include config.mk

test:
	python3 test.py

deply: bcmlib wiringpi pythonlib

update: wavesharelib
	rsync -ai --delete bin/ pi@${RASPI_IP}:raspi-zero-waveshare/bin/
	rsync -ai --delete lib/ pi@${RASPI_IP}:raspi-zero-waveshare/lib/
	rsync -ai --delete wavesharelib/RaspberryPi\&JetsonNano/python/ pi@${RASPI_IP}:raspi-zero-waveshare/wavesharelib/

run/%:
	ssh pi@${RASPI_IP} "cd raspi-zero-waveshare;./bin/${*}.py ${ARGS}"

ssh/%:
	ssh pi@${RASPI_IP} "cd raspi-zero-waveshare;${*}"

remote/%:
	ssh pi@${RASPI_IP} "cd raspi-zero-waveshare;$(MAKE) ${*}"

bcmlib:
	wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.60.tar.gz
	tar zxvf bcm2835-1.60.tar.gz
	cd bcm2835-1.60/ && \
	sudo ./configure && \
	sudo make && \
	sudo make check && \
	sudo make install
	#For more details, please refer to http://www.airspayce.com/mikem/bcm2835/

wiringpi:
	sudo apt-get install wiringpi
	#For Pi 4, you need to update it：
	wget https://project-downloads.drogon.net/wiringpi-latest.deb
	sudo dpkg -i wiringpi-latest.deb
	rm -rf wiringpi-latest.deb
	gpio -v
	#You will get 2.52 information if you install it correctly

pythonlib:
	#python3
	sudo apt-get update
	sudo apt-get install python3-pip python3-pil python3-numpy
	sudo pip3 install RPi.GPIO spidev

wavesharelib:
	git clone https://github.com/waveshare/e-Paper wavesharelib

demo-py/%:
	cd e-Paper/RaspberryPi\&JetsonNano/python/examples && sudo python3 ${*}

demo-c:
	$(MAKE) -C e-Paper/RaspberryPi\&JetsonNano/c/ clean
	$(MAKE) -C e-Paper/RaspberryPi\&JetsonNano/c/
	cd e-Paper/RaspberryPi\&JetsonNano/c/ && ./epd