include config.mk

RASPI_REMOTE?=${RASPI_USER}@${RASPI_IP}

run:
	ssh pi@${RASPI_IP} "cd ${DEPLOY_DIR};./bin/simpi.py ${ARGS}"

rerun: update run

deploy: bcmlib wiringpi pythonlib

update:
	ssh ${RASPI_REMOTE} mkdir -p ${DEPLOY_DIR}/sub/
	rsync -ai Makefile config.mk simpilib bin ${RASPI_REMOTE}:${DEPLOY_DIR}/
	rsync -ai --delete sub/wavesharelib/RaspberryPi\&JetsonNano/python/ ${RASPI_REMOTE}:${DEPLOY_DIR}/wavesharelib/

install_ssh: update remote/deploy

ssh/%:
	ssh ${RASPI_REMOTE} "cd raspi-zero-waveshare;./bin/simpi.py ${*}"

remote/%:
	ssh ${RASPI_REMOTE} "cd raspi-zero-waveshare;$(MAKE) ${*}"

bcmlib:
	wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.60.tar.gz
	tar zxvf bcm2835-1.60.tar.gz
	cd bcm2835-1.60/ && \
	sudo ./configure && \
	sudo make && \
	sudo make check && \
	sudo make install
	#For more details, please refer to http://www.airspayce.com/mikem/bcm2835/

wiringpi:
	sudo apt-get install wiringpi
	#For Pi 4, you need to update it：
	wget https://project-downloads.drogon.net/wiringpi-latest.deb
	sudo dpkg -i wiringpi-latest.deb
	rm -rf wiringpi-latest.deb
	gpio -v
	#You will get 2.52 information if you install it correctly

pythonlib:
	#python3
	sudo apt-get update
	sudo apt-get install python3-pip python3-pil python3-numpy
	sudo pip3 install RPi.GPIO spidev

# demo-py/%:
# 	cd e-Paper/RaspberryPi\&JetsonNano/python/examples && sudo python3 ${*}
# 
# demo-c:
# 	$(MAKE) -C e-Paper/RaspberryPi\&JetsonNano/c/ clean
# 	$(MAKE) -C e-Paper/RaspberryPi\&JetsonNano/c/
# 	cd e-Paper/RaspberryPi\&JetsonNano/c/ && ./epd
#