,0x00,0x00,0x78,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  电  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"电",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0x07,0x80,0x00,
-0x00,0x07,0x80,0x00,0x00,0x07,0x80,0x00,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xF8,
-0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,
-0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xF8,
-0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,
-0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xF8,
-0x78,0x07,0x80,0x0E,0x78,0x07,0x80,0x0F,0x00,0x07,0x80,0x0F,0x00,0x07,0x80,0x0F,
-0x00,0x07,0x80,0x1F,0x00,0x07,0x80,0x1E,0x00,0x03,0xFF,0xFE,0x00,0x01,0xFF,0xFC,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-/*--  文字:  子  --*/
-/*--  微软雅黑24;  此字体下对应的点阵为：宽x高=32x41   --*/
-{"子",
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x1F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF8,0x00,0x00,0x01,0xF8,0x00,0x00,0x07,0xE0,
-0x00,0x00,0x0F,0xC0,0x00,0x00,0x1F,0x80,0x00,0x00,0x3E,0x00,0x00,0x00,0xFC,0x00,
-0x00,0x01,0xF8,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,
-0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,
-0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,
-0x00,0x03,0xE0,0x00,0x00,0x03,0xC0,0x00,0x01,0xFF,0xC0,0x00,0x00,0xFF,0x80,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00},
-
-
-};
-
-cFONT Font24CN = {
-  Font24CN_Table,
-  sizeof(Font24CN_Table)/sizeof(CH_CN),  /*size of table*/
-  24, /* ASCII Width */
-  32, /* Width */
-  41, /* Height */
-};
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Jetson Nano/c/lib/Fonts/fonts.h

@@ -1,97 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    fonts.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    18-February-2014
-  * @brief   Header for fonts.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __FONTS_H
-#define __FONTS_H
-
-/*最大字体微软雅黑24 (32x41) */
-#define MAX_HEIGHT_FONT         41
-#define MAX_WIDTH_FONT          32
-#define OFFSET_BITMAP           
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include <stdint.h>
-
-//ASCII
-typedef struct _tFont
-{    
-  const uint8_t *table;
-  uint16_t Width;
-  uint16_t Height;
-  
-} sFONT;
-
-
-//GB2312
-typedef struct                                          // 汉字字模数据结构
-{
-  unsigned char index[2];                               // 汉字内码索引
-  const char matrix[MAX_HEIGHT_FONT*MAX_WIDTH_FONT/8];  // 点阵码数据
-}CH_CN;
-
-
-typedef struct
-{    
-  const CH_CN *table;
-  uint16_t size;
-  uint16_t ASCII_Width;
-  uint16_t Width;
-  uint16_t Height;
-  
-}cFONT;
-
-extern sFONT Font24;
-extern sFONT Font20;
-extern sFONT Font16;
-extern sFONT Font12;
-extern sFONT Font8;
-
-extern cFONT Font12CN;
-extern cFONT Font24CN;
-#ifdef __cplusplus
-}
-#endif
-  
-#endif /* __FONTS_H */
- 
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Jetson Nano/c/lib/GUI/GUI_BMPfile.c

@@ -1,132 +0,0 @@
-/*****************************************************************************
-* | File      	:   GUI_BMPfile.c
-* | Author      :   Waveshare team
-* | Function    :   Hardware underlying interface
-* | Info        :
-*                Used to shield the underlying layers of each master
-*                and enhance portability
-*----------------
-* |	This version:   V2.0
-* | Date        :   2018-11-12
-* | Info        :
-* 1.Change file name: GUI_BMP.c -> GUI_BMPfile.c
-* 2.fix: GUI_ReadBmp()
-*   Now Xstart and Xstart can control the position of the picture normally,
-*   and support the display of images of any size. If it is larger than
-*   the actual display range, it will not be displayed.
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-
-#include "GUI_BMPfile.h"
-#include "GUI_Paint.h"
-#include "Debug.h"
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdint.h>
-#include <stdlib.h>	//exit()
-#include <string.h> //memset()
-#include <math.h> //memset()
-
-UBYTE GUI_ReadBmp(const char *path, UWORD Xstart, UWORD Ystart)
-{
-    FILE *fp;                     //Define a file pointer
-    BMPFILEHEADER bmpFileHeader;  //Define a bmp file header structure
-    BMPINFOHEADER bmpInfoHeader;  //Define a bmp info header structure
-
-
-    // Binary file open
-    if((fp = fopen(path, "rb")) == NULL) {
-        Debug("Cann't open the file!\n");
-        exit(0);
-    }
-
-    // Set the file pointer from the beginning
-    fseek(fp, 0, SEEK_SET);
-    fread(&bmpFileHeader, sizeof(BMPFILEHEADER), 1, fp);    //sizeof(BMPFILEHEADER) must be 14
-    fread(&bmpInfoHeader, sizeof(BMPINFOHEADER), 1, fp);    //sizeof(BMPFILEHEADER) must be 50
-    printf("pixel = %d * %d\r\n", bmpInfoHeader.biWidth, bmpInfoHeader.biHeight);
-
-    UWORD Image_Width_Byte = (bmpInfoHeader.biWidth % 8 == 0)? (bmpInfoHeader.biWidth / 8): (bmpInfoHeader.biWidth / 8 + 1);
-    UWORD Bmp_Width_Byte = (Image_Width_Byte % 4 == 0) ? Image_Width_Byte: ((Image_Width_Byte / 4 + 1) * 4);
-    UBYTE Image[Image_Width_Byte * bmpInfoHeader.biHeight];
-    memset(Image, 0xFF, Image_Width_Byte * bmpInfoHeader.biHeight);
-
-    // Determine if it is a monochrome bitmap
-    int readbyte = bmpInfoHeader.biBitCount;
-    if(readbyte != 1) {
-        Debug("the bmp Image is not a monochrome bitmap!\n");
-        exit(0);
-    }
-
-    // Determine black and white based on the palette
-    UWORD i;
-    UWORD Bcolor, Wcolor;
-    // UWORD bmprgbquadsize = pow(2, bmpInfoHeader.biBitCount);// 2^1 = 2
-    // BMPRGBQUAD bmprgbquad[bmprgbquadsize];        //palette
-    BMPRGBQUAD bmprgbquad[2];        //palette
-
-    // for(i = 0; i < bmprgbquadsize; i++){
-    for(i = 0; i < 2; i++) {
-        fread(&bmprgbquad[i * 4], sizeof(BMPRGBQUAD), 1, fp);
-    }
-    if(bmprgbquad[0].rgbBlue == 0xff && bmprgbquad[0].rgbGreen == 0xff && bmprgbquad[0].rgbRed == 0xff) {
-        Bcolor = BLACK;
-        Wcolor = WHITE;
-    } else {
-        Bcolor = WHITE;
-        Wcolor = BLACK;
-    }
-
-    // Read image data into the cache
-    UWORD x, y;
-    UBYTE Rdata;
-    fseek(fp, bmpFileHeader.bOffset, SEEK_SET);
-    for(y = 0; y < bmpInfoHeader.biHeight; y++) {//Total display column
-        for(x = 0; x < Bmp_Width_Byte; x++) {//Show a line in the line
-            if(fread((char *)&Rdata, 1, readbyte, fp) != readbyte) {
-                perror("get bmpdata:\r\n");
-                break;
-            }
-            if(x < Image_Width_Byte) { //bmp
-                Image[x + (bmpInfoHeader.biHeight - y - 1) * Image_Width_Byte] =  Rdata;
-                // printf("rdata = %d\r\n", Rdata);
-            }
-        }
-    }
-    fclose(fp);
-
-    // Refresh the image to the display buffer based on the displayed orientation
-    UBYTE color, temp;
-    for(y = 0; y < bmpInfoHeader.biHeight; y++) {
-        for(x = 0; x < bmpInfoHeader.biWidth; x++) {
-            if(x > Paint.Width || y > Paint.Height) {
-                break;
-            }
-            temp = Image[(x / 8) + (y * Image_Width_Byte)];
-            color = (((temp << (x%8)) & 0x80) == 0x80) ?Bcolor:Wcolor;
-            Paint_SetPixel(Xstart + x, Ystart + y, color);
-        }
-    }
-    return 0;
-}
-
-

Jetson Nano/c/lib/e-Paper/EPD_2in7b.c

@@ -1,369 +0,0 @@
-/*****************************************************************************
-* | File      	:   EPD_2in7b.c
-* | Author      :   Waveshare team
-* | Function    :   2.7inch e-paper b
-* | Info        :
-*----------------
-* |	This version:   V3.0
-* | Date        :   2019-06-12
-* | Info        :
-* -----------------------------------------------------------------------------
-* V3.0(2019-06-12): 
-*    lut_vcom_dc[] => EPD_2in7B_lut_vcom_dc[]
-*    lut_ww[] => EPD_2in7B_lut_ww[] 
-*    lut_bw[] => EPD_2in7B_lut_bw[]
-*    lut_bb[] => EPD_2in7B_lut_bb[]
-*    lut_wb[] => EPD_2in7B_lut_wb[]
-*    EPD_Reset() => EPD_2in7B_Reset()
-*    EPD_SendCommand() => EPD_2in7B_SendCommand()
-*    EPD_SendData() => EPD_2in7B_SendData()
-*    EPD_WaitUntilIdle() => EPD_2in7B_ReadBusy()
-*    EPD_SetLut() => EPD_2in7B_SetLut()
-*    EPD_Init() => EPD_2in7B_Init()
-*    EPD_Clear() => EPD_2in7B_Clear()
-*    EPD_Display() => EPD_2in7B_Display()
-*    EPD_Sleep() => EPD_2in7B_Sleep()
-* 2.remove commands define:
-*    #define PANEL_SETTING                               0x00
-*    #define POWER_SETTING                               0x01
-*    #define POWER_OFF                                   0x02
-*    #define POWER_OFF_SEQUENCE_SETTING                  0x03
-*    #define POWER_ON                                    0x04
-*    #define POWER_ON_MEASURE                            0x05
-*    #define BOOSTER_SOFT_START                          0x06
-*    #define DEEP_SLEEP                                  0x07
-*    #define DATA_START_TRANSMISSION_1                   0x10
-*    #define DATA_STOP                                   0x11
-*    #define DISPLAY_REFRESH                             0x12
-*    #define DATA_START_TRANSMISSION_2                   0x13
-*    #define PARTIAL_DATA_START_TRANSMISSION_1           0x14
-*    #define PARTIAL_DATA_START_TRANSMISSION_2           0x15
-*    #define PARTIAL_DISPLAY_REFRESH                     0x16
-*    #define LUT_FOR_VCOM                                0x20
-*    #define LUT_WHITE_TO_WHITE                          0x21
-*    #define LUT_BLACK_TO_WHITE                          0x22
-*    #define LUT_WHITE_TO_BLACK                          0x23
-*    #define LUT_BLACK_TO_BLACK                          0x24
-*    #define PLL_CONTROL                                 0x30
-*    #define TEMPERATURE_SENSOR_COMMAND                  0x40
-*    #define TEMPERATURE_SENSOR_CALIBRATION              0x41
-*    #define TEMPERATURE_SENSOR_WRITE                    0x42
-*    #define TEMPERATURE_SENSOR_READ                     0x43
-*    #define VCOM_AND_DATA_INTERVAL_SETTING              0x50
-*    #define LOW_POWER_DETECTION                         0x51
-*    #define TCON_SETTING                                0x60
-*    #define TCON_RESOLUTION                             0x61
-*    #define SOURCE_AND_GATE_START_SETTING               0x62
-*    #define GET_STATUS                                  0x71
-*    #define AUTO_MEASURE_VCOM                           0x80
-*    #define VCOM_VALUE                                  0x81
-*    #define VCM_DC_SETTING_REGISTER                     0x82
-*    #define PROGRAM_MODE                                0xA0
-*    #define ACTIVE_PROGRAM                              0xA1
-*    #define READ_OTP_DATA                               0xA2
-* -----------------------------------------------------------------------------
-* V2.0(2018-10-30):
-* 1.Remove:ImageBuff[EPD_2IN7B_HEIGHT * EPD_2IN7B_WIDTH / 8]
-* 2.Change:EPD_Display(UBYTE *Image)
-*   Need to pass parameters: pointer to cached data
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "EPD_2in7b.h"
-#include "Debug.h"
-
-static const unsigned char EPD_2IN7B_lut_vcom_dc[] = {
-    0x00, 0x00,
-    0x00, 0x1A, 0x1A, 0x00, 0x00, 0x01,
-    0x00, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x00, 0x0E, 0x01, 0x0E, 0x01, 0x10,
-    0x00, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x00, 0x04, 0x10, 0x00, 0x00, 0x05,
-    0x00, 0x03, 0x0E, 0x00, 0x00, 0x0A,
-    0x00, 0x23, 0x00, 0x00, 0x00, 0x01
-};
-
-//R21H
-static const unsigned char EPD_2IN7B_lut_ww[] = {
-    0x90, 0x1A, 0x1A, 0x00, 0x00, 0x01,
-    0x40, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x84, 0x0E, 0x01, 0x0E, 0x01, 0x10,
-    0x80, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x00, 0x04, 0x10, 0x00, 0x00, 0x05,
-    0x00, 0x03, 0x0E, 0x00, 0x00, 0x0A,
-    0x00, 0x23, 0x00, 0x00, 0x00, 0x01
-};
-
-//R22H    r
-static const unsigned char EPD_2IN7B_lut_bw[] = {
-    0xA0, 0x1A, 0x1A, 0x00, 0x00, 0x01,
-    0x00, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x84, 0x0E, 0x01, 0x0E, 0x01, 0x10,
-    0x90, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0xB0, 0x04, 0x10, 0x00, 0x00, 0x05,
-    0xB0, 0x03, 0x0E, 0x00, 0x00, 0x0A,
-    0xC0, 0x23, 0x00, 0x00, 0x00, 0x01
-};
-
-//R23H    w
-static const unsigned char EPD_2IN7B_lut_bb[] = {
-    0x90, 0x1A, 0x1A, 0x00, 0x00, 0x01,
-    0x40, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x84, 0x0E, 0x01, 0x0E, 0x01, 0x10,
-    0x80, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x00, 0x04, 0x10, 0x00, 0x00, 0x05,
-    0x00, 0x03, 0x0E, 0x00, 0x00, 0x0A,
-    0x00, 0x23, 0x00, 0x00, 0x00, 0x01
-};
-
-//R24H    b
-static const unsigned char EPD_2IN7B_lut_wb[] = {
-    0x90, 0x1A, 0x1A, 0x00, 0x00, 0x01,
-    0x20, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x84, 0x0E, 0x01, 0x0E, 0x01, 0x10,
-    0x10, 0x0A, 0x0A, 0x00, 0x00, 0x08,
-    0x00, 0x04, 0x10, 0x00, 0x00, 0x05,
-    0x00, 0x03, 0x0E, 0x00, 0x00, 0x0A,
-    0x00, 0x23, 0x00, 0x00, 0x00, 0x01
-};
-
-/******************************************************************************
-function :	Software reset
-parameter:
-******************************************************************************/
-static void EPD_2IN7B_Reset(void)
-{
-    DEV_Digital_Write(EPD_RST_PIN, 1);
-    DEV_Delay_ms(200);
-    DEV_Digital_Write(EPD_RST_PIN, 0);
-    DEV_Delay_ms(10);
-    DEV_Digital_Write(EPD_RST_PIN, 1);
-    DEV_Delay_ms(200);
-}
-
-/******************************************************************************
-function :	send command
-parameter:
-     Reg : Command register
-******************************************************************************/
-static void EPD_2IN7B_SendCommand(UBYTE Reg)
-{
-    DEV_Digital_Write(EPD_DC_PIN, 0);
-    DEV_Digital_Write(EPD_CS_PIN, 0);
-    DEV_SPI_WriteByte(Reg);
-    DEV_Digital_Write(EPD_CS_PIN, 1);
-}
-
-/******************************************************************************
-function :	send data
-parameter:
-    Data : Write data
-******************************************************************************/
-static void EPD_2IN7B_SendData(UBYTE Data)
-{
-    DEV_Digital_Write(EPD_DC_PIN, 1);
-    DEV_Digital_Write(EPD_CS_PIN, 0);
-    DEV_SPI_WriteByte(Data);
-    DEV_Digital_Write(EPD_CS_PIN, 1);
-}
-
-/******************************************************************************
-function :	Wait until the busy_pin goes LOW
-parameter:
-******************************************************************************/
-static void EPD_2IN7B_ReadBusy(void)
-{
-    Debug("e-Paper busy\r\n");
-    while(DEV_Digital_Read(EPD_BUSY_PIN) == 0) {      //0: busy, 1: idle
-        DEV_Delay_ms(100);
-    }    
-    Debug("e-Paper busy release\r\n");
-}
-
-/******************************************************************************
-function :	set the look-up tables
-parameter:
-******************************************************************************/
-static void EPD_2IN7B_SetLut(void)
-{
-    unsigned int count;     
-    EPD_2IN7B_SendCommand(0x20); //vcom
-    for(count = 0; count < 44; count++) {
-        EPD_2IN7B_SendData(EPD_2IN7B_lut_vcom_dc[count]);
-    }
-    
-    EPD_2IN7B_SendCommand(0x21); //ww --
-    for(count = 0; count < 42; count++) {
-        EPD_2IN7B_SendData(EPD_2IN7B_lut_ww[count]);
-    }   
-    
-    EPD_2IN7B_SendCommand(0x22); //bw r
-    for(count = 0; count < 42; count++) {
-        EPD_2IN7B_SendData(EPD_2IN7B_lut_bw[count]);
-    } 
-
-    EPD_2IN7B_SendCommand(0x23); //wb w
-    for(count = 0; count < 42; count++) {
-        EPD_2IN7B_SendData(EPD_2IN7B_lut_bb[count]);
-    } 
-
-    EPD_2IN7B_SendCommand(0x24); //bb b
-    for(count = 0; count < 42; count++) {
-        EPD_2IN7B_SendData(EPD_2IN7B_lut_wb[count]);
-    } 
-}
-
-/******************************************************************************
-function :	Initialize the e-Paper register
-parameter:
-******************************************************************************/
-void EPD_2IN7B_Init(void)
-{
-    EPD_2IN7B_Reset();
-
-    EPD_2IN7B_SendCommand(0x04); // POWER_ON
-    EPD_2IN7B_ReadBusy();
-
-    EPD_2IN7B_SendCommand(0x00); // PANEL_SETTING
-    EPD_2IN7B_SendData(0xaf); // KW-BF   KWR-AF BWROTP 0f
-
-    EPD_2IN7B_SendCommand(0x30); // PLL_CONTROL
-    EPD_2IN7B_SendData(0x3a); //3A 100HZ   29 150Hz 39 200HZ    31 171HZ
-
-    EPD_2IN7B_SendCommand(0x01); // PANEL_SETTING
-    EPD_2IN7B_SendData(0x03); // VDS_EN, VDG_EN
-    EPD_2IN7B_SendData(0x00); // VCOM_HV, VGHL_LV[1], VGHL_LV[0]
-    EPD_2IN7B_SendData(0x2b); // VDH
-    EPD_2IN7B_SendData(0x2b); // VDL
-    EPD_2IN7B_SendData(0x09); // VDHR
-
-    EPD_2IN7B_SendCommand(0x06);  // BOOSTER_SOFT_START
-    EPD_2IN7B_SendData(0x07);
-    EPD_2IN7B_SendData(0x07);
-    EPD_2IN7B_SendData(0x17);
-
-    // Power optimization
-    EPD_2IN7B_SendCommand(0xF8);
-    EPD_2IN7B_SendData(0x60);
-    EPD_2IN7B_SendData(0xA5);
-
-    // Power optimization
-    EPD_2IN7B_SendCommand(0xF8);
-    EPD_2IN7B_SendData(0x89);
-    EPD_2IN7B_SendData(0xA5);
-
-    // Power optimization
-    EPD_2IN7B_SendCommand(0xF8);
-    EPD_2IN7B_SendData(0x90);
-    EPD_2IN7B_SendData(0x00);
-
-    // Power optimization
-    EPD_2IN7B_SendCommand(0xF8);
-    EPD_2IN7B_SendData(0x93);
-    EPD_2IN7B_SendData(0x2A);
-
-    // Power optimization
-    EPD_2IN7B_SendCommand(0xF8);
-    EPD_2IN7B_SendData(0x73);
-    EPD_2IN7B_SendData(0x41);
-
-    EPD_2IN7B_SendCommand(0x82); // VCM_DC_SETTING_REGISTER
-    EPD_2IN7B_SendData(0x12);
-    EPD_2IN7B_SendCommand(0x50); // VCOM_AND_DATA_INTERVAL_SETTING
-    EPD_2IN7B_SendData(0x87); // define by OTP
-
-    EPD_2IN7B_SetLut();
-
-    EPD_2IN7B_SendCommand(0x16); // PARTIAL_DISPLAY_REFRESH
-    EPD_2IN7B_SendData(0x00);
-}
-
-/******************************************************************************
-function :	Clear screen
-parameter:
-******************************************************************************/
-void EPD_2IN7B_Clear(void)
-{    
-    UWORD Width, Height;
-    Width = (EPD_2IN7B_WIDTH % 8 == 0)? (EPD_2IN7B_WIDTH / 8 ): (EPD_2IN7B_WIDTH / 8 + 1);
-    Height = EPD_2IN7B_HEIGHT;
-
-    EPD_2IN7B_SendCommand(0x10);
-    for (UWORD j = 0; j < Height; j++) {
-        for (UWORD i = 0; i < Width; i++) {
-            EPD_2IN7B_SendData(0X00);
-        }
-    }
-    EPD_2IN7B_SendCommand(0x11); // DATA_STOP
-
-    EPD_2IN7B_SendCommand(0x13);
-    for (UWORD j = 0; j < Height; j++) {
-        for (UWORD i = 0; i < Width; i++) {
-            EPD_2IN7B_SendData(0X00);
-        }
-    }
-    EPD_2IN7B_SendCommand(0x11); // DATA_STOP
-    
-    EPD_2IN7B_SendCommand(0x12);
-    EPD_2IN7B_ReadBusy();
-}
-
-/******************************************************************************
-function :	Sends the image buffer in RAM to e-Paper and displays
-parameter:
-******************************************************************************/
-void EPD_2IN7B_Display(UBYTE *Imageblack, UBYTE *Imagered)
-{
-    UWORD Width, Height;
-    Width = (EPD_2IN7B_WIDTH % 8 == 0)? (EPD_2IN7B_WIDTH / 8 ): (EPD_2IN7B_WIDTH / 8 + 1);
-    Height = EPD_2IN7B_HEIGHT;
-    
-    EPD_2IN7B_SendCommand(0x10);
-    for (UWORD j = 0; j < Height; j++) {
-        for (UWORD i = 0; i < Width; i++) {
-            EPD_2IN7B_SendData(~Imageblack[i + j * Width]);
-        }
-    }
-    EPD_2IN7B_SendCommand(0x11); // DATA_STOP
-    
-    EPD_2IN7B_SendCommand(0x13);
-    for (UWORD j = 0; j < Height; j++) {
-        for (UWORD i = 0; i < Width; i++) {
-            EPD_2IN7B_SendData(~Imagered[i + j * Width]);
-        }
-    }
-    EPD_2IN7B_SendCommand(0x11); // DATA_STOP
-    
-    EPD_2IN7B_SendCommand(0x12);
-    EPD_2IN7B_ReadBusy();
-}
-
-/******************************************************************************
-function :	Enter sleep mode
-parameter:
-******************************************************************************/
-void EPD_2IN7B_Sleep(void)
-{
-    EPD_2IN7B_SendCommand(0X50);
-    EPD_2IN7B_SendData(0xf7);
-    EPD_2IN7B_SendCommand(0X02); //power off
-    EPD_2IN7B_SendCommand(0X07); //deep sleep
-    EPD_2IN7B_SendData(0xA5);
-}

Jetson Nano/c/lib/e-Paper/EPD_2in9.c

@@ -1,296 +0,0 @@
-/*****************************************************************************
-* | File      	:  	EPD_2in9.c
-* | Author      :   Waveshare team
-* | Function    :   2.9inch e-paper
-* | Info        :
-*----------------
-* |	This version:   V3.0
-* | Date        :   2019-06-12
-* | Info        :
-* -----------------------------------------------------------------------------
-* V3.0(2019-06-12):
-* 1.Change:
-*    lut_full_update[] => EPD_2IN9_lut_full_update[]
-*    lut_partial_update[] => EPD_2IN9_lut_partial_update[] 
-*    EPD_Reset() => EPD_2IN9_Reset()
-*    EPD_SendCommand() => EPD_2IN9_SendCommand()
-*    EPD_SendData() => EPD_2IN9_SendData()
-*    EPD_WaitUntilIdle() => EPD_2IN9_ReadBusy()
-*    EPD_SetLut() => EPD_2IN9_SetLut()
-*    EPD_SetWindow() => EPD_2IN9_SetWindow()
-*    EPD_SetCursor() => EPD_2IN9_SetCursor()
-*    EPD_TurnOnDisplay() => EPD_2IN9_TurnOnDisplay()
-*    EPD_Init() => EPD_2IN9_Init()
-*    EPD_Clear() => EPD_2IN9_Clear()
-*    EPD_Display() => EPD_2IN9_Display()
-*    EPD_Sleep() => EPD_2IN9_Sleep()
-* 2.remove commands define:
-*    #define DRIVER_OUTPUT_CONTROL                       0x01
-*    #define BOOSTER_SOFT_START_CONTROL                  0x0C
-*    #define GATE_SCAN_START_POSITION                    0x0F
-*    #define DEEP_SLEEP_MODE                             0x10
-*    #define DATA_ENTRY_MODE_SETTING                     0x11
-*    #define SW_RESET                                    0x12
-*    #define TEMPERATURE_SENSOR_CONTROL                  0x1A
-*    #define MASTER_ACTIVATION                           0x20
-*    #define DISPLAY_UPDATE_CONTROL_1                    0x21
-*    #define DISPLAY_UPDATE_CONTROL_2                    0x22
-*    #define WRITE_RAM                                   0x24
-*    #define WRITE_VCOM_REGISTER                         0x2C
-*    #define WRITE_LUT_REGISTER                          0x32
-*    #define SET_DUMMY_LINE_PERIOD                       0x3A
-*    #define SET_GATE_TIME                               0x3B
-*    #define BORDER_WAVEFORM_CONTROL                     0x3C
-*    #define SET_RAM_X_ADDRESS_START_END_POSITION        0x44
-*    #define SET_RAM_Y_ADDRESS_START_END_POSITION        0x45
-*    #define SET_RAM_X_ADDRESS_COUNTER                   0x4E
-*    #define SET_RAM_Y_ADDRESS_COUNTER                   0x4F
-*    #define TERMINATE_FRAME_READ_WRITE                  0xFF
-* -----------------------------------------------------------------------------
-* V2.0(2018-11-06):
-* 1.Remove:ImageBuff[EPD_2IN9_HEIGHT * EPD_2IN9_WIDTH / 8]
-* 2.Change:EPD_Display(UBYTE *Image)
-*   Need to pass parameters: pointer to cached data
-* 3.Change:
-*   EPD_RST -> EPD_RST_PIN
-*   EPD_DC -> EPD_DC_PIN
-*   EPD_CS -> EPD_CS_PIN
-*   EPD_BUSY -> EPD_BUSY_PIN
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-******************************************************************************/
-#include "EPD_2in9.h"
-#include "Debug.h"
-
-const unsigned char EPD_2IN9_lut_full_update[] = {
-    0x50, 0xAA, 0x55, 0xAA, 0x11, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0xFF, 0xFF, 0x1F, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-const unsigned char EPD_2IN9_lut_partial_update[] = {
-    0x10, 0x18, 0x18, 0x08, 0x18, 0x18,
-    0x08, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x13, 0x14, 0x44, 0x12,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/******************************************************************************
-function :	Software reset
-parameter:
-******************************************************************************/
-static void EPD_2IN9_Reset(void)
-{
-    DEV_Digital_Write(EPD_RST_PIN, 1);
-    DEV_Delay_ms(200);
-    DEV_Digital_Write(EPD_RST_PIN, 0);
-    DEV_Delay_ms(200);
-    DEV_Digital_Write(EPD_RST_PIN, 1);
-    DEV_Delay_ms(200);
-}
-
-/******************************************************************************
-function :	send command
-parameter:
-     Reg : Command register
-******************************************************************************/
-static void EPD_2IN9_SendCommand(UBYTE Reg)
-{
-    DEV_Digital_Write(EPD_DC_PIN, 0);
-    DEV_Digital_Write(EPD_CS_PIN, 0);
-    DEV_SPI_WriteByte(Reg);
-    DEV_Digital_Write(EPD_CS_PIN, 1);
-}
-
-/******************************************************************************
-function :	send data
-parameter:
-    Data : Write data
-******************************************************************************/
-static void EPD_2IN9_SendData(UBYTE Data)
-{
-    DEV_Digital_Write(EPD_DC_PIN, 1);
-    DEV_Digital_Write(EPD_CS_PIN, 0);
-    DEV_SPI_WriteByte(Data);
-    DEV_Digital_Write(EPD_CS_PIN, 1);
-}
-
-/******************************************************************************
-function :	Wait until the busy_pin goes LOW
-parameter:
-******************************************************************************/
-void EPD_2IN9_ReadBusy(void)
-{
-    Debug("e-Paper busy\r\n");
-    while(DEV_Digital_Read(EPD_BUSY_PIN) == 1) {      //LOW: idle, HIGH: busy
-        DEV_Delay_ms(100);
-    }
-    Debug("e-Paper busy release\r\n");
-}
-
-/******************************************************************************
-function :	Setting the display window
-parameter:
-******************************************************************************/
-static void EPD_2IN9_SetWindows(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend)
-{
-    EPD_2IN9_SendCommand(0x44); // SET_RAM_X_ADDRESS_START_END_POSITION
-    EPD_2IN9_SendData((Xstart >> 3) & 0xFF);
-    EPD_2IN9_SendData((Xend >> 3) & 0xFF);
-
-    EPD_2IN9_SendCommand(0x45); // SET_RAM_Y_ADDRESS_START_END_POSITION
-    EPD_2IN9_SendData(Ystart & 0xFF);
-    EPD_2IN9_SendData((Ystart >> 8) & 0xFF);
-    EPD_2IN9_SendData(Yend & 0xFF);
-    EPD_2IN9_SendData((Yend >> 8) & 0xFF);
-}
-
-/******************************************************************************
-function :	Set Cursor
-parameter:
-******************************************************************************/
-static void EPD_2IN9_SetCursor(UWORD Xstart, UWORD Ystart)
-{
-    EPD_2IN9_SendCommand(0x4E); // SET_RAM_X_ADDRESS_COUNTER
-    EPD_2IN9_SendData((Xstart >> 3) & 0xFF);
-
-    EPD_2IN9_SendCommand(0x4F); // SET_RAM_Y_ADDRESS_COUNTER
-    EPD_2IN9_SendData(Ystart & 0xFF);
-    EPD_2IN9_SendData((Ystart >> 8) & 0xFF);
-}
-
-/******************************************************************************
-function :	Turn On Display
-parameter:
-******************************************************************************/
-static void EPD_2IN9_TurnOnDisplay(void)
-{
-    EPD_2IN9_SendCommand(0x22); // DISPLAY_UPDATE_CONTROL_2
-    EPD_2IN9_SendData(0xC4);
-    EPD_2IN9_SendCommand(0x20); // MASTER_ACTIVATION
-    EPD_2IN9_SendCommand(0xFF); // TERMINATE_FRAME_READ_WRITE
-
-    EPD_2IN9_ReadBusy();
-}
-
-/******************************************************************************
-function :	Initialize the e-Paper register
-parameter:
-******************************************************************************/
-void EPD_2IN9_Init(UBYTE Mode)
-{
-    EPD_2IN9_Reset();
-
-    EPD_2IN9_SendCommand(0x01); // DRIVER_OUTPUT_CONTROL
-    EPD_2IN9_SendData((EPD_2IN9_HEIGHT - 1) & 0xFF);
-    EPD_2IN9_SendData(((EPD_2IN9_HEIGHT - 1) >> 8) & 0xFF);
-    EPD_2IN9_SendData(0x00); // GD = 0; SM = 0; TB = 0;
-	
-    EPD_2IN9_SendCommand(0x0C); // BOOSTER_SOFT_START_CONTROL
-    EPD_2IN9_SendData(0xD7);
-    EPD_2IN9_SendData(0xD6);
-    EPD_2IN9_SendData(0x9D);
-	
-    EPD_2IN9_SendCommand(0x2C); // WRITE_VCOM_REGISTER
-    EPD_2IN9_SendData(0xA8); // VCOM 7C
-	
-    EPD_2IN9_SendCommand(0x3A); // SET_DUMMY_LINE_PERIOD
-    EPD_2IN9_SendData(0x1A); // 4 dummy lines per gate
-	
-    EPD_2IN9_SendCommand(0x3B); // SET_GATE_TIME
-    EPD_2IN9_SendData(0x08); // 2us per line
-	
-    EPD_2IN9_SendCommand(0x3C); // BORDER_WAVEFORM_CONTROL
-    EPD_2IN9_SendData(0x03);                     
-    EPD_2IN9_SendCommand(0x11); // DATA_ENTRY_MODE_SETTING
-    EPD_2IN9_SendData(0x03);
-
-    //set the look-up table register
-    EPD_2IN9_SendCommand(0x32); // WRITE_LUT_REGISTER
-    if(Mode == EPD_2IN9_FULL){
-        for (UWORD i = 0; i < 30; i++) {
-                EPD_2IN9_SendData(EPD_2IN9_lut_full_update[i]);
-        }
-    }else if(Mode == EPD_2IN9_PART){
-        for (UWORD i = 0; i < 30; i++) {
-                EPD_2IN9_SendData(EPD_2IN9_lut_partial_update[i]);
-        }
-    }else{
-        Debug("error, the Mode is EPD_2IN9_FULL or EPD_2IN9_PART");
-    }
-}
-
-/******************************************************************************
-function :	Clear screen
-parameter:
-******************************************************************************/
-void EPD_2IN9_Clear(void)
-{
-    UWORD Width, Height;
-    Width = (EPD_2IN9_WIDTH % 8 == 0)? (EPD_2IN9_WIDTH / 8 ): (EPD_2IN9_WIDTH / 8 + 1);
-    Height = EPD_2IN9_HEIGHT;
-    EPD_2IN9_SetWindows(0, 0, EPD_2IN9_WIDTH, EPD_2IN9_HEIGHT);
-    for (UWORD j = 0; j < Height; j++) {
-        EPD_2IN9_SetCursor(0, j);
-        EPD_2IN9_SendCommand(0x24);
-        for (UWORD i = 0; i < Width; i++) {
-            EPD_2IN9_SendData(0XFF);
-        }
-    }
-    EPD_2IN9_TurnOnDisplay();
-}
-
-/******************************************************************************
-function :	Sends the image buffer in RAM to e-Paper and displays
-parameter:
-******************************************************************************/
-void EPD_2IN9_Display(UBYTE *Image)
-{
-    UWORD Width, Height;
-    Width = (EPD_2IN9_WIDTH % 8 == 0)? (EPD_2IN9_WIDTH / 8 ): (EPD_2IN9_WIDTH / 8 + 1);
-    Height = EPD_2IN9_HEIGHT;
-
-    UDOUBLE Addr = 0;
-    // UDOUBLE Offset = ImageName;
-    EPD_2IN9_SetWindows(0, 0, EPD_2IN9_WIDTH, EPD_2IN9_HEIGHT);
-    for (UWORD j = 0; j < Height; j++) {
-        EPD_2IN9_SetCursor(0, j);
-        EPD_2IN9_SendCommand(0x24);
-        for (UWORD i = 0; i < Width; i++) {
-            Addr = i + j * Width;
-            EPD_2IN9_SendData(Image[Addr]);
-        }
-    }
-    EPD_2IN9_TurnOnDisplay();
-}
-
-/******************************************************************************
-function :	Enter sleep mode
-parameter:
-******************************************************************************/
-void EPD_2IN9_Sleep(void)
-{
-    EPD_2IN9_SendCommand(0x10);
-    EPD_2IN9_SendData(0x01);
-    // EPD_2IN9_ReadBusy();
-}

Jetson Nano/c/readme_CN.txt

@@ -1,86 +0,0 @@
-/*****************************************************************************
-* | File      	:   Readme_CN.txt
-* | Author      :   Waveshare team
-* | Function    :   Help with use
-* | Info        :
-*----------------
-* |	This version:   V1.0
-* | Date        :   2019-06-17
-* | Info        :   在这里提供一个中文版本的使用文档，以便你的快速使用
-******************************************************************************/
-这个文件是帮助您使用本例程。
-由于我们的墨水屏越来越多，不便于我们的维护，因此把所有的墨水屏程序做成一个工程。
-在这里简略的描述本工程的使用：
-
-1.基本信息：
-本例程是基于jetson-nano-sd-r32.1-2019-03-18系统镜像而开发的，由于目前的系统是没有硬件SPI的，
-目前采用模拟SPI进行开发的，因此墨水屏的刷新速度较慢;
-本例程是基于Jetson Nano进行开发的，例程均在Jetson Nano上进行了验证;
-本例程使用e-paper Driver HAT模块进行了验证，你可以在工程的Examples\中查看对应的测试例程;
-
-2.管脚连接：
-管脚连接你可以在\lib\Config目录下查看DEV_Config.h中查看，这里也再重述一次：
-EPD    =>    Jetson Nano/RPI(BCM)
-VCC    ->    3.3
-GND    ->    GND
-DIN    ->    10(SPI0_MOSI)
-CLK    ->    11(SPI0_SCK)
-CS     ->    8(SPI0_CS0)
-DC     ->    25
-RST    ->    17
-BUSY   ->    24
-
-3.基本使用：
-由于本工程是一个综合工程，对于使用而言，你可能需要阅读以下内容：
-你可以在main.c中的19行到43行看到已经进行了注释的19个函数，
-请注意你购买的是哪一款的墨水屏。
-栗子1：
-    如果你购买的5.83inch e-paper，那么你应该把对应的39行代码的注释去掉，即：
-        //		EPD_5in83_test();
-    修改成：
-        EPD_5in83_test();
-栗子2：
-    如果你购买的2.9inch e-paper (B)，由于2.9寸的B型和C型是公用的驱动代码，
-    那么你应该把对应的28行代码的注释去掉，即：
-        //		EPD_2in9bc_test();
-    修改成：
-        EPD_2in9bc_test();
-注意：对于EPD_1in54_V2_test()和EPD_2in13_V2_test()请注意你的屏幕背面是否贴有V2标识。
-
-然后你需要执行：make,编译程序，会生成可执行文件：epd
-运行：sudo ./epd
-如果修改了程序，需要执行：make clear,然后重新make。
-
-4.目录结构（选读）：
-如果你经常使用我们的产品，对我们的程序目录结构会十分熟悉，关于具体的函数的我们有一份
-函数的API手册，你可以在我们的WIKI上下载或像售后客服索取，这里简单介绍一次：
-\lib\Config\:此目录为硬件接口层文件，在DEV_Config.c(.h)可以看到很多定义，包括：
-    数据类型;
-    GPIO;
-    读写GPIO;
-    延时：注意：此延时函数并未使用示波器测量具体数值,因此会不准;
-    模块初始化与退出的处理：
-        void DEV_Module_Init(void);
-        void DEV_Module_Exit(void);
-        注意：1.这里是处理使用墨水屏前与使用完之后一些GPIO的处理。
-              2.对于PCB带有Rev2.1的，DEV_Module_Exit()之后整个模块会进入低功耗，经过测试这个功耗基本为0;
-              
-\lib\GUI\:此目录为一些基本的图像处理函数，在GUI_Paint.c(.h)中：
-    常用图像处理：创建图形、翻转图形、镜像图形、设置像素点、清屏等;
-    常用画图处理：画点、线、框、圆、中文字符、英文字符、数字等;
-    常用时间显示：提供一个常用的显示时间函数;
-    常用显示图片：提供一个显示位图的函数;
-    
-\lib\Fonts\:为一些常用的字体：
-    Ascii:
-        font8: 5*8 
-        font12: 7*12
-        font16: 11*16 
-        font20: 14*20 
-        font24: 17*24
-    中文：
-        font12CN: 16*21 
-        font24CN: 32*41
-        
-\lib\e-paper\:此目录下为墨水屏驱动函数;
-Examples\:此目录下为墨水屏的测试程序，你可在其中看到具体的使用方法;

Jetson Nano/python2/examples/epd_1in54_V2_test.py

@@ -1,87 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd1in54_V2
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd1in54_V2 Demo")
-    
-    epd = epd1in54_V2.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear(0xFF)
-    time.sleep(1)
-    
-    # Drawing on the image
-    print("1.Drawing on the image...")
-    image = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    
-    draw = ImageDraw.Draw(image)
-    font = ImageFont.truetype('../lib/Font.ttc', 24)
-    draw.rectangle((0, 10, 200, 34), fill = 0)
-    draw.text((8, 12), 'hello world', font = font, fill = 255)
-    draw.text((8, 36), u'微雪电子', font = font, fill = 0)
-    draw.line((16, 60, 56, 60), fill = 0)
-    draw.line((56, 60, 56, 110), fill = 0)
-    draw.line((16, 110, 56, 110), fill = 0)
-    draw.line((16, 110, 16, 60), fill = 0)
-    draw.line((16, 60, 56, 110), fill = 0)
-    draw.line((56, 60, 16, 110), fill = 0)
-    draw.arc((90, 60, 150, 120), 0, 360, fill = 0)
-    draw.rectangle((16, 130, 56, 180), fill = 0)
-    draw.chord((90, 130, 150, 190), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(image.rotate(90)))
-    time.sleep(2)
-    
-    # read bmp file 
-    print("2.read bmp file...")
-    image = Image.open('../pic/1in54.bmp')
-    epd.display(epd.getbuffer(image))
-    time.sleep(2)
-    
-    # read bmp file on window
-    print("3.read bmp file on window...")
-    epd.Clear(0xFF)
-    image1 = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    image1.paste(bmp, (50,50))    
-    epd.display(epd.getbuffer(image1))
-    time.sleep(2)
-    
-    # partial update
-    print("4.show time...")    
-    time_image = Image.new('1', (epd.width, epd.height), 255)
-    epd.displayPartBaseImage(epd.getbuffer(time_image))
-    
-    time_draw = ImageDraw.Draw(time_image)
-    num = 0
-    while (True):
-        time_draw.rectangle((10, 10, 120, 50), fill = 255)
-        time_draw.text((10, 10), time.strftime('%H:%M:%S'), font = font, fill = 0)
-        newimage = time_image.crop([10, 10, 120, 50])
-        time_image.paste(newimage, (10,10))  
-        epd.displayPart(epd.getbuffer(time_image))
-        num = num + 1
-        if(num == 10):
-            break
-    
-    print("Clear...")
-    epd.init()
-    epd.Clear(0xFF)
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_1in54_test.py

@@ -1,86 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd1in54
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd1in54 Demo")
-    
-    epd = epd1in54.EPD()
-    print("init and Clear")
-    epd.init(epd.lut_full_update)
-    epd.Clear(0xFF)
-    
-    # Drawing on the image
-    print("1.Drawing on the image...")
-    image = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    
-    draw = ImageDraw.Draw(image)
-    font = ImageFont.truetype('../lib/Font.ttc', 24)
-    draw.rectangle((0, 10, 200, 34), fill = 0)
-    draw.text((8, 12), 'hello world', font = font, fill = 255)
-    draw.text((8, 36), u'微雪电子', font = font, fill = 0)
-    draw.line((16, 60, 56, 60), fill = 0)
-    draw.line((56, 60, 56, 110), fill = 0)
-    draw.line((16, 110, 56, 110), fill = 0)
-    draw.line((16, 110, 16, 60), fill = 0)
-    draw.line((16, 60, 56, 110), fill = 0)
-    draw.line((56, 60, 16, 110), fill = 0)
-    draw.arc((90, 60, 150, 120), 0, 360, fill = 0)
-    draw.rectangle((16, 130, 56, 180), fill = 0)
-    draw.chord((90, 130, 150, 190), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(image.rotate(90)))
-    time.sleep(2)
-    
-    # read bmp file 
-    print("2.read bmp file...")
-    image = Image.open('../pic/1in54.bmp')
-    epd.display(epd.getbuffer(image))
-    time.sleep(2)
-    
-    # read bmp file on window
-    print("3.read bmp file on window...")
-    epd.Clear(0xFF)
-    image1 = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    image1.paste(bmp, (50,50))    
-    epd.display(epd.getbuffer(image1))
-    time.sleep(2)
-    
-    # # partial update
-    print("4.show time...")
-    epd.init(epd.lut_partial_update)    
-    epd.Clear(0xFF)
-    
-    time_image = Image.new('1', (epd.width, epd.height), 255)
-    time_draw = ImageDraw.Draw(time_image)
-    num = 0
-    while (True):
-        time_draw.rectangle((10, 10, 120, 50), fill = 255)
-        time_draw.text((10, 10), time.strftime('%H:%M:%S'), font = font, fill = 0)
-        newimage = time_image.crop([10, 10, 120, 50])
-        time_image.paste(newimage, (10,10))  
-        epd.display(epd.getbuffer(time_image))
-        num = num + 1
-        if(num == 10):
-            break
-    
-    print("Clear...")
-    epd.Clear(0xFF)
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in13_V2_test.py

@@ -1,89 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in13_V2
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in13_V2 Demo")
-    
-    epd = epd2in13_V2.EPD()
-    print("init and Clear")
-    epd.init(epd.FULL_UPDATE)
-    epd.Clear(0xFF)
-    
-    # Drawing on the image
-    font15 = ImageFont.truetype('../lib/Font.ttc', 15)
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    
-    print("1.Drawing on the image...")
-    image = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame    
-    draw = ImageDraw.Draw(image)
-    
-    draw.rectangle([(0,0),(50,50)],outline = 0)
-    draw.rectangle([(55,0),(100,50)],fill = 0)
-    draw.line([(0,0),(50,50)], fill = 0,width = 1)
-    draw.line([(0,50),(50,0)], fill = 0,width = 1)
-    draw.chord((10, 60, 50, 100), 0, 360, fill = 0)
-    draw.ellipse((55, 60, 95, 100), outline = 0)
-    draw.pieslice((55, 60, 95, 100), 90, 180, outline = 0)
-    draw.pieslice((55, 60, 95, 100), 270, 360, fill = 0)
-    draw.polygon([(110,0),(110,50),(150,25)],outline = 0)
-    draw.polygon([(190,0),(190,50),(150,25)],fill = 0)
-    draw.text((120, 60), 'e-Paper demo', font = font15, fill = 0)
-    draw.text((110, 90), u'微雪电子', font = font24, fill = 0)
-    epd.display(epd.getbuffer(image))
-    time.sleep(2)
-    
-    # read bmp file 
-    print("2.read bmp file...")
-    image = Image.open('../pic/2in13.bmp')
-    epd.display(epd.getbuffer(image))
-    time.sleep(2)
-    
-    # read bmp file on window
-    print("3.read bmp file on window...")
-    # epd.Clear(0xFF)
-    image1 = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    image1.paste(bmp, (2,2))    
-    epd.display(epd.getbuffer(image1))
-    time.sleep(2)
-    
-    # # partial update
-    print("4.show time...")
-    time_image = Image.new('1', (epd.height, epd.width), 255)
-    time_draw = ImageDraw.Draw(time_image)
-    
-    epd.init(epd.FULL_UPDATE)
-    epd.displayPartBaseImage(epd.getbuffer(time_image))
-    
-    epd.init(epd.PART_UPDATE)
-    num = 0
-    while (True):
-        time_draw.rectangle((120, 80, 220, 105), fill = 255)
-        time_draw.text((120, 80), time.strftime('%H:%M:%S'), font = font24, fill = 0)
-        epd.displayPartial(epd.getbuffer(time_image))
-        num = num + 1
-        if(num == 10):
-            break
-    
-    print("Clear...")
-    epd.init(epd.FULL_UPDATE)
-    epd.Clear(0xFF)
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in13_test.py

@@ -1,87 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in13
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in13 Demo")
-    
-    epd = epd2in13.EPD()
-    print("init and Clear")
-    epd.init(epd.lut_full_update)
-    epd.Clear(0xFF)
-    
-    # Drawing on the image
-    font15 = ImageFont.truetype('../lib/Font.ttc', 15)
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    
-    print("1.Drawing on the image...")
-    image = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame    
-    draw = ImageDraw.Draw(image)
-    
-    draw.rectangle([(0,0),(50,50)],outline = 0)
-    draw.rectangle([(55,0),(100,50)],fill = 0)
-    draw.line([(0,0),(50,50)], fill = 0,width = 1)
-    draw.line([(0,50),(50,0)], fill = 0,width = 1)
-    draw.chord((10, 60, 50, 100), 0, 360, fill = 0)
-    draw.ellipse((55, 60, 95, 100), outline = 0)
-    draw.pieslice((55, 60, 95, 100), 90, 180, outline = 0)
-    draw.pieslice((55, 60, 95, 100), 270, 360, fill = 0)
-    draw.polygon([(110,0),(110,50),(150,25)],outline = 0)
-    draw.polygon([(190,0),(190,50),(150,25)],fill = 0)
-    draw.text((120, 60), 'e-Paper demo', font = font15, fill = 0)
-    draw.text((110, 90), u'微雪电子', font = font24, fill = 0)
-    epd.display(epd.getbuffer(image))
-    time.sleep(2)
-    
-    # read bmp file 
-    print("2.read bmp file...")
-    image = Image.open('../pic/2in13.bmp')
-    epd.display(epd.getbuffer(image))
-    time.sleep(2)
-    
-    # read bmp file on window
-    print("3.read bmp file on window...")
-    # epd.Clear(0xFF)
-    image1 = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    image1.paste(bmp, (2,2))    
-    epd.display(epd.getbuffer(image1))
-    time.sleep(2)
-    
-    # # partial update
-    print("4.show time...")
-    epd.init(epd.lut_partial_update)    
-    epd.Clear(0xFF)
-    
-    time_image = Image.new('1', (epd.height, epd.width), 255)
-    time_draw = ImageDraw.Draw(time_image)
-    num = 0
-    while (True):
-        time_draw.rectangle((120, 80, 220, 105), fill = 255)
-        time_draw.text((120, 80), time.strftime('%H:%M:%S'), font = font24, fill = 0)
-        epd.display(epd.getbuffer(time_image))
-        num = num + 1
-        if(num == 10):
-            break
-    
-    print("Clear...")
-    epd.init(epd.lut_full_update)
-    epd.Clear(0xFF)
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in13bc_test.py

@@ -1,91 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in13bc
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in13bc Demo")
-    
-    epd = epd2in13bc.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear()
-    time.sleep(1)
-    
-    # Drawing on the image
-    print("Drawing")    
-    font20 = ImageFont.truetype('../lib/Font.ttc', 20)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...") 
-    HBlackimage = Image.new('1', (epd.height, epd.width), 255)  # 298*126
-    HRYimage = Image.new('1', (epd.height, epd.width), 255)  # 298*126  ryimage: red or yellow image  
-    drawblack = ImageDraw.Draw(HBlackimage)
-    drawry = ImageDraw.Draw(HRYimage)
-    drawblack.text((10, 0), 'hello world', font = font20, fill = 0)
-    drawblack.text((10, 20), '2.13inch e-Paper bc', font = font20, fill = 0)
-    drawblack.text((120, 0), u'微雪电子', font = font20, fill = 0)    
-    drawblack.line((20, 50, 70, 100), fill = 0)
-    drawblack.line((70, 50, 20, 100), fill = 0)
-    drawblack.rectangle((20, 50, 70, 100), outline = 0)    
-    drawry.line((165, 50, 165, 100), fill = 0)
-    drawry.line((140, 75, 190, 75), fill = 0)
-    drawry.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    drawry.rectangle((80, 50, 130, 100), fill = 0)
-    drawry.chord((85, 55, 125, 95), 0, 360, fill =1)
-    epd.display(epd.getbuffer(HBlackimage), epd.getbuffer(HRYimage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    LBlackimage = Image.new('1', (epd.width, epd.height), 255)  # 126*298
-    LRYimage = Image.new('1', (epd.width, epd.height), 255)  # 126*298
-    drawblack = ImageDraw.Draw(LBlackimage)
-    drawry = ImageDraw.Draw(LRYimage)
-    
-    drawblack.text((2, 0), 'hello world', font = font18, fill = 0)
-    drawblack.text((2, 20), '2.13 epd b', font = font18, fill = 0)
-    drawblack.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    drawblack.line((10, 90, 60, 140), fill = 0)
-    drawblack.line((60, 90, 10, 140), fill = 0)
-    drawblack.rectangle((10, 90, 60, 140), outline = 0)
-    drawry.rectangle((10, 150, 60, 200), fill = 0)
-    drawry.arc((15, 95, 55, 135), 0, 360, fill = 0)
-    drawry.chord((15, 155, 55, 195), 0, 360, fill =1)
-    epd.display(epd.getbuffer(LBlackimage), epd.getbuffer(LRYimage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    HBlackimage = Image.open('../pic/2in13bc-b.bmp')
-    HRYimage = Image.open('../pic/2in13bc-ry.bmp')
-    epd.display(epd.getbuffer(HBlackimage), epd.getbuffer(HRYimage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    blackimage1 = Image.new('1', (epd.height, epd.width), 255)  # 298*126
-    redimage1 = Image.new('1', (epd.height, epd.width), 255)  # 298*126    
-    newimage = Image.open('../pic/100x100.bmp')
-    blackimage1.paste(newimage, (10,10))    
-    epd.display(epd.getbuffer(blackimage1), epd.getbuffer(redimage1))
-    
-    print("Clear...")
-    epd.init()
-    epd.Clear()
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in13d_test.py

@@ -1,83 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in13d
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in13d Demo")
-    
-    epd = epd2in13d.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear(0xFF)
-    
-    font15 = ImageFont.truetype('../lib/Font.ttc', 15)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...")
-    Himage = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Himage)
-    draw.rectangle([(0,0),(50,50)],outline = 0)
-    draw.rectangle([(55,0),(100,50)],fill = 0)
-    draw.line([(0,0),(50,50)], fill = 0,width = 1)
-    draw.line([(0,50),(50,0)], fill = 0,width = 1)
-    draw.chord((10, 60, 50, 100), 0, 360, fill = 0)
-    draw.ellipse((55, 60, 95, 100), outline = 0)
-    draw.pieslice((55, 60, 95, 100), 90, 180, outline = 0)
-    draw.pieslice((55, 60, 95, 100), 270, 360, fill = 0)
-    draw.polygon([(110,0),(110,50),(150,25)],outline = 0)
-    draw.polygon([(190,0),(190,50),(150,25)],fill = 0)
-    draw.text((110, 60), 'e-Paper demo', font = font15, fill = 0)
-    draw.text((110, 80), u'微雪电子', font = font15, fill = 0)
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-        
-    print("3.read bmp file")
-    Himage = Image.open('../pic/2in13d.bmp')
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    Himage2 = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    Himage2.paste(bmp, (20,20))
-    epd.display(epd.getbuffer(Himage2))
-    time.sleep(2)
-    
-    # # partial update
-    print("5.show time...")
-    epd.init()    
-    epd.Clear(0xFF)
-    
-    time_image = Image.new('1', (epd.width, epd.height), 255)
-    time_draw = ImageDraw.Draw(time_image)
-    num = 0
-    while (True):
-        time_draw.rectangle((10, 10, 120, 50), fill = 255)
-        time_draw.text((10, 10), time.strftime('%H:%M:%S'), font = font24, fill = 0)
-        newimage = time_image.crop([10, 10, 120, 50])
-        time_image.paste(newimage, (10,10))  
-        epd.DisplayPartial(epd.getbuffer(time_image))
-        num = num + 1
-        if(num == 10):
-            break
-    
-    print("Clear...")
-    epd.Clear(0xFF)
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in7_test.py

@@ -1,81 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in7
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in7 Demo")
-    
-    epd = epd2in7.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear(0xFF)
-    
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...")
-    Himage = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Himage)
-    draw.text((10, 0), 'hello world', font = font24, fill = 0)
-    draw.text((150, 0), u'微雪电子', font = font24, fill = 0)    
-    draw.line((20, 50, 70, 100), fill = 0)
-    draw.line((70, 50, 20, 100), fill = 0)
-    draw.rectangle((20, 50, 70, 100), outline = 0)
-    draw.line((165, 50, 165, 100), fill = 0)
-    draw.line((140, 75, 190, 75), fill = 0)
-    draw.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    draw.rectangle((80, 50, 130, 100), fill = 0)
-    draw.chord((200, 50, 250, 100), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    Limage = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Limage)
-    draw.text((2, 0), 'hello world', font = font18, fill = 0)
-    draw.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    draw.line((10, 90, 60, 140), fill = 0)
-    draw.line((60, 90, 10, 140), fill = 0)
-    draw.rectangle((10, 90, 60, 140), outline = 0)
-    draw.line((95, 90, 95, 140), fill = 0)
-    draw.line((70, 115, 120, 115), fill = 0)
-    draw.arc((70, 90, 120, 140), 0, 360, fill = 0)
-    draw.rectangle((10, 150, 60, 200), fill = 0)
-    draw.chord((70, 150, 120, 200), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Limage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    Himage = Image.open('../pic/2in7.bmp')
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    Himage2 = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    Himage2.paste(bmp, (50,10))
-    epd.display(epd.getbuffer(Himage2))
-    time.sleep(2)
-        
-    print("Clear...")
-    epd.Clear(0xFF)
-    
-    print("Goto Sleep...")
-    epd.sleep()
-    
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in7b_test.py

@@ -1,98 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in7b
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in7b Demo")
-    
-    epd = epd2in7b.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear()
-    time.sleep(1)
-    
-    # Drawing on the image
-    print("Drawing")
-    blackimage = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    redimage = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...")
-    HBlackimage = Image.new('1', (epd.height, epd.width), 255)  # 298*126
-    HRedimage = Image.new('1', (epd.height, epd.width), 255)  # 298*126    
-    
-    drawblack = ImageDraw.Draw(HBlackimage)
-    drawred = ImageDraw.Draw(HRedimage)
-    drawblack.text((10, 0), 'hello world', font = font24, fill = 0)
-    drawblack.text((10, 20), '2.9inch e-Paper', font = font24, fill = 0)
-    drawblack.text((150, 0), u'微雪电子', font = font24, fill = 0)    
-    drawblack.line((20, 50, 70, 100), fill = 0)
-    drawblack.line((70, 50, 20, 100), fill = 0)
-    drawblack.rectangle((20, 50, 70, 100), outline = 0)    
-    drawred.line((165, 50, 165, 100), fill = 0)
-    drawred.line((140, 75, 190, 75), fill = 0)
-    drawred.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    drawred.rectangle((80, 50, 130, 100), fill = 0)
-    drawred.chord((200, 50, 250, 100), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(HBlackimage), epd.getbuffer(HRedimage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    LBlackimage = Image.new('1', (epd.width, epd.height), 255)  # 126*298
-    LRedimage = Image.new('1', (epd.width, epd.height), 255)  # 126*298
-    drawblack = ImageDraw.Draw(LBlackimage)
-    drawred = ImageDraw.Draw(LRedimage)
-    
-    drawblack.text((2, 0), 'hello world', font = font18, fill = 0)
-    drawblack.text((2, 20), '2.9inch epd', font = font18, fill = 0)
-    drawblack.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    drawblack.line((10, 90, 60, 140), fill = 0)
-    drawblack.line((60, 90, 10, 140), fill = 0)
-    drawblack.rectangle((10, 90, 60, 140), outline = 0)
-    drawred.line((95, 90, 95, 140), fill = 0)
-    drawred.line((70, 115, 120, 115), fill = 0)
-    drawred.arc((70, 90, 120, 140), 0, 360, fill = 0)
-    drawred.rectangle((10, 150, 60, 200), fill = 0)
-    drawred.chord((70, 150, 120, 200), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(LBlackimage), epd.getbuffer(LRedimage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    HBlackimage = Image.open('../pic/2in7b-b.bmp')
-    HRedimage = Image.open('../pic/2in7b-r.bmp')
-    epd.display(epd.getbuffer(HBlackimage), epd.getbuffer(HRedimage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    blackimage1 = Image.new('1', (epd.height, epd.width), 255)  # 298*126
-    redimage1 = Image.new('1', (epd.height, epd.width), 255)  # 298*126    
-    newimage = Image.open('../pic/100x100.bmp')
-    blackimage1.paste(newimage, (50,10))    
-    epd.display(epd.getbuffer(blackimage1), epd.getbuffer(redimage1))
-    
-    print("Clear...")
-    epd.init()
-    epd.Clear()
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in9_test.py

@@ -1,102 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in9
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in9 Demo")
-    
-    epd = epd2in9.EPD()
-    print("init and Clear")
-    epd.init(epd.lut_full_update)
-    epd.Clear(0xFF)
-    
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...")
-    Himage = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Himage)
-    draw.text((10, 0), 'hello world', font = font24, fill = 0)
-    draw.text((10, 20), '2.9inch e-Paper', font = font24, fill = 0)
-    draw.text((150, 0), u'微雪电子', font = font24, fill = 0)    
-    draw.line((20, 50, 70, 100), fill = 0)
-    draw.line((70, 50, 20, 100), fill = 0)
-    draw.rectangle((20, 50, 70, 100), outline = 0)
-    draw.line((165, 50, 165, 100), fill = 0)
-    draw.line((140, 75, 190, 75), fill = 0)
-    draw.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    draw.rectangle((80, 50, 130, 100), fill = 0)
-    draw.chord((200, 50, 250, 100), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    Limage = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Limage)
-    draw.text((2, 0), 'hello world', font = font18, fill = 0)
-    draw.text((2, 20), '2.9inch epd', font = font18, fill = 0)
-    draw.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    draw.line((10, 90, 60, 140), fill = 0)
-    draw.line((60, 90, 10, 140), fill = 0)
-    draw.rectangle((10, 90, 60, 140), outline = 0)
-    draw.line((95, 90, 95, 140), fill = 0)
-    draw.line((70, 115, 120, 115), fill = 0)
-    draw.arc((70, 90, 120, 140), 0, 360, fill = 0)
-    draw.rectangle((10, 150, 60, 200), fill = 0)
-    draw.chord((70, 150, 120, 200), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Limage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    Himage = Image.open('../pic/2in9.bmp')
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    Himage2 = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    Himage2.paste(bmp, (50,10))
-    epd.display(epd.getbuffer(Himage2))
-    time.sleep(2)
-    
-    # partial update
-    print("5.show time")
-    epd.init(epd.lut_partial_update)    
-    epd.Clear(0xFF)
-    time_image = Image.new('1', (epd.height, epd.width), 255)
-    time_draw = ImageDraw.Draw(time_image)
-    num = 0
-    while (True):
-        time_draw.rectangle((10, 10, 120, 50), fill = 255)
-        time_draw.text((10, 10), time.strftime('%H:%M:%S'), font = font24, fill = 0)
-        newimage = time_image.crop([10, 10, 120, 50])
-        time_image.paste(newimage, (10,10))  
-        epd.display(epd.getbuffer(time_image))
-        
-        num = num + 1
-        if(num == 10):
-            break
-            
-    print("Clear...")
-    epd.init(epd.lut_full_update)
-    epd.Clear(0xFF)
-    
-    print("Goto Sleep...")
-    epd.sleep()
-    
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in9bc_test.py

@@ -1,93 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in9bc
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in9bc Demo")
-    
-    epd = epd2in9bc.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear()
-    time.sleep(1)
-    
-    # Drawing on the image
-    print("Drawing")    
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...") 
-    HBlackimage = Image.new('1', (epd.height, epd.width), 255)  # 298*126
-    HRYimage = Image.new('1', (epd.height, epd.width), 255)  # 298*126  ryimage: red or yellow image  
-    drawblack = ImageDraw.Draw(HBlackimage)
-    drawry = ImageDraw.Draw(HRYimage)
-    drawblack.text((10, 0), 'hello world', font = font24, fill = 0)
-    drawblack.text((10, 20), '2.9inch e-Paper bc', font = font24, fill = 0)
-    drawblack.text((150, 0), u'微雪电子', font = font24, fill = 0)    
-    drawblack.line((20, 50, 70, 100), fill = 0)
-    drawblack.line((70, 50, 20, 100), fill = 0)
-    drawblack.rectangle((20, 50, 70, 100), outline = 0)    
-    drawry.line((165, 50, 165, 100), fill = 0)
-    drawry.line((140, 75, 190, 75), fill = 0)
-    drawry.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    drawry.rectangle((80, 50, 130, 100), fill = 0)
-    drawry.chord((200, 50, 250, 100), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(HBlackimage), epd.getbuffer(HRYimage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    LBlackimage = Image.new('1', (epd.width, epd.height), 255)  # 126*298
-    LRYimage = Image.new('1', (epd.width, epd.height), 255)  # 126*298
-    drawblack = ImageDraw.Draw(LBlackimage)
-    drawry = ImageDraw.Draw(LRYimage)
-    
-    drawblack.text((2, 0), 'hello world', font = font18, fill = 0)
-    drawblack.text((2, 20), '2.9inch epd bc', font = font18, fill = 0)
-    drawblack.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    drawblack.line((10, 90, 60, 140), fill = 0)
-    drawblack.line((60, 90, 10, 140), fill = 0)
-    drawblack.rectangle((10, 90, 60, 140), outline = 0)
-    drawry.line((95, 90, 95, 140), fill = 0)
-    drawry.line((70, 115, 120, 115), fill = 0)
-    drawry.arc((70, 90, 120, 140), 0, 360, fill = 0)
-    drawry.rectangle((10, 150, 60, 200), fill = 0)
-    drawry.chord((70, 150, 120, 200), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(LBlackimage), epd.getbuffer(LRYimage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    HBlackimage = Image.open('../pic/2in9bc-b.bmp')
-    HRYimage = Image.open('../pic/2in9bc-ry.bmp')
-    epd.display(epd.getbuffer(HBlackimage), epd.getbuffer(HRYimage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    blackimage1 = Image.new('1', (epd.height, epd.width), 255)  # 298*126
-    redimage1 = Image.new('1', (epd.height, epd.width), 255)  # 298*126    
-    newimage = Image.open('../pic/100x100.bmp')
-    blackimage1.paste(newimage, (50,10))    
-    epd.display(epd.getbuffer(blackimage1), epd.getbuffer(redimage1))
-    
-    print("Clear...")
-    epd.init()
-    epd.Clear()
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_2in9d_test.py

@@ -1,101 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd2in9d
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd2in9d Demo")
-    
-    epd = epd2in9d.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear(0xFF)
-    
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...")
-    Himage = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Himage)
-    draw.text((10, 0), 'hello world', font = font24, fill = 0)
-    draw.text((10, 20), '2.9inch e-Paper d', font = font24, fill = 0)
-    draw.text((150, 0), u'微雪电子', font = font24, fill = 0)    
-    draw.line((20, 50, 70, 100), fill = 0)
-    draw.line((70, 50, 20, 100), fill = 0)
-    draw.rectangle((20, 50, 70, 100), outline = 0)
-    draw.line((165, 50, 165, 100), fill = 0)
-    draw.line((140, 75, 190, 75), fill = 0)
-    draw.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    draw.rectangle((80, 50, 130, 100), fill = 0)
-    draw.chord((200, 50, 250, 100), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    Limage = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Limage)
-    draw.text((2, 0), 'hello world', font = font18, fill = 0)
-    draw.text((2, 20), '2.9inch epd d', font = font18, fill = 0)
-    draw.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    draw.line((10, 90, 60, 140), fill = 0)
-    draw.line((60, 90, 10, 140), fill = 0)
-    draw.rectangle((10, 90, 60, 140), outline = 0)
-    draw.line((95, 90, 95, 140), fill = 0)
-    draw.line((70, 115, 120, 115), fill = 0)
-    draw.arc((70, 90, 120, 140), 0, 360, fill = 0)
-    draw.rectangle((10, 150, 60, 200), fill = 0)
-    draw.chord((70, 150, 120, 200), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Limage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    Himage = Image.open('../pic/2in9d.bmp')
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    Himage2 = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    Himage2.paste(bmp, (50,10))
-    epd.display(epd.getbuffer(Himage2))
-    time.sleep(2)
-    
-    # # partial update
-    print("5.show time...")
-    epd.init()    
-    epd.Clear(0xFF)
-    
-    time_image = Image.new('1', (epd.width, epd.height), 255)
-    time_draw = ImageDraw.Draw(time_image)
-    num = 0
-    while (True):
-        time_draw.rectangle((10, 10, 120, 50), fill = 255)
-        time_draw.text((10, 10), time.strftime('%H:%M:%S'), font = font24, fill = 0)
-        newimage = time_image.crop([10, 10, 120, 50])
-        time_image.paste(newimage, (10,10))  
-        epd.display(epd.getbuffer(time_image))
-        num = num + 1
-        if(num == 10):
-            break
-    
-    print("Clear...")
-    epd.Clear(0xFF)
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_4in2_test.py

@@ -1,84 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd4in2
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd4in2 Demo")
-    
-    epd = epd4in2.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear()
-    
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...")
-    Himage = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Himage)
-    draw.text((10, 0), 'hello world', font = font24, fill = 0)
-    draw.text((10, 20), '4.2inch e-Paper', font = font24, fill = 0)
-    draw.text((150, 0), u'微雪电子', font = font24, fill = 0)    
-    draw.line((20, 50, 70, 100), fill = 0)
-    draw.line((70, 50, 20, 100), fill = 0)
-    draw.rectangle((20, 50, 70, 100), outline = 0)
-    draw.line((165, 50, 165, 100), fill = 0)
-    draw.line((140, 75, 190, 75), fill = 0)
-    draw.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    draw.rectangle((80, 50, 130, 100), fill = 0)
-    draw.chord((200, 50, 250, 100), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    Limage = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Limage)
-    draw.text((2, 0), 'hello world', font = font18, fill = 0)
-    draw.text((2, 20), '4.2inch epd', font = font18, fill = 0)
-    draw.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    draw.line((10, 90, 60, 140), fill = 0)
-    draw.line((60, 90, 10, 140), fill = 0)
-    draw.rectangle((10, 90, 60, 140), outline = 0)
-    draw.line((95, 90, 95, 140), fill = 0)
-    draw.line((70, 115, 120, 115), fill = 0)
-    draw.arc((70, 90, 120, 140), 0, 360, fill = 0)
-    draw.rectangle((10, 150, 60, 200), fill = 0)
-    draw.chord((70, 150, 120, 200), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Limage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    Himage = Image.open('../pic/4in2.bmp')
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    Himage2 = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    Himage2.paste(bmp, (50,10))
-    epd.display(epd.getbuffer(Himage2))
-    time.sleep(2)
-
-    print("Clear...")
-    epd.init()
-    epd.Clear()
-    
-    print("Goto Sleep...")
-    epd.sleep()
-    
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_4in2bc_test.py

@@ -1,95 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd4in2bc
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd4in2bc Demo")
-    
-    epd = epd4in2bc.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear()
-    time.sleep(1)
-    
-    # Drawing on the image
-    print("Drawing")    
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...") 
-    HBlackimage = Image.new('1', (epd.width, epd.height), 255)  # 298*126
-    HRYimage = Image.new('1', (epd.width, epd.height), 255)  # 298*126  ryimage: red or yellow image  
-    drawblack = ImageDraw.Draw(HBlackimage)
-    drawry = ImageDraw.Draw(HRYimage)
-    drawblack.text((10, 0), 'hello world', font = font24, fill = 0)
-    drawblack.text((10, 20), '4.2inch e-Paper bc', font = font24, fill = 0)
-    drawblack.text((150, 0), u'微雪电子', font = font24, fill = 0)    
-    drawblack.line((20, 50, 70, 100), fill = 0)
-    drawblack.line((70, 50, 20, 100), fill = 0)
-    drawblack.rectangle((20, 50, 70, 100), outline = 0)    
-    drawry.line((165, 50, 165, 100), fill = 0)
-    drawry.line((140, 75, 190, 75), fill = 0)
-    drawry.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    drawry.rectangle((80, 50, 130, 100), fill = 0)
-    drawry.chord((200, 50, 250, 100), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(HBlackimage), epd.getbuffer(HRYimage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    LBlackimage = Image.new('1', (epd.height, epd.width), 255)  # 126*298
-    LRYimage = Image.new('1', (epd.height, epd.width), 255)  # 126*298
-    drawblack = ImageDraw.Draw(LBlackimage)
-    drawry = ImageDraw.Draw(LRYimage)
-    
-    drawblack.text((2, 0), 'hello world', font = font18, fill = 0)
-    drawblack.text((2, 20), '4.2inch epd bc', font = font18, fill = 0)
-    drawblack.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    drawblack.line((10, 90, 60, 140), fill = 0)
-    drawblack.line((60, 90, 10, 140), fill = 0)
-    drawblack.rectangle((10, 90, 60, 140), outline = 0)
-    drawry.line((95, 90, 95, 140), fill = 0)
-    drawry.line((70, 115, 120, 115), fill = 0)
-    drawry.arc((70, 90, 120, 140), 0, 360, fill = 0)
-    drawry.rectangle((10, 150, 60, 200), fill = 0)
-    drawry.chord((70, 150, 120, 200), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(LBlackimage), epd.getbuffer(LRYimage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    HBlackimage = Image.open('../pic/4in2b-b.bmp')
-    HRYimage = Image.open('../pic/4in2b-r.bmp')
-    # HBlackimage = Image.open('../pic/4in2c-b.bmp')
-    # HRYimage = Image.open('../pic/4in2c-y.bmp')
-    epd.display(epd.getbuffer(HBlackimage), epd.getbuffer(HRYimage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    blackimage1 = Image.new('1', (epd.width, epd.height), 255)  # 298*126
-    redimage1 = Image.new('1', (epd.width, epd.height), 255)  # 298*126    
-    newimage = Image.open('../pic/100x100.bmp')
-    blackimage1.paste(newimage, (50,10))    
-    epd.display(epd.getbuffer(blackimage1), epd.getbuffer(redimage1))
-    
-    print("Clear...")
-    epd.init()
-    epd.Clear()
-    
-    print("Goto Sleep...")
-    epd.sleep()
-        
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/examples/epd_7in5_test.py

@@ -1,84 +0,0 @@
-#!/usr/bin/python
-# -*- coding:utf-8 -*-
-import sys
-sys.path.append(r'../lib')
-
-import epd7in5
-import epdconfig
-import time
-from PIL import Image,ImageDraw,ImageFont
-import traceback
-
-try:
-    print("epd7in5 Demo")
-    
-    epd = epd7in5.EPD()
-    print("init and Clear")
-    epd.init()
-    epd.Clear()
-    
-    font24 = ImageFont.truetype('../lib/Font.ttc', 24)
-    font18 = ImageFont.truetype('../lib/Font.ttc', 18)
-    
-    # Drawing on the Horizontal image
-    print("1.Drawing on the Horizontal image...")
-    Himage = Image.new('1', (epd.width, epd.height), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Himage)
-    draw.text((10, 0), 'hello world', font = font24, fill = 0)
-    draw.text((10, 20), '7.5inch e-Paper', font = font24, fill = 0)
-    draw.text((150, 0), u'微雪电子', font = font24, fill = 0)    
-    draw.line((20, 50, 70, 100), fill = 0)
-    draw.line((70, 50, 20, 100), fill = 0)
-    draw.rectangle((20, 50, 70, 100), outline = 0)
-    draw.line((165, 50, 165, 100), fill = 0)
-    draw.line((140, 75, 190, 75), fill = 0)
-    draw.arc((140, 50, 190, 100), 0, 360, fill = 0)
-    draw.rectangle((80, 50, 130, 100), fill = 0)
-    draw.chord((200, 50, 250, 100), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    # Drawing on the Vertical image
-    print("2.Drawing on the Vertical image...")
-    Limage = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    draw = ImageDraw.Draw(Limage)
-    draw.text((2, 0), 'hello world', font = font18, fill = 0)
-    draw.text((2, 20), '7.5inch epd', font = font18, fill = 0)
-    draw.text((20, 50), u'微雪电子', font = font18, fill = 0)
-    draw.line((10, 90, 60, 140), fill = 0)
-    draw.line((60, 90, 10, 140), fill = 0)
-    draw.rectangle((10, 90, 60, 140), outline = 0)
-    draw.line((95, 90, 95, 140), fill = 0)
-    draw.line((70, 115, 120, 115), fill = 0)
-    draw.arc((70, 90, 120, 140), 0, 360, fill = 0)
-    draw.rectangle((10, 150, 60, 200), fill = 0)
-    draw.chord((70, 150, 120, 200), 0, 360, fill = 0)
-    epd.display(epd.getbuffer(Limage))
-    time.sleep(2)
-    
-    print("3.read bmp file")
-    Himage = Image.open('../pic/7in5.bmp')
-    epd.display(epd.getbuffer(Himage))
-    time.sleep(2)
-    
-    print("4.read bmp file on window")
-    Himage2 = Image.new('1', (epd.height, epd.width), 255)  # 255: clear the frame
-    bmp = Image.open('../pic/100x100.bmp')
-    Himage2.paste(bmp, (50,10))
-    epd.display(epd.getbuffer(Himage2))
-    time.sleep(2)
-
-    print("Clear...")
-    epd.init()
-    epd.Clear()
-    
-    print("Goto Sleep...")
-    epd.sleep()
-    
-except IOError as e:
-    print(e)
-    
-except KeyboardInterrupt:    
-    print("ctrl + c:")
-    epdconfig.module_exit()
-    exit()

Jetson Nano/python2/lib/epd1in54.py

@@ -1,254 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epd1in54.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V3.1
-# * | Date        :   2019-06-18
-# # | Info        :   python2 demo
-# -----------------------------------------------------------------------------
-# V3.1(2019-06-18):
-# 2.remove commands define:
-#   #define PANEL_SETTING                               0x00
-#   #define POWER_SETTING                               0x01
-#   #define POWER_OFF                                   0x02
-#   #define POWER_OFF_SEQUENCE_SETTING                  0x03
-#   #define POWER_ON                                    0x04
-#   #define POWER_ON_MEASURE                            0x05
-#   #define BOOSTER_SOFT_START                          0x06
-#   #define DEEP_SLEEP                                  0x07
-#   #define DATA_START_TRANSMISSION_1                   0x10
-#   #define DATA_STOP                                   0x11
-#   #define DISPLAY_REFRESH                             0x12
-#   #define DATA_START_TRANSMISSION_2                   0x13
-#   #define PLL_CONTROL                                 0x30
-#   #define TEMPERATURE_SENSOR_COMMAND                  0x40
-#   #define TEMPERATURE_SENSOR_CALIBRATION              0x41
-#   #define TEMPERATURE_SENSOR_WRITE                    0x42
-#   #define TEMPERATURE_SENSOR_READ                     0x43
-#   #define VCOM_AND_DATA_INTERVAL_SETTING              0x50
-#   #define LOW_POWER_DETECTION                         0x51
-#   #define TCON_SETTING                                0x60
-#   #define TCON_RESOLUTION                             0x61
-#   #define SOURCE_AND_GATE_START_SETTING               0x62
-#   #define GET_STATUS                                  0x71
-#   #define AUTO_MEASURE_VCOM                           0x80
-#   #define VCOM_VALUE                                  0x81
-#   #define VCM_DC_SETTING_REGISTER                     0x82
-#   #define PROGRAM_MODE                                0xA0
-#   #define ACTIVE_PROGRAM                              0xA1
-#   #define READ_OTP_DATA                               0xA2
-# -----------------------------------------------------------------------------
-# V3.0(2018-11-01):
-# # 1.Remove:
-#   digital_write(self, pin, value)
-#   digital_read(self, pin)
-#   delay_ms(self, delaytime)
-#   set_lut(self, lut)
-#   self.lut = self.lut_full_update
-# * 2.Change:
-#   display_frame -> TurnOnDisplay
-#   set_memory_area -> SetWindow
-#   set_memory_pointer -> SetCursor
-# * 3.How to use
-#   epd = epd1in54.EPD()
-#   epd.init(epd.lut_full_update)
-#   image = Image.new('1', (epd1in54.EPD_WIDTH, epd1in54.EPD_HEIGHT), 255)
-#   ...
-#   drawing ......
-#   ...
-#   epd.display(getbuffer(image))
-# ******************************************************************************/
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-import epdconfig
-
-# Display resolution
-EPD_WIDTH       = 200
-EPD_HEIGHT      = 200
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    lut_full_update = [
-        0x02, 0x02, 0x01, 0x11, 0x12, 0x12, 0x22, 0x22, 
-        0x66, 0x69, 0x69, 0x59, 0x58, 0x99, 0x99, 0x88, 
-        0x00, 0x00, 0x00, 0x00, 0xF8, 0xB4, 0x13, 0x51, 
-        0x35, 0x51, 0x51, 0x19, 0x01, 0x00
-    ]
-
-    lut_partial_update  = [
-        0x10, 0x18, 0x18, 0x08, 0x18, 0x18, 0x08, 0x00, 
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
-        0x00, 0x00, 0x00, 0x00, 0x13, 0x14, 0x44, 0x12, 
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    ]
-        
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200) 
-        epdconfig.digital_write(self.reset_pin, 0)         # module reset
-        epdconfig.delay_ms(10)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200)   
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_data(self, data):
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-        
-    def ReadBusy(self):
-        print("e-Paper busy")
-        while(epdconfig.digital_read(self.busy_pin) == 1):      # 0: idle, 1: busy
-            epdconfig.delay_ms(100)
-        print("e-Paper busy release")
-
-    def TurnOnDisplay(self):
-        self.send_command(0x22) # DISPLAY_UPDATE_CONTROL_2
-        self.send_data(0xC4)
-        self.send_command(0x20) # MASTER_ACTIVATION
-        self.send_command(0xFF) # TERMINATE_FRAME_READ_WRITE
-        
-        self.ReadBusy()
-
-    def SetWindow(self, x_start, y_start, x_end, y_end):
-        self.send_command(0x44) # SET_RAM_X_ADDRESS_START_END_POSITION
-        # x point must be the multiple of 8 or the last 3 bits will be ignored
-        self.send_data((x_start >> 3) & 0xFF)
-        self.send_data((x_end >> 3) & 0xFF)
-        self.send_command(0x45) # SET_RAM_Y_ADDRESS_START_END_POSITION
-        self.send_data(y_start & 0xFF)
-        self.send_data((y_start >> 8) & 0xFF)
-        self.send_data(y_end & 0xFF)
-        self.send_data((y_end >> 8) & 0xFF)
-
-    def SetCursor(self, x, y):
-        self.send_command(0x4E) # SET_RAM_X_ADDRESS_COUNTER
-        # x point must be the multiple of 8 or the last 3 bits will be ignored
-        self.send_data((x >> 3) & 0xFF)
-        
-        self.send_command(0x4F) # SET_RAM_Y_ADDRESS_COUNTER
-        self.send_data(y & 0xFF)
-        self.send_data((y >> 8) & 0xFF)
-        # self.ReadBusy()
-        
-    def init(self, lut):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-        
-        self.send_command(0x01) # DRIVER_OUTPUT_CONTROL
-        self.send_data((EPD_HEIGHT - 1) & 0xFF)
-        self.send_data(((EPD_HEIGHT - 1) >> 8) & 0xFF)
-        self.send_data(0x00) # GD = 0 SM = 0 TB = 0
-        
-        self.send_command(0x0C) # BOOSTER_SOFT_START_CONTROL
-        self.send_data(0xD7)
-        self.send_data(0xD6)
-        self.send_data(0x9D)
-        
-        self.send_command(0x2C) # WRITE_VCOM_REGISTER
-        self.send_data(0xA8) # VCOM 7C
-        
-        self.send_command(0x3A) # SET_DUMMY_LINE_PERIOD
-        self.send_data(0x1A) # 4 dummy lines per gate
-        
-        self.send_command(0x3B) # SET_GATE_TIME
-        self.send_data(0x08) # 2us per line
-        
-        self.send_command(0x11) # DATA_ENTRY_MODE_SETTING
-        self.send_data(0x03) # X increment Y increment
-        
-        # set the look-up table register
-        self.send_command(0x32)
-        for i in range(0, len(lut)):
-            self.send_data(lut[i])
-        # EPD hardware init end
-        return 0
-
-    def getbuffer(self, image):
-        buf = [0xFF] * ((self.width/8) * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-        if(imwidth == self.width and imheight == self.height):
-            print("Horizontal")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    # Set the bits for the column of pixels at the current position.
-                    if pixels[x, y] == 0:
-                        buf[(x + y * self.width) / 8] &= ~(0x80 >> (x % 8))
-        elif(imwidth == self.height and imheight == self.width):
-            print("Vertical")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        buf[(newx + newy*self.width) / 8] &= ~(0x80 >> (y % 8))
-        return buf
-
-    def display(self, image):
-        if (image == None):
-            return
-            
-        self.SetWindow(0, 0, self.width, self.height)
-        for j in range(0, self.height):
-            self.SetCursor(0, j)
-            self.send_command(0x24)
-            for i in range(0, self.width / 8):
-                self.send_data(image[i + j * (self.width / 8)])   
-        self.TurnOnDisplay()
-        
-    def Clear(self, color):
-        # self.SetWindow(0, 0, self.width - 1, self.height - 1)
-        # send the color data
-        self.SetWindow(0, 0, self.width, self.height)
-        for j in range(0, self.height):
-            self.SetCursor(0, j)
-            self.send_command(0x24)
-            for i in range(0, self.width / 8):
-                self.send_data(color)
-        self.TurnOnDisplay()
-
-    def sleep(self):
-        self.send_command(0x10) # DEEP_SLEEP_MODE
-        self.send_data(0x01)
-        
-        epdconfig.module_exit()
-
-### END OF FILE ###
-

Jetson Nano/python2/lib/epd1in54b.py

@@ -1,218 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epd1in54b.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V4.0
-# * | Date        :   2019-06-18
-# * | Info        :   python2 demo
-# ******************************************************************************
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-import epdconfig
-
-# Display resolution
-EPD_WIDTH       = 200
-EPD_HEIGHT      = 200
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    lut_vcom0 = [0x0E, 0x14, 0x01, 0x0A, 0x06, 0x04, 0x0A, 0x0A, 0x0F, 0x03, 0x03, 0x0C, 0x06, 0x0A, 0x00]
-    lut_w = [0x0E, 0x14, 0x01, 0x0A, 0x46, 0x04, 0x8A, 0x4A, 0x0F, 0x83, 0x43, 0x0C, 0x86, 0x0A, 0x04]
-    lut_b = [0x0E, 0x14, 0x01, 0x8A, 0x06, 0x04, 0x8A, 0x4A, 0x0F, 0x83, 0x43, 0x0C, 0x06, 0x4A, 0x04]
-    lut_g1 = [0x8E, 0x94, 0x01, 0x8A, 0x06, 0x04, 0x8A, 0x4A, 0x0F, 0x83, 0x43, 0x0C, 0x06, 0x0A, 0x04]
-    lut_g2 = [0x8E, 0x94, 0x01, 0x8A, 0x06, 0x04, 0x8A, 0x4A, 0x0F, 0x83, 0x43, 0x0C, 0x06, 0x0A, 0x04]
-    lut_vcom1 = [0x03, 0x1D, 0x01, 0x01, 0x08, 0x23, 0x37, 0x37, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00]
-    lut_red0 = [0x83, 0x5D, 0x01, 0x81, 0x48, 0x23, 0x77, 0x77, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00]
-    lut_red1 = [0x03, 0x1D, 0x01, 0x01, 0x08, 0x23, 0x37, 0x37, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00] 
-    
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200) 
-        epdconfig.digital_write(self.reset_pin, 0) # module reset
-        epdconfig.delay_ms(10)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200)   
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_data(self, data):
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-        
-    def ReadBusy(self):
-        print("e-Paper busy")
-        while(epdconfig.digital_read(self.busy_pin) == 0):
-            epdconfig.delay_ms(100)    
-        print("e-Paper busy release")
-      
-    def set_lut_bw(self):
-        self.send_command(0x20) # vcom
-        for count in range(0, 15):
-            self.send_data(self.lut_vcom0[count])
-        self.send_command(0x21) # ww --
-        for count in range(0, 15):
-            self.send_data(self.lut_w[count])
-        self.send_command(0x22) # bw r
-        for count in range(0, 15):
-            self.send_data(self.lut_b[count])
-        self.send_command(0x23) # wb w
-        for count in range(0, 15):
-            self.send_data(self.lut_g1[count])
-        self.send_command(0x24) # bb b
-        for count in range(0, 15):
-            self.send_data(self.lut_g2[count])
-
-    def set_lut_red(self):
-        self.send_command(0x25)
-        for count in range(0, 15):
-            self.send_data(self.lut_vcom1[count])
-        self.send_command(0x26)
-        for count in range(0, 15):
-            self.send_data(self.lut_red0[count])
-        self.send_command(0x27)
-        for count in range(0, 15):
-            self.send_data(self.lut_red1[count])
-            
-    def init(self):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-        
-        self.send_command(0x01) # POWER_SETTING
-        self.send_data(0x07)
-        self.send_data(0x00)
-        self.send_data(0x08)
-        self.send_data(0x00)
-        self.send_command(0x06) # BOOSTER_SOFT_START
-        self.send_data(0x07)
-        self.send_data(0x07)
-        self.send_data(0x07)
-        self.send_command(0x04) # POWER_ON
-
-        self.ReadBusy()
-
-        self.send_command(0X00) # PANEL_SETTING
-        self.send_data(0xCF)
-        self.send_command(0X50) # VCOM_AND_DATA_INTERVAL_SETTING
-        self.send_data(0x17)
-        self.send_command(0x30) # PLL_CONTROL
-        self.send_data(0x39)
-        self.send_command(0x61) # TCON_RESOLUTION set x and y
-        self.send_data(0xC8)
-        self.send_data(0x00)
-        self.send_data(0xC8)
-        self.send_command(0x82) # VCM_DC_SETTING_REGISTER
-        self.send_data(0x0E)
-        
-        self.set_lut_bw()
-        self.set_lut_red()
-        return 0
-
-    def getbuffer(self, image):
-        buf = [0xFF] * (self.width * self.height / 8)
-        # Set buffer to value of Python Imaging Library image.
-        # Image must be in mode 1.
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        if imwidth != self.width or imheight != self.height:
-            raise ValueError('Image must be same dimensions as display \
-                ({0}x{1}).' .format(self.width, self.height))
-
-        pixels = image_monocolor.load()
-        for y in range(self.height):
-            for x in range(self.width):
-                # Set the bits for the column of pixels at the current position.
-                if pixels[x, y] == 0:
-                    buf[(x + y * self.width) / 8] &= ~(0x80 >> (x % 8))
-        return buf
-
-    def display(self, blackimage, redimage):
-        # send black data
-        if (blackimage != None):
-            self.send_command(0x10) # DATA_START_TRANSMISSION_1
-            for i in range(0, self.width * self.height / 8):
-                temp = 0x00
-                for bit in range(0, 4):
-                    if (blackimage[i] & (0x80 >> bit) != 0):
-                        temp |= 0xC0 >> (bit * 2)
-                self.send_data(temp)  
-                temp = 0x00
-                for bit in range(4, 8):
-                    if (blackimage[i] & (0x80 >> bit) != 0):
-                        temp |= 0xC0 >> ((bit - 4) * 2)
-                self.send_data(temp)
-                
-        # send red data        
-        if (redimage != None):
-            self.send_command(0x13) # DATA_START_TRANSMISSION_2
-            for i in range(0, self.width * self.height / 8):
-                self.send_data(redimage[i])  
-
-        self.send_command(0x12) # DISPLAY_REFRESH
-        self.ReadBusy()
-
-    def Clear(self):
-        self.send_command(0x10) # DATA_START_TRANSMISSION_1
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0xFF)
-            self.send_data(0xFF)
-            
-        self.send_command(0x13) # DATA_START_TRANSMISSION_2
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0xFF)
-
-        self.send_command(0x12) # DISPLAY_REFRESH
-        self.ReadBusy()
-
-    def sleep(self):
-        self.send_command(0x50) # VCOM_AND_DATA_INTERVAL_SETTING
-        self.send_data(0x17)
-        self.send_command(0x82) # to solve Vcom drop 
-        self.send_data(0x00)        
-        self.send_command(0x01) # power setting      
-        self.send_data(0x02) # gate switch to external
-        self.send_data(0x00)
-        self.send_data(0x00) 
-        self.send_data(0x00) 
-        self.ReadBusy()
-        
-        self.send_command(0x02) # power off
-        
-        epdconfig.module_exit()
-
-### END OF FILE ###
-

Jetson Nano/python2/lib/epd1in54c.py

@@ -1,152 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epd1in54c.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V4.0
-# * | Date        :   2019-06-18
-# * | Info        :   python2 demo
-# ******************************************************************************
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-import epdconfig
-
-# Display resolution
-EPD_WIDTH       = 152
-EPD_HEIGHT      = 152
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-        
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(10) 
-        epdconfig.digital_write(self.reset_pin, 0)
-        epdconfig.delay_ms(1)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(10)   
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_data(self, data):        
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-        
-    def ReadBusy(self):
-        print("e-Paper busy")
-        while(epdconfig.digital_read(self.busy_pin) == 0):      #  0: idle, 1: busy
-            epdconfig.delay_ms(200)                
-        print("e-Paper busy release")
-     
-    def init(self):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-        
-        self.send_command(0x06) # boost soft start
-        self.send_data(0x17)
-        self.send_data(0x17)
-        self.send_data(0x17)
-        self.send_command(0x04) # power on
-        
-        self.ReadBusy()
-        
-        self.send_command(0x00) # panel setting
-        self.send_data(0x0f) # LUT from OTP,160x296
-        self.send_data(0x0d) # VCOM to 0V fast
-        
-        self.send_command(0x61) # resolution setting
-        self.send_data(0x98)
-        self.send_data(0x00)
-        self.send_data(0x98)
-        
-        self.send_command(0x50)
-        self.send_data(0x77)
-
-    def getbuffer(self, image):
-        buf = [0xFF] * ((self.width/8) * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-        if(imwidth == self.width and imheight == self.height):
-            print("Horizontal")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    #  Set the bits for the column of pixels at the current position.
-                    if pixels[x, y] == 0:
-                        buf[(x + y * self.width) / 8] &= ~(0x80 >> (x % 8))
-        elif(imwidth == self.height and imheight == self.width):
-            print("Vertical")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        buf[(newx + newy*self.width) / 8] &= ~(0x80 >> (y % 8))
-        return buf
-
-    def display(self, blackimage, yellowimage):
-        self.send_command(0x10)
-        print("blackimage")
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(blackimage[i])
-        self.send_command(0x13)
-        print("yellowimage")
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(yellowimage[i])
-            
-        self.send_command(0x12)
-        self.ReadBusy()
-        
-    def Clear(self):
-        self.send_command(0x10)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0xFF)            
-        self.send_command(0x13)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0xFF)
-            
-        self.send_command(0x12)
-        self.ReadBusy()
-
-    #  after this, call epd.init() to awaken the module
-    def sleep(self):
-        self.send_command(0X02)  #  power off
-        self.ReadBusy() 
-        self.send_command(0X07)  #  deep sleep
-        self.send_data(0xA5)
-        
-        epdconfig.module_exit()
-### END OF FILE ###
-

Jetson Nano/python2/lib/epd2in13.py

@@ -1,224 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epd2in13.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V4.0
-# * | Date        :   2019-06-19
-# * | Info        :   python2 demo
-# ******************************************************************************/
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-
-import epdconfig
-import numpy as np
-
-# Display resolution
-EPD_WIDTH       = 122
-EPD_HEIGHT      = 250
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-        
-    lut_full_update = [
-        0x22, 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x11,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E,
-        0x01, 0x00, 0x00, 0x00, 0x00, 0x00
-    ]
-
-    lut_partial_update  = [
-        0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x0F, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    ]
-        
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200) 
-        epdconfig.digital_write(self.reset_pin, 0)
-        epdconfig.delay_ms(10)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200)   
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_data(self, data):
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-        
-    def ReadBusy(self):        
-        while(epdconfig.digital_read(self.busy_pin) == 1):      # 0: idle, 1: busy
-            epdconfig.delay_ms(100)            
-
-    def TurnOnDisplay(self):
-        self.send_command(0x22) # DISPLAY_UPDATE_CONTROL_2
-        self.send_data(0xC4)
-        self.send_command(0x20) # MASTER_ACTIVATION
-        self.send_command(0xFF) # TERMINATE_FRAME_READ_WRITE
-        
-        print("e-Paper busy")
-        self.ReadBusy()
-        print("e-Paper busy release")
-
-    def init(self, lut):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-        self.send_command(0x01) # DRIVER_OUTPUT_CONTROL
-        self.send_data((EPD_HEIGHT - 1) & 0xFF)
-        self.send_data(((EPD_HEIGHT - 1) >> 8) & 0xFF)
-        self.send_data(0x00) # GD = 0 SM = 0 TB = 0
-        
-        self.send_command(0x0C) # BOOSTER_SOFT_START_CONTROL
-        self.send_data(0xD7)
-        self.send_data(0xD6)
-        self.send_data(0x9D)
-        
-        self.send_command(0x2C) # WRITE_VCOM_REGISTER
-        self.send_data(0xA8) # VCOM 7C
-        
-        self.send_command(0x3A) # SET_DUMMY_LINE_PERIOD
-        self.send_data(0x1A) # 4 dummy lines per gate
-        
-        self.send_command(0x3B) # SET_GATE_TIME
-        self.send_data(0x08) # 2us per line
-        
-        self.send_command(0X3C) # BORDER_WAVEFORM_CONTROL
-        self.send_data(0x03)      
-        
-        self.send_command(0X11) # DATA_ENTRY_MODE_SETTING
-        self.send_data(0x03) # X increment; Y increment
-        
-        # WRITE_LUT_REGISTER
-        self.send_command(0x32)
-        for count in range(30):
-            self.send_data(lut[count])
-
-        return 0
-        
-##
- #  @brief: specify the memory area for data R/W
- ##
-    def SetWindows(self, x_start, y_start, x_end, y_end):
-        self.send_command(0x44) # SET_RAM_X_ADDRESS_START_END_POSITION
-        self.send_data((x_start >> 3) & 0xFF)
-        self.send_data((x_end >> 3) & 0xFF)
-        self.send_command(0x45) # SET_RAM_Y_ADDRESS_START_END_POSITION
-        self.send_data(y_start & 0xFF)
-        self.send_data((y_start >> 8) & 0xFF)
-        self.send_data(y_end & 0xFF)
-        self.send_data((y_end >> 8) & 0xFF)
-
-##
- #  @brief: specify the start point for data R/W
- ##
-    def SetCursor(self, x, y):
-        self.send_command(0x4E) # SET_RAM_X_ADDRESS_COUNTER
-        # x point must be the multiple of 8 or the last 3 bits will be ignored
-        self.send_data((x >> 3) & 0xFF)
-        self.send_command(0x4F) # SET_RAM_Y_ADDRESS_COUNTER
-        self.send_data(y & 0xFF)
-        self.send_data((y >> 8) & 0xFF)
-        self.ReadBusy()
-        
-    def getbuffer(self, image):
-        if self.width%8 == 0:
-            linewidth = self.width/8
-        else:
-            linewidth = self.width/8 + 1
-         
-        buf = [0xFF] * (linewidth * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-        
-        if(imwidth == self.width and imheight == self.height):
-            print("Vertical")
-            for y in range(imheight):
-                for x in range(imwidth):                    
-                    if pixels[x, y] == 0:
-                        # x = imwidth - x
-                        buf[x / 8 + y * linewidth] &= ~(0x80 >> (x % 8))
-        elif(imwidth == self.height and imheight == self.width):
-            print("Horizontal")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        # newy = imwidth - newy - 1
-                        buf[newx / 8 + newy*linewidth] &= ~(0x80 >> (y % 8))
-        return buf   
-
-        
-    def display(self, image):
-        if self.width%8 == 0:
-            linewidth = self.width/8
-        else:
-            linewidth = self.width/8 + 1
-
-        self.SetWindows(0, 0, self.width, self.height);
-        for j in range(0, self.height):
-            self.SetCursor(0, j);
-            self.send_command(0x24);
-            for i in range(0, linewidth):
-                self.send_data(image[i + j * linewidth])   
-        self.TurnOnDisplay()
-    
-    def Clear(self, color):
-        if self.width%8 == 0:
-            linewidth = self.width/8
-        else:
-            linewidth = self.width/8 + 1
-
-        self.SetWindows(0, 0, self.width, self.height);
-        for j in range(0, self.height):
-            self.SetCursor(0, j);
-            self.send_command(0x24);
-            for i in range(0, linewidth):
-                self.send_data(color)   
-        self.TurnOnDisplay()
-
-    def sleep(self):
-        self.send_command(0x10) #enter deep sleep
-        self.send_data(0x01)
-        epdconfig.delay_ms(100)
-         
-        epdconfig.module_exit()
-        
-### END OF FILE ###
-

Jetson Nano/python2/lib/epd2in13bc.py

@@ -1,158 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epd2in13bc.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V4.0
-# * | Date        :   2019-06-20
-# * | Info        :   python2 demo
-# ******************************************************************************/
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-import epdconfig
-
-# Display resolution
-EPD_WIDTH       = 104
-EPD_HEIGHT      = 212
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200) 
-        epdconfig.digital_write(self.reset_pin, 0)
-        epdconfig.delay_ms(10)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200)   
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_data(self, data):
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-        
-    def ReadBusy(self):
-        print("e-Paper busy")
-        while(epdconfig.digital_read(self.busy_pin) == 0):      # 0: idle, 1: busy
-            epdconfig.delay_ms(100)
-        print("e-Paper busy release")
-
-    def init(self):
-        if (epdconfig.module_init() != 0):
-            return -1
-            
-        self.reset()
-
-        self.send_command(0x06) # BOOSTER_SOFT_START
-        self.send_data(0x17)
-        self.send_data(0x17)
-        self.send_data(0x17)
-        
-        self.send_command(0x04) # POWER_ON
-        self.ReadBusy()
-        
-        self.send_command(0x00) # PANEL_SETTING
-        self.send_data(0x8F)
-        
-        self.send_command(0x50) # VCOM_AND_DATA_INTERVAL_SETTING
-        self.send_data(0xF0)
-        
-        self.send_command(0x61) # RESOLUTION_SETTING
-        self.send_data(self.width & 0xff)
-        self.send_data(self.height >> 8)
-        self.send_data(self.height & 0xff)
-        return 0
-
-    def getbuffer(self, image):
-        # print "bufsiz = ",(self.width/8) * self.height
-        buf = [0xFF] * ((self.width/8) * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-        # print "imwidth = %d, imheight = %d",imwidth,imheight
-        if(imwidth == self.width and imheight == self.height):
-            print("Vertical")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    # Set the bits for the column of pixels at the current position.
-                    if pixels[x, y] == 0:
-                        buf[(x + y * self.width) / 8] &= ~(0x80 >> (x % 8))
-        elif(imwidth == self.height and imheight == self.width):
-            print("Horizontal")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        buf[(newx + newy*self.width) / 8] &= ~(0x80 >> (y % 8))
-        return buf
-
-    def display(self, imageblack, imagered):
-        self.send_command(0x10)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(imageblack[i])
-        self.send_command(0x92)
-        
-        self.send_command(0x13)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(imagered[i])
-        self.send_command(0x92)
-        
-        self.send_command(0x12) # REFRESH
-        self.ReadBusy()
-        
-    def Clear(self):
-        self.send_command(0x10)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0xFF)
-        self.send_command(0x92) 
-        
-        self.send_command(0x13)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0xFF)
-        self.send_command(0x92)
-        
-        self.send_command(0x12) # REFRESH
-        self.ReadBusy()
-
-    def sleep(self):
-        self.send_command(0x02) # POWER_OFF
-        self.ReadBusy()
-        self.send_command(0x07) # DEEP_SLEEP
-        self.send_data(0xA5) # check code
-        
-        epdconfig.module_exit()
-### END OF FILE ###
-

Jetson Nano/python2/lib/epd2in13d.py

@@ -1,357 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epd2in13d.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V4.0
-# * | Date        :   2019-06-20
-# * | Info        :   python2 demo
-# ******************************************************************************/
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-
-import epdconfig
-from PIL import Image
-import RPi.GPIO as GPIO
-
-# Display resolution
-EPD_WIDTH       = 104
-EPD_HEIGHT      = 212
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    lut_vcomDC = [  
-        0x00, 0x08, 0x00, 0x00, 0x00, 0x02,
-        0x60, 0x28, 0x28, 0x00, 0x00, 0x01,
-        0x00, 0x14, 0x00, 0x00, 0x00, 0x01,
-        0x00, 0x12, 0x12, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00,
-    ]
-
-    lut_ww = [  
-        0x40, 0x08, 0x00, 0x00, 0x00, 0x02,
-        0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
-        0x40, 0x14, 0x00, 0x00, 0x00, 0x01,
-        0xA0, 0x12, 0x12, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_bw = [  
-        0x40, 0x17, 0x00, 0x00, 0x00, 0x02,
-        0x90, 0x0F, 0x0F, 0x00, 0x00, 0x03,
-        0x40, 0x0A, 0x01, 0x00, 0x00, 0x01,
-        0xA0, 0x0E, 0x0E, 0x00, 0x00, 0x02,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_wb = [
-        0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
-        0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
-        0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
-        0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_bb = [ 
-        0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
-        0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
-        0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
-        0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-    
-    lut_vcom1 = [  
-        0x00, 0x19, 0x01, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00,
-    ]
-
-    lut_ww1 = [  
-        0x00, 0x19, 0x01, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_bw1 = [  
-        0x80, 0x19, 0x01, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_wb1 = [
-        0x40, 0x19, 0x01, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_bb1 = [ 
-        0x00, 0x19, 0x01, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-        
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200) 
-        epdconfig.digital_write(self.reset_pin, 0)
-        epdconfig.delay_ms(10)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200)   
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_data(self, data):
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-        
-    def ReadBusy(self):
-        print("e-Paper busy")
-        while(epdconfig.digital_read(self.busy_pin) == 0):      # 0: idle, 1: busy
-            self.send_command(0x71)
-            epdconfig.delay_ms(100)  
-        print("e-Paper busy release")
-        
-    def TurnOnDisplay(self):
-        self.send_command(0x12)
-        epdconfig.delay_ms(10)
-        self.ReadBusy()
-        
-    def init(self):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-        
-        self.send_command(0x01)	# POWER SETTING
-        self.send_data(0x03)
-        self.send_data(0x00)
-        self.send_data(0x2b)
-        self.send_data(0x2b)
-        self.send_data(0x03)
-
-        self.send_command(0x06)	# boost soft start
-        self.send_data(0x17) # A
-        self.send_data(0x17) # B
-        self.send_data(0x17) # C
-
-        self.send_command(0x04)
-        self.ReadBusy()
-
-        self.send_command(0x00)	# panel setting
-        self.send_data(0xbf) # LUT from OTP,128x296
-        self.send_data(0x0d) # VCOM to 0V fast
-
-        self.send_command(0x30)	# PLL setting
-        self.send_data(0x3a) # 3a 100HZ   29 150Hz 39 200HZ	31 171HZ
-
-        self.send_command(0x61)	# resolution setting
-        self.send_data(self.width)
-        self.send_data((self.height >> 8) & 0xff)
-        self.send_data(self.height& 0xff)
-
-        self.send_command(0x82)	# vcom_DC setting
-        self.send_data(0x28)
-        return 0
-        
-    def SetFullReg(self):
-        self.send_command(0x82)
-        self.send_data(0x00)
-        self.send_command(0X50)
-        self.send_data(0x97)
-        
-        self.send_command(0x20) # vcom
-        for count in range(0, 44):
-            self.send_data(self.lut_vcomDC[count])
-        self.send_command(0x21) # ww --
-        for count in range(0, 42):
-            self.send_data(self.lut_ww[count])
-        self.send_command(0x22) # bw r
-        for count in range(0, 42):
-            self.send_data(self.lut_bw[count])
-        self.send_command(0x23) # wb w
-        for count in range(0, 42):
-            self.send_data(self.lut_wb[count])
-        self.send_command(0x24) # bb b
-        for count in range(0, 42):
-            self.send_data(self.lut_bb[count])
-    
-    def SetPartReg(self):
-        self.send_command(0x82)
-        self.send_data(0x03)
-        self.send_command(0X50)
-        self.send_data(0x47)
-        
-        self.send_command(0x20) # vcom
-        for count in range(0, 44):
-            self.send_data(self.lut_vcom1[count])
-        self.send_command(0x21) # ww --
-        for count in range(0, 42):
-            self.send_data(self.lut_ww1[count])
-        self.send_command(0x22) # bw r
-        for count in range(0, 42):
-            self.send_data(self.lut_bw1[count])
-        self.send_command(0x23) # wb w
-        for count in range(0, 42):
-            self.send_data(self.lut_wb1[count])
-        self.send_command(0x24) # bb b
-        for count in range(0, 42):
-            self.send_data(self.lut_bb1[count])
-
-    def getbuffer(self, image):
-        # print "bufsiz = ",(self.width/8) * self.height
-        buf = [0xFF] * ((self.width/8) * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-        # print "imwidth = %d, imheight = %d",imwidth,imheight
-        if(imwidth == self.width and imheight == self.height):
-            print "Vertical"
-            for y in range(imheight):
-                for x in range(imwidth):
-                    # Set the bits for the column of pixels at the current position.
-                    if pixels[x, y] == 0:
-                        buf[(x + y * self.width) / 8] &= ~(0x80 >> (x % 8))
-        elif(imwidth == self.height and imheight == self.width):
-            print "Horizontal"
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        buf[(newx + newy*self.width) / 8] &= ~(0x80 >> (y % 8))
-        return buf
-
-    def display(self, image):
-        if (Image == None):
-			return
-            
-        self.send_command(0x10)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0x00)
-        epdconfig.delay_ms(10)
-        
-        self.send_command(0x13)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(image[i])
-        epdconfig.delay_ms(10)
-        
-        self.SetFullReg()
-        self.TurnOnDisplay()
-        
-    def DisplayPartial(self, image):   
-        if (Image == None):
-			return
-            
-        self.SetPartReg()
-        self.send_command(0x91)
-        self.send_command(0x90)
-        self.send_data(0)
-        self.send_data(self.width - 1)
-
-        self.send_data(0)
-        self.send_data(0)
-        self.send_data(self.height / 256)
-        self.send_data(self.height % 256 - 1)
-        self.send_data(0x28)
-            
-        self.send_command(0x10)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(image[i])
-        epdconfig.delay_ms(10)
-        
-        self.send_command(0x13)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(~image[i])
-        epdconfig.delay_ms(10)
-          
-        self.TurnOnDisplay()
-        
-    def Clear(self, color):
-        self.send_command(0x10)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0x00)
-        epdconfig.delay_ms(10)
-        
-        self.send_command(0x13)
-        for i in range(0, self.width * self.height / 8):
-            self.send_data(0xFF)
-        epdconfig.delay_ms(10)
-        
-        self.SetFullReg()
-        self.TurnOnDisplay()
-
-    def sleep(self):
-        self.send_command(0X50)
-        self.send_data(0xf7)
-        self.send_command(0X02) # power off
-        self.send_command(0X07) # deep sleep  
-        self.send_data(0xA5)
-
-        epdconfig.module_exit()
-
-### END OF FILE ###
-